- 论坛徽章:
- 0
|
公司有一台型号Spectra Logic T50的磁带库用于存储视频资料,每次在回放视频文件时,经常卡带,请高手帮忙诊断一下\r\n=============================\r\n#8 - Fatal - 14:21 2/23/2009 Select: \r\n \r\n Library initialization failed. \r\n Remedy: Review all other error messages; fix the problem if possible, otherwise report failure to technical support. After the problem is fixed, power cycle the library. \r\n \r\n--------------------------------------------------------------------------------\r\n \r\n #7 - Error - 14:21 2/23/2009 Select: \r\n \r\n Low level error - Physical geometry failed updating logical geometry. (---- Error: RCM Motion is not possible ) \r\n Remedy: Report failure to technical support. \r\n \r\n--------------------------------------------------------------------------------\r\n \r\n #6 - Fatal - 14:21 2/23/2009 Select: \r\n \r\n RCM Motion is not possible \r\n Remedy: Check messages to determine motion failure. Take action as appropriate. Otherwise, report failure to technical support. \r\n \r\n--------------------------------------------------------------------------------\r\n \r\n #5 - Fatal - 14:21 2/23/2009 Select: \r\n \r\n RCM Motion is not possible \r\n Remedy: Check messages to determine motion failure. Take action as appropriate. Otherwise, report failure to technical support. \r\n \r\n--------------------------------------------------------------------------------\r\n \r\n #4 - Fatal - 14:21 2/23/2009 Select: \r\n \r\n Received message from RCM Motion: The robot encountered a problem it could not recover from. (16) \r\n Remedy: Examine other error messages, take appropriate action if needed, and power-cycle the library. \r\n \r\n--------------------------------------------------------------------------------\r\n \r\n #3 - Error - 14:21 2/23/2009 Select: \r\n \r\n Received message from RCM Motion: The robot elevator was blocked during movement. (2 \r\n Remedy: Determine source of obstruction and power cycle library \r\n \r\n--------------------------------------------------------------------------------\r\n \r\n #2 - Warning - 14:19 2/23/2009 Select: \r\n \r\n User admin failed login attempt from 127.0.0.1 client webserver \r\n Remedy: No action required. \r\n \r\n--------------------------------------------------------------------------------\r\n \r\n #1 - Warning - 14:18 2/23/2009 Select: \r\n \r\n No active service key present. You cannot upgrade your library firmware. \r\n Remedy: If your library is covered by a support contract, contact technical support to obtain new key. If your contract has expired, contact your sales representative for renewal. |
|