vlan设置命令 tb-vlan1 是何意思高手请进

whd

SESC_L3(vlan)#vlan 10 tb-vlan1 3 ?\r\n  are        Maximum number of All Route Explorer hops for this VLAN\r\n  backupcrf  Backup CRF mode of the VLAN\r\n  bridge     Bridging characteristics of the VLAN\r\n  media      Media type of the VLAN\r\n  mtu        VLAN Maximum Transmission Unit\r\n  name       Ascii name of the VLAN\r\n  parent     ID number of the Parent VLAN of FDDI or Token Ring type VLANs\r\n  ring       Ring number of FDDI or Token Ring type VLANs\r\n  said       IEEE 802.10 SAID\r\n  state      Operational state of the VLAN\r\n  ste        Maximum number of Spanning Tree Explorer hops for this VLAN\r\n  stp        Spanning tree characteristics of the VLAN\r\n  tb-vlan2   ID number of the second translational VLAN for this VLAN (or zero if none)\r\n  <cr>;\r\n\r\n如上，4506交换机设置vlan时发现这些命令，请问是否tb命令就是plvan的另一种形式， 设置tb-vlan1和tb-vlan2 是否就是保证这两个vlan中的数据也能在vlan10里传送，达到vmps的效果。

whd

上边的有点乱，再发试试。\r\nSESC_L3(vlan)#vlan 10 tb-vlan1 3 ?\r\n  are           Maximum number of All Route Explorer hops for this VLAN\r\n  backupcrf  Backup CRF mode of the VLAN\r\n  bridge       Bridging characteristics of the VLAN\r\n  media       Media type of the VLAN\r\n  mtu           VLAN Maximum Transmission Unit\r\n  name        Ascii name of the VLAN\r\n  parent      ID number of the Parent VLAN of FDDI or Token Ring type VLANs\r\n  ring           Ring number of FDDI or Token Ring type VLANs\r\n  said          IEEE 802.10 SAID\r\n  state        Operational state of the VLAN\r\n  ste            Maximum number of Spanning Tree Explorer hops for this VLAN\r\n  stp           Spanning tree characteristics of the VLAN\r\n  tb-vlan2   ID number of the second translational VLAN for this VLAN (or zero if none)\r\n  <cr>;

cnadl

tb-vlan顾名思义，就是透明桥接的vlan，建议你不要考虑这个方法。