- 论坛徽章:
- 0
|
本帖最后由 chengqingtanyue 于 2013-03-11 01:40 编辑
回复 2# gvim
我用UltraISO 在netbsd的安裝光盤加了/source/set/和其目錄下的文件。發現超出了ISO文件的容量,後來加大容量到下一個默認,另存為。好了。有一個自製的ISO文件了。
接著在WIN7下用VMWARE 安裝進不了安裝程序。
30.5. Sources on CD (ISO)
If you prefer to download (and maybe burn) a CD-ROM image with the NetBSD source, just fetch sourcecd-<RELEASE-NUMBER>.iso from ftp.NetBSD.org or any other mirror.
The sourcecd-<RELEASE-NUMBER>.iso file is located under /pub/NetBSD/iso/<RELEASE>, where <RELEASE-NUMBER> is a release of NetBSD, for example, 5.1:
ftp://ftp.NetBSD.org/pub/NetBSD/iso/5.1/sourcecd-5.1.isoThe next step is to burn the ISO image or mount it with the help of vnconfig( . Please see Chapter 13, Using removable media as it explains in detail how to do it.
Assuming you have mounted the CD under /mnt, /mnt/source/sets should have everything you need to extract:
$ ls /mnt/source/sets
BSDSUM MD5 gnusrc.tgz src.tgz xsrc.tgz
CKSUM SYSVSUM sharesrc.tgz syssrc.tgz
All tarballs should be extracted to the root file system (/). The following command will do it:
$ foreach file (*.tgz)
? tar -xzf $file -C /
? end
結果如下圖,請教怎麼辦,多謝。 :
另說一點。我用UltraISO 加大了OPENBSD5.2 的BOOTONLY 的容量,但裡面沒有加東西。結果安裝OPENBSD 成功。
一個原因是不是,我用UltraISO加大了容量導致安裝如上圖失敗呢? |
|