是不是说硬盘要坏了啊？

fender0107401

一块老硬盘，500G的，貌似是STAT 2.6的。

机器是新的，主板上面有STAT 2.0 和 3.0的接口。

接在3.0那个上面，发现有时开不了机器，提示找不到启动的硬盘。

现在接到2.0上面了，dmesg里面有这些提示。


[   17.275284] ata5.00: exception Emask 0x10 SAct 0x380000 SErr 0x400100 action 0x6 frozen
[   17.275286] ata5.00: irq_stat 0x08000000, interface fatal error
[   17.275288] ata5: SError: { UnrecovData Handshk }
[   17.275290] ata5.00: failed command: WRITE FPDMA QUEUED
[   17.275292] ata5.00: cmd 61/18:98:00:f1:5a/00:00:1c:00:00/40 tag 19 ncq 12288 out
         res 40/00:a8:30:f1:5b/00:00:1c:00:00/40 Emask 0x10 (ATA bus error)
[   17.275293] ata5.00: status: { DRDY }
[   17.275294] ata5.00: failed command: WRITE FPDMA QUEUED
[   17.275296] ata5.00: cmd 61/08:a0:00:f1:5b/00:00:1c:00:00/40 tag 20 ncq 4096 out
         res 40/00:a8:30:f1:5b/00:00:1c:00:00/40 Emask 0x10 (ATA bus error)
[   17.275297] ata5.00: status: { DRDY }
[   17.275298] ata5.00: failed command: WRITE FPDMA QUEUED
[   17.275299] ata5.00: cmd 61/08:a8:30:f1:5b/00:00:1c:00:00/40 tag 21 ncq 4096 out
         res 40/00:a8:30:f1:5b/00:00:1c:00:00/40 Emask 0x10 (ATA bus error)
[   17.275300] ata5.00: status: { DRDY }
[   17.275302] ata5: hard resetting link
[   17.598828] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   17.600084] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   17.600086] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   17.600087] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   17.602607] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   17.602609] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   17.602610] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   17.603768] ata5.00: configured for UDMA/133
[   17.603773] ata5: EH complete
[   29.342287] ata5.00: exception Emask 0x10 SAct 0x7800000 SErr 0x400100 action 0x6 frozen
[   29.342290] ata5.00: irq_stat 0x08000000, interface fatal error
[   29.342291] ata5: SError: { UnrecovData Handshk }
[   29.342293] ata5.00: failed command: WRITE FPDMA QUEUED
[   29.342296] ata5.00: cmd 61/08:b8:28:c2:70/00:00:2e:00:00/40 tag 23 ncq 4096 out
         res 40/00:d0:40:f0:33/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[   29.342297] ata5.00: status: { DRDY }
[   29.342298] ata5.00: failed command: READ FPDMA QUEUED
[   29.342299] ata5.00: cmd 60/08:c0:00:98:05/00:00:00:00:00/40 tag 24 ncq 4096 in
         res 40/00:d0:40:f0:33/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[   29.342300] ata5.00: status: { DRDY }
[   29.342301] ata5.00: failed command: READ FPDMA QUEUED
[   29.342303] ata5.00: cmd 60/08:c8:20:8f:38/00:00:02:00:00/40 tag 25 ncq 4096 in
         res 40/00:d0:40:f0:33/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[   29.342304] ata5.00: status: { DRDY }
[   29.342304] ata5.00: failed command: READ FPDMA QUEUED
[   29.342306] ata5.00: cmd 60/08:d0:40:f0:33/00:00:02:00:00/40 tag 26 ncq 4096 in
         res 40/00:d0:40:f0:33/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[   29.342307] ata5.00: status: { DRDY }
[   29.342309] ata5: hard resetting link
[   29.661859] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   29.663111] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   29.663113] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   29.663114] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   29.665603] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   29.665605] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   29.665606] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   29.666761] ata5.00: configured for UDMA/133
[   29.666769] ata5: EH complete
[   32.082446] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x004f0600
[   32.625694] ata5.00: exception Emask 0x10 SAct 0x7ffffffc SErr 0x400100 action 0x6 frozen
[   32.625697] ata5.00: irq_stat 0x08000000, interface fatal error
[   32.625698] ata5: SError: { UnrecovData Handshk }
[   32.625700] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625702] ata5.00: cmd 61/08:10:a0:f8:6e/00:00:0e:00:00/40 tag 2 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625703] ata5.00: status: { DRDY }
[   32.625704] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625706] ata5.00: cmd 61/08:18:98:f8:6e/00:00:0e:00:00/40 tag 3 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625707] ata5.00: status: { DRDY }
[   32.625707] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625709] ata5.00: cmd 61/08:20:48:80:5f/00:00:1c:00:00/40 tag 4 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625710] ata5.00: status: { DRDY }
[   32.625711] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625712] ata5.00: cmd 61/08:28:40:80:5f/00:00:1c:00:00/40 tag 5 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625713] ata5.00: status: { DRDY }
[   32.625714] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625716] ata5.00: cmd 61/e8:30:70:0e:a3/00:00:10:00:00/40 tag 6 ncq 118784 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625716] ata5.00: status: { DRDY }
[   32.625717] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625719] ata5.00: cmd 61/08:38:30:00:a1/00:00:10:00:00/40 tag 7 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625720] ata5.00: status: { DRDY }
[   32.625720] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625722] ata5.00: cmd 61/08:40:e0:f1:6e/00:00:0e:00:00/40 tag 8 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625723] ata5.00: status: { DRDY }
[   32.625724] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625725] ata5.00: cmd 61/08:48:38:a0:a3/00:00:10:00:00/40 tag 9 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625726] ata5.00: status: { DRDY }
[   32.625727] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625728] ata5.00: cmd 61/08:50:c0:27:5c/00:00:05:00:00/40 tag 10 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625729] ata5.00: status: { DRDY }
[   32.625730] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625732] ata5.00: cmd 61/08:58:00:01:6f/00:00:0e:00:00/40 tag 11 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625733] ata5.00: status: { DRDY }
[   32.625733] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625735] ata5.00: cmd 61/08:60:f8:00:6f/00:00:0e:00:00/40 tag 12 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625736] ata5.00: status: { DRDY }
[   32.625737] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625738] ata5.00: cmd 61/08:68:80:f0:9a/00:00:10:00:00/40 tag 13 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625739] ata5.00: status: { DRDY }
[   32.625740] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625741] ata5.00: cmd 61/08:70:30:f1:9a/00:00:10:00:00/40 tag 14 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625742] ata5.00: status: { DRDY }
[   32.625743] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625744] ata5.00: cmd 61/08:78:48:f1:9a/00:00:10:00:00/40 tag 15 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625745] ata5.00: status: { DRDY }
[   32.625746] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625748] ata5.00: cmd 61/08:80:70:f1:9a/00:00:10:00:00/40 tag 16 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625749] ata5.00: status: { DRDY }
[   32.625749] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625751] ata5.00: cmd 61/08:88:88:f2:9a/00:00:10:00:00/40 tag 17 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625752] ata5.00: status: { DRDY }
[   32.625752] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625754] ata5.00: cmd 61/08:90:30:f4:9a/00:00:10:00:00/40 tag 18 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625755] ata5.00: status: { DRDY }
[   32.625756] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625757] ata5.00: cmd 61/08:98:80:f6:9a/00:00:10:00:00/40 tag 19 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625758] ata5.00: status: { DRDY }
[   32.625759] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625760] ata5.00: cmd 61/08:a0:f0:f6:9a/00:00:10:00:00/40 tag 20 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625761] ata5.00: status: { DRDY }
[   32.625762] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625764] ata5.00: cmd 61/08:a8:90:03:5f/00:00:1c:00:00/40 tag 21 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625764] ata5.00: status: { DRDY }
[   32.625765] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625767] ata5.00: cmd 61/08:b0:40:04:5f/00:00:1c:00:00/40 tag 22 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625768] ata5.00: status: { DRDY }
[   32.625768] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625770] ata5.00: cmd 61/08:b8:00:f0:5a/00:00:1e:00:00/40 tag 23 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625771] ata5.00: status: { DRDY }
[   32.625772] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625773] ata5.00: cmd 61/08:c0:80:f0:5a/00:00:1e:00:00/40 tag 24 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625774] ata5.00: status: { DRDY }
[   32.625775] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625776] ata5.00: cmd 61/08:c8:00:f1:5a/00:00:1e:00:00/40 tag 25 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625777] ata5.00: status: { DRDY }
[   32.625778] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625780] ata5.00: cmd 61/18:d0:00:f1:5b/00:00:1e:00:00/40 tag 26 ncq 12288 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625781] ata5.00: status: { DRDY }
[   32.625781] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625783] ata5.00: cmd 61/08:d8:18:f1:5a/00:00:1c:00:00/40 tag 27 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625784] ata5.00: status: { DRDY }
[   32.625785] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625786] ata5.00: cmd 61/08:e0:00:f1:5a/00:00:1c:00:00/40 tag 28 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625787] ata5.00: status: { DRDY }
[   32.625788] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625789] ata5.00: cmd 61/08:e8:b8:f7:9b/00:00:10:00:00/40 tag 29 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625790] ata5.00: status: { DRDY }
[   32.625791] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.625793] ata5.00: cmd 61/08:f0:70:f6:9b/00:00:10:00:00/40 tag 30 ncq 4096 out
         res 40/00:f0:70:f6:9b/00:00:10:00:00/40 Emask 0x10 (ATA bus error)
[   32.625793] ata5.00: status: { DRDY }
[   32.625795] ata5: hard resetting link
[   32.945239] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   32.946514] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   32.946516] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   32.946517] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   32.949037] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   32.949039] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   32.949040] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   32.950165] ata5.00: configured for UDMA/133
[   32.950192] ata5: EH complete
[   32.965229] ata5: limiting SATA link speed to 1.5 Gbps
[   32.965232] ata5.00: exception Emask 0x10 SAct 0x1f000000 SErr 0x400100 action 0x6 frozen
[   32.965233] ata5.00: irq_stat 0x08000000, interface fatal error
[   32.965235] ata5: SError: { UnrecovData Handshk }
[   32.965237] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.965249] ata5.00: cmd 61/e8:c0:70:0e:a3/00:00:10:00:00/40 tag 24 ncq 118784 out
         res 40/00:e0:a0:f8:6e/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   32.965251] ata5.00: status: { DRDY }
[   32.965251] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.965253] ata5.00: cmd 61/08:c8:40:80:5f/00:00:1c:00:00/40 tag 25 ncq 4096 out
         res 40/00:e0:a0:f8:6e/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   32.965254] ata5.00: status: { DRDY }
[   32.965255] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.965257] ata5.00: cmd 61/08:d0:48:80:5f/00:00:1c:00:00/40 tag 26 ncq 4096 out
         res 40/00:e0:a0:f8:6e/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   32.965258] ata5.00: status: { DRDY }
[   32.965258] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.965260] ata5.00: cmd 61/08:d8:98:f8:6e/00:00:0e:00:00/40 tag 27 ncq 4096 out
         res 40/00:e0:a0:f8:6e/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   32.965261] ata5.00: status: { DRDY }
[   32.965261] ata5.00: failed command: WRITE FPDMA QUEUED
[   32.965263] ata5.00: cmd 61/08:e0:a0:f8:6e/00:00:0e:00:00/40 tag 28 ncq 4096 out
         res 40/00:e0:a0:f8:6e/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   32.965264] ata5.00: status: { DRDY }
[   32.965265] ata5: hard resetting link
[   33.284763] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   33.286053] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   33.286055] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   33.286066] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   33.288639] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   33.288641] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   33.288643] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   33.289799] ata5.00: configured for UDMA/133
[   33.289830] ata5: EH complete

fender0107401

> uname -a
Linux PC-886 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17) x86_64 GNU/Linux

smartctl -a /dev/sda
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST3500413AS
Serial Number:    6VMT7QCB
LU WWN Device Id: 5 000c50 0366eb6cf
Firmware Version: JC45
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Tue Feb 16 22:15:09 2016 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)        Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)        The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (  609) seconds.
Offline data collection
capabilities:                          (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003)        Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01)        Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:          (   1) minutes.
Extended self-test routine
recommended polling time:          (  87) minutes.
Conveyance self-test routine
recommended polling time:          (   2) minutes.
SCT capabilities:                (0x103f)        SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   118   099   006    Pre-fail  Always       -       186540335
  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1507
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always       -       77669632
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2216
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1511
183 Runtime_Bad_Block       0x0032   070   070   000    Old_age   Always       -       30
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   021   000    Old_age   Always       -       387
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   070   050   045    Old_age   Always       -       30 (Min/Max 28/31)
194 Temperature_Celsius     0x0022   030   050   000    Old_age   Always       -       30 (0 3 0 0 0)
195 Hardware_ECC_Recovered  0x001a   040   026   000    Old_age   Always       -       186540335
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       62
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       5975 (146 218 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       3711396202
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3201670923

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

rtm009

mhdd 扫一下就是了 服务器用sata硬盘 无语啊！

fender0107401

回复 3# rtm009

其实是台式机，全CU貌似只有这里能讨论硬件。


   

rtm009

回复 4# fender0107401


    不管是什么机器 硬盘单独可以用mhdd扫描的 现在的人很少费时费力的去这么做了 不到起不来都不知道有问题！只有老玩家和js才会想到用mhdd的！还有就是硬盘太便宜了 不值得浪费这时间！