HELP！一个关于PIX防火墙的问题，急用

missyou

PIX的内网ping不通外网，我已经放开了N多权限了，检查了半天也没检查出什么问题，请大家帮我看看，急用，谢谢了。配置如下
   PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password mBat5bTIzhRcVYHL encrypted
passwd mBat5bTIzhRcVYHL encrypted
hostname yjpix
domain-name yj
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list acl-in permit tcp any any
access-list acl-in permit icmp any any
access-list acl-in permit ip any any
access-list acl-in permit udp any any
access-list acl-out permit icmp any any
access-list acl-out permit tcp any any
access-list acl-out permit ip any any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.192.191.1 255.255.255.0
ip address inside 192.168.1.20 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
no failover
failover timeout 0:00:00
failover poll 15
no failover ip address outside
no failover ip address inside
pdm history enable
arp timeout 14400
global (outside) 1 192.192.191.100
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
static (inside,outside) 192.192.191.100 192.168.1.2 netmask 255.255.255.255 0 0
access-group acl-out in interface outside
access-group acl-in in interface inside
conduit permit icmp any any
route outside 0.0.0.0 0.0.0.0 192.192.191.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 192.192.191.0 255.255.255.0 outside
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:beee09bda7ac7aebe5329fe20f2b5aab
: end

dooza

我觉得你的acl-out和acl-in需要在outside和inside上都要应用！
而不是acl-out用在outside上，acl-in用在inside上。

zhangyan_ou

global (outside) 1 192.192.191.100
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
static (inside,outside) 192.192.191.100 192.168.1.2 netmask 255.255.255.255 0 0
你用192。168。1。2这个地址能不能ping出去，你做得NAT和Static冲突。