哪位大侠有SUN连接HP EVA3000的经验

sopato

一个项目要用SUN solaris8连接HP的EVA3000，无奈HP的哥们说没有连接SUN的经验（晕），从SUN网站和HP网站都找不到相关的资料，所以向各位求援来了。

谢谢各位，有资料或信息请发给sopato@163.com。

stray_xu

两年多没玩过SUN了,我快忘光了...
记得进操作系统后,应该是format,看能不能找到磁盘阵列.如果LUN号太多的号,应该找到一个SD.CONFIG还是SDCONFIG文件(忘记了,不好意思)进行编辑,在里面添加LUN号...如果有台SUN我可以把这个给你写出来该如何编辑,这里我写不出来,都忘光了,不好意思.

Basten

EVA3000双控的话，是要买多路径冗余软件吧……Solaris里面装了以后才能正常使用吧。

Solaris缺省不识别LUN 〉1的设备，是需要修改 sd.config，然后 reboot -r，其它的……忘了#￥%……—*（

James_wen

一般情况下可以直接认到啊

sopato

按我的观点和小小的经验也是连接正常后就能直接认到裸设备，然后分区做文件系统就搞定了，HP的哥们还在打问题问同事，我就比较纳闷为何他们的设备好像没有在这个平台上做过测试一样。如果有案例文档我就自己搞完算了，这次连google也帮不了我了。

nntp

楼上的同学，是哪个HP的工程师说不支持? 告诉我名字.

请仔细核对下面的信息，是否符合你的环境

EVA 3000 完全支持Solaris.

详细支持信息如下:

OS
SUN:Solaris( OS Patch:108435-13 OS Patch:108528-23 OS Patch:108987-13 OS Patch:108989-02 OS Patch:108993-22 OS
Patch:109147-24 OS Patch:109793-19 OS Patch:110386-03 OS Patch:110794-05 OS Patch:110826-07 OS Patch:110836-05 OS
Patch:110837-04 OS Patch:110838-06 OS Patch:110912-03 OS Patch:111023-02 OS Patch:111049-05 OS Patch:111111-03 OS
Patch:111310-01 OS Patch:111335-16 OS Patch:112396-02

Host See compatibility matrices below
Many servers require a minimum release level of the Operating System. See the Sun website or the server's documentation for specific
requirements.
SUN:E10000 - PCI and/or sBus, check customer configuration SUN:E220R - PCI only
SUN:E250 - PCI only SUN:E3000 - PCI and/or sBus, check customer configuration
SUN:E3500 - PCI and/or sBus, check customer configuration SUN:E4000 - PCI and/or sBus, check customer configuration
SUN:E420R - PCI only SUN:E450 - PCI only
SUN:E4500 - PCI and/or sBus, check customer configuration SUN:E5000 - PCI and/or sBus, check customer configuration
SUN:E5500 - PCI and/or sBus, check customer configuration SUN:E6000 - PCI and/or sBus, check customer configuration
SUN:E6500 - PCI and/or sBus, check customer configuration SUN:SunFire 12K
SUN:SunFire 15K SUN:SunFire 280R
SUN:SunFire 3800 SUN:SunFire 4800
SUN:SunFire 4810 SUN:SunFire 6800
SUN:SunFire E2900 SUN:SunFire V1280
SUN:SunFire V210 SUN:SunFire V240
SUN:SunFire V250 - Requires Solaris 8-7/03 minimum SUN:SunFire V440
SUN:SunFire V480 SUN:SunFire V880
SUN:SunFire V880z

Cluster Management
SUN:SCS(2.2) - Refer to SUN Cluster 2.2 Quick Connect Guide
for details concerning Quorum setup.
SUN:SCS(3.1) - Refer to Sun Cluster 3.x Quick Connect guide
for support requirements
VER:VCS(2.0) VER:VCS(3.5)
VER:VCS(4.0)
Host Connectivity
HP:Sun Solaris Platform Kit for EVA(3.0D) - For latest SSSU,
Platform Kit V 3.0E is required in addition to V 3.0D
HP:Sun Solaris Platform Kit for EVA(3.0E) - For latest SSSU,
Platform Kit V 3.0E is required in addition to V 3.0D

Path Management
HP:Secure Path for Solaris(3.0D) HP:Secure Path(3.0C) SP1
Volume Management
SUN:Solstice Disk Suite(4.2.1) VER:VxVM(3.2) - Copy S45spdrv to S65spdrv in /etc/rcS.d
directory if it does not exist. Note: DMP is not supported
VER:VxVM(3.5) - Note: DMP is not supported VER:VxVM(4.0) - Note: DMP is not supported


Device/Configuration Mgmt
HP:Command View EVA(3.3) HP:OVSAM Storage Node Manager
Storage Area Management
HP:Network View HP:OVSAM Integration(3.2)
HP:OVSOM(1.2)

ILM
Disaster Recovery
HPata Protector - Refer to Supported Solution Configurations, Business Continuity link for Data Protecor Support.
Enterprise Backup Solution
Data Protection
HP:EBS
EVA Software
License Control Feature
HP:Business Copy EVA - See the Business Copy EVA streams for
details on supported browsers and JRE Note: No Cluster
Support
HP:Continuous Access EVA - See the Continuous Access EVA
streams for details on supported browsers and JRE.
Application SW See compatibility matrices below
Database
ORA:HA Oracle 9i (Not Supported) ORA:Oracle9iRAC (Not Supported)
HBA See compatibility matrices below
For direct connect, use PriNL topology
HPS-SWSA4-PC Driver:2.6.13 FW:3.0.3 - 1 Gbps 32-bit PCI HPS-SWSA4-SC Driver:2.6.13 FW:13.3.7 - 1 Gbps 64-bit
Sbus
HP:FCA2257C Driver:4.13.01 F-Code:1.18.5 FW:2.2.6 HP:FCA2257P Driver:4.13.01 F-Code:1.18.5 F-Code:2.00.05
FW:3.2.15 - 2 Gbps 64-bit/66 MHz PC
HP:FCA2257S Driver:4.13.01 F-Code:1.18.3 FW:2.2.6 - 1 Gbps
64-bit/25 MHz Sbus Dual Channel
QLGLA2310F Driver:4.13.01 FW:Loaded from driver - 2 Gbps
PCI FC Adapter
Switch FC See compatibility matrices below
Refer to SAN Design Guide document on SPOCK for supported SAN topologies and 2 Gbps switch speed
constraints.
B-Series
B-Series Notes: B-Series switches supported by StorageWorks Multi-protocol Router.
BCD:Brocade 2400 FW:2.6.2a FW:2.6.2b - Recommended
FW:2.6.2b
BCD:Brocade 2800 FW:2.6.2a FW:2.6.2b - Recommended
FW:2.6.2b
CPQ:SAN Switch 16 FW:2.6.2a FW:2.6.2b - Recommended
FW:2.6.2b
CPQ:SAN Switch 16-EL FW:2.6.2a FW:2.6.2b - Recommended
FW:2.6.2b
CPQ:SAN Switch 2/16 FW:3.1.3a FW:3.2.0 - Recommended
FW:3.2.0
CPQ:SAN Switch 2/16-EL FW:3.1.3a FW:3.2.0 - Recommended
FW:3.2.0


CPQ:SAN Switch 2/8-EL FW:3.1.3a FW:3.2.0 - Recommended
FW:3.2.0
CPQ:SAN Switch 8 FW:2.6.2a FW:2.6.2b - Recommended
FW:2.6.2b
CPQ:SAN Switch 8-EL FW:2.6.2a FW:2.6.2b - Recommended
FW:2.6.2b
CPQ:SAN Switch Integrated/32 FW:2.6.2a FW:2.6.2b -
Recommended FW:2.6.2b
CPQ:SAN Switch Integrated/64 FW:2.6.2a FW:2.6.2b -
Recommended FW:2.6.2b
HP:Core Switch 2/64 FW:4.2.2a FW:4.4.0 - Recommended
FW:4.4.0
HP:Core Switch 2/64 Power Pack FW:4.2.2a FW:4.4.0 -
Recommended FW:4.4.0
HP:FC 16B FW:3.1.3a FW:3.2.0 - Recommended FW:3.2.0
HP:FC 8B FW:3.1.3a FW:3.2.0 - Recommended FW:3.2.0 HP:FC Entry Switch 8B FW:3.1.3a FW:3.2.0 - Recommended
FW:3.2.0
HP:FC Switch 6164-32 FW:2.6.2a FW:2.6.2b - Recommended
FW:2.6.2b
HP:FC Switch 6164-64 FW:2.6.2a FW:2.6.2b - Recommended
FW:2.6.2b
HP:MSA SAN Switch 2/8 FW:3.1.2a FW:3.2.0 - Recommended
FW: 3.2.0
HP:SAN Director 2/128 FW:4.2.2a FW:4.4.0 - Recommended
FW: 4.4.0
HP:SAN Director 2/128 Power Pack FW:4.2.2a FW:4.4.0 -
Recommended FW: 4.4.0
HP:SAN Switch 2/16 FW:3.1.3a FW:3.2.0 - Recommended
FW:3.2.0
HP:SAN Switch 2/16 Power Pack FW:3.1.3a FW:3.2.0 -
Recommended FW:3.2.0
HP:SAN Switch 2/16-EL FW:3.1.3a FW:3.2.0 - Recommended
FW:3.2.0
HP:SAN Switch 2/16N FF FW:4.2.2a FW:4.4.0 - Recommended
FW: 4.4.0
HP:SAN Switch 2/16N FF GSA/TAA FW:4.2.2a FW:4.4.0 -
Recommended FW: 4.4.0
HP:SAN Switch 2/16N FF6N FF FW:4.2.2a FW:4.4.0 -
Recommended FW: 4.4.0
HP:SAN Switch 2/16N GSA/TAA Power Pack FW:4.2.2a
FW:4.4.0 - Recommended FW: 4.4.0
HP:SAN Switch 2/16N Power Pack FW:4.2.2a FW:4.4.0 -
Recommended FW: 4.4.0
HP:SAN Switch 2/16V FW:4.2.2a FW:4.4.0 - Recommended
FW: 4.4.0
HP:SAN Switch 2/16V GSA/TAA FW:4.2.2a FW:4.4.0 -
Recommended FW: 4.4.0
HP:SAN Switch 2/32 FW:4.2.2a FW:4.4.0 - Recommended
FW:4.4.0
HP:SAN Switch 2/32 Power Pack FW:4.2.2a FW:4.4.0 -
Recommended FW:4.4.0
HP:SAN Switch 2/8 Power Pack FW:3.1.3a FW:3.2.0 -
Recommended FW:3.2.0
HP:SAN Switch 2/8-EL FW:3.1.3a FW:3.2.0 - Recommended
FW:3.2.0
HP:SAN Switch 2/8V FW:4.2.2a FW:4.4.0 - Recommended FW:
4.4.0
HP:SAN Switch 2/8V GSA/TAA FW:4.2.2a FW:4.4.0 -
Recommended FW: 4.4.0
HP:SAN Switch 2/8V GSA/TAA Power Pack FW:4.2.2a FW:4.4.0
- Recommended FW: 4.4.0
HP:SAN Switch 2/8V Power Pack FW:4.2.2a FW:4.4.0 -
Recommended FW: 4.4.0
HP:SAN Switch 4/32 Base FW:4.4.0 - Recommended FW: 4.4.0
HP:SAN Switch 4/32 Full FW:4.4.0 - Recommended FW: 4.4.0 HP:SAN Switch 4/32 Power Pack FW:4.4.0 - Recommended FW:
4.4.0
C-Series
CSC:MDS 9120FirmwareSet1 FW:1.3.4a CSC:MDS 9120FirmwareSet2 FW:2.0.1b - Recommended FW:
2.0.1b

CSC:MDS 9140FirmwareSet1 FW:1.3.4a CSC:MDS 9140FirmwareSet2 FW:2.0.1b - Recommended FW:
2.0.1b
CSC:MDS 9216A - Recommended FW: 2.0.1b CSC:MDS 9216FirmwareSet1 FW:1.3.4a
CSC:MDS 9216FirmwareSet2 FW:2.0.1b - Recommended FW:
2.0.1b
CSC:MDS 9216i FW:2.0.1b - Recommended FW: 2.0.1b
CSC:MDS 9506FirmwareSet1 FW:1.3.4a CSC:MDS 9506FirmwareSet2 FW:2.0.1b - Recommended FW:
2.0.1b
CSC:MDS 9509FirmwareSet1 FW:1.3.4a CSC:MDS 9509FirmwareSet2 FW:2.0.1b - Recommended FW:
2.0.1b
M-Series
M-Series Notes: Mixing switch firmware versions in the fabric is permitted only during upgrades. Do not enable new features until the upgrade is
completed. StorageWorks HA-Fabric Manager (HAFM) is not supported with the 2/12 switch at this time.
HPirector 2/140 FW:06.01.00-18 FW:06.02.00-22 -
Recommended FW: 06.02.00-22 Note: 06.02.00-22 is required
to be compatible with 2nd-generation 2/12 and 2/24 Edge
Switches
HPirector 2/64 FW:06.01.00-18 FW:06.02.00-22 -
Recommended FW: 06.02.00-22 Note: 06.02.00-22 is required
to be compatible with 2nd-generation 2/12 and 2/24 Edge
Switches
HPirector FC-64 - Recommended FW: 06.02.00-22 Note:
06.02.00-22 is required to be compatible with 2nd-generation
2/12 and 2/24 Edge Switches
HP:Edge Switch 2/12 1st Generation FW:06.01.00-18
FW:06.02.00-22 - Recommended FW: 06.02.00-22 Note:
06.02.00-22 is required to be compatible with 2nd-generation
2/12 and 2/24 Edge Switches. StorageWorks HA-Fabric
Manager (HAFM) is not supported with the 2/12 switch at this
time.
HP:Edge Switch 2/12 2nd Generation FW:05.05.01-01 HP:Edge Switch 2/16 FW:06.01.00-18 FW:06.02.00-22 -
FW:06.02.00-22 - Recommended FW: 06.02.00-22 Note:
06.02.00-22 is required to be compatible with non 2ndgeneration
2/12 and 2/24 Edge Switches. StorageWorks HAFabric
Manager (HAFM) is not supported with the 2/12 switch
at this time.
Recommended FW: 06.02.00-22 Note: 06.02.00-22 is required
to be compatible with 2nd-generation 2/12 and 2/24 Edge
Switches
HP:Edge Switch 2/24 1st Generation FW:06.01.00-18
FW:06.02.00-22 - Recommended FW: 06.02.00-22 Note:
06.02.00-22 is required to be compatible with 2nd-generation
2/12 and 2/24 Edge Switches
HP:Edge Switch 2/24 2nd Generation FW:05.03.01-01
FW:06.02.00-22 - Recommended FW: 06.02.00-22 Note:
06.02.00-22 is required to be compatible with non 2ndgeneration
2/12 and 2/24 Edge Switches
HP:Edge Switch 2/32 FW:06.01.00-18 FW:06.02.00-22 -
Recommended FW: 06.02.00-22 Note: 06.02.00-22 is required
to be compatible with 2nd-generation 2/12 and 2/24 Edge
Switches
MCD:McDATA ED-5000 FW:04.01.00-16 FW:04.01.01-02 -
Recommended FW: 04.01-01-02.
MCD:McDATA ES-3016 FW:06.01.00-18 FW:06.02.00-22 -
Recommended FW: 06.02.00-22 Note: 06.02.00-22 is required
to be compatible with 2nd-generation 2/12 and 2/24 Edge
Switches
Switch Software See compatibility matrices below
Fabric Management
CSC:Fabric Manager(1.3.4a) - C-Series Fabric Manager 1.3.4a
is required with version 1.3.4a switch FW.
CSC:Fabric Manager(2.0.1b) - C-Series Fabric Manager 2.0.1b
is required with version 2.0.1b FW
HP:Fabric Manager (3.0.2c) HP:Fabric Manager (4.0.1) - GUI Switch management
application for B-Series switches.
HP:Fabric Manager (4.1.1) HP:Fabric Manager (4.2) - GUI Router/Switch management
application for B-Series router/switches.
HP:Fabric Manager (4.4.0) HP:HAFM(04.02.00-40)
HP:HAFM(07.01.00-09) - M-Series. Minimum version for
Notebook HAFM Server only.
HP:HAFM(07.02.00-09) - M-Series. Minimum version for 1U
HAFM Appliance only.
HP:HAFM(08.02.00) - M-Series. Recommended version for 1U
HAFM Appliance only.
SAN Extension See compatibility matrices below
Direct Connect not supported.
Multi Protocol Device
HP:MP Router FW:7.1.2c - Minimum Fabric Manager 4.2 (optional management software). See the SAN Design Reference Guide
for supported Multi-protocol Router configuration rules. See Multi-protocol Router stream document for FCIP support.
Array Controller
HP:HSV100 VCS:3.010 VCS:3.020 - Recommended FW: VCS
3.020
HP:HSV110 VCS:3.010 VCS:3.020 - Recommended FW: VCS
3.020
Disk Array
For information about future array connectivity plans, contact your regional Marketing Manager to contact the NSS Closure
Team. All HBAs and Switches are supported with both 1 Gb/sec and 2 Gb/sec Chips for XP1024/128.
HP:EVA3000 HP:EVA5000

HBA HPS-SWSA4-PC HPS-SWSA4-SC HP:FCA2257C HP:FCA2257P HP:FCA2257S
Host PriNL PubNL DFA PriNL PubNL DFA PriNL PubNL DFA PriNL PubNL DFA PriNL PubNL DFA
SUN:E10000 N N Y N N Y N N N N N Y N N Y
SUN:E220R N N Y N N N N N N N N Y N N N
SUN:E250 N N Y N N N N N N N N Y N N N
SUN:E3000 N N Y N N Y N N N N N Y N N Y
SUN:E3500 N N Y N N Y N N N N N Y N N Y
SUN:E4000 N N Y N N Y N N N N N Y N N Y
SUN:E420R N N Y N N N N N N N N Y N N N
SUN:E450 N N Y N N N N N N N N Y N N N
SUN:E4500 N N Y N N Y N N N N N Y N N Y
SUN:E5000 N N Y N N Y N N N N N Y N N Y
SUN:E5500 N N Y N N Y N N N N N Y N N Y
SUN:E6000 N N Y N N Y N N N N N Y N N Y
SUN:E6500 N N Y N N Y N N N N N Y N N Y
SUN:SunFire 12K N N Y N N N N N N N N Y N N N
SUN:SunFire 15K N N Y N N N N N N N N Y N N N
SUN:SunFire 280R N N Y N N N N N N N N Y N N N
SUN:SunFire 3800 N N N N N N N N Y N N N N N N
SUN:SunFire 4800 N N Y N N N N N Y N N Y N N N
SUN:SunFire 4810 N N Y N N N N N Y N N Y N N N
SUN:SunFire 6800 N N Y N N N N N Y N N Y N N N
SUN:SunFire E2900 N N Y N N N N N N N N Y N N N
SUN:SunFire V1280 N N Y N N N N N N N N Y N N N
SUN:SunFire V210 N N Y N N N N N N N N Y N N N
SUN:SunFire V240 N N Y N N N N N N N N Y N N N
SUN:SunFire V250 N N N N N N N N N N N Y N N N
SUN:SunFire V440 N N Y N N N N N N N N Y N N N
SUN:SunFire V480 N N Y N N N N N N N N Y N N N
SUN:SunFire V880 N N Y N N N N N N N N Y N N N
SUN:SunFire V880z N N Y N N N N N N N N Y N N N

HBA QLGLA2310F
Host PriNL PubNL DFA
SUN:E10000 N N Y
SUN:E220R N N Y
SUN:E250 N N Y
SUN:E3000 N N Y
SUN:E3500 N N Y
SUN:E4000 N N Y
SUN:E420R N N Y
SUN:E450 N N Y
SUN:E4500 N N Y
SUN:E5000 N N Y
SUN:E5500 N N Y
SUN:E6000 N N Y
SUN:E6500 N N Y
SUN:SunFire 12K N N Y
SUN:SunFire 15K N N Y
SUN:SunFire 280R N N Y
SUN:SunFire 3800 N N N
SUN:SunFire 4800 N N Y
SUN:SunFire 4810 N N Y
SUN:SunFire 6800 N N Y
SUN:SunFire E2900 N N Y
SUN:SunFire V1280 N N Y
SUN:SunFire V210 N N Y
SUN:SunFire V240 N N Y
SUN:SunFire V250 N N Y
SUN:SunFire V440 N N Y
SUN:SunFire V480 N N Y
SUN:SunFire V880 N N Y
SUN:SunFire V880z N N Y

sopato

先谢谢nntp。
请问nntp您文中列举的所需软件和patch都一定要统统打上才可以让SUN认到EVA3000吗？

列举一下这边的应用环境：
SUN F280R，SOLARIS 8 ， Qlogic 2310F HBA card

Basten

人家不是说不支持……是说没有经验……唉

lunarseaboy

vi /kernel/drv/sd.conf

vahmoiz

sun这边要使用订货号SG-开头，不要使用X开头的光纤卡，或者直接使用第三方光纤卡，打上驱动就可以了

当然eva那边要作相应的masking即可