安装mrgt问题

mjgzln

#./configure --prefix=/usr/local/mrgt-2 \
--with-gd=/usr/include \  
--with-gd-lib=/usr/lib \  
--with-gd-inc=/usr/include \  
--with-png=/usr/include \  
--with-zlib=/usr/include
........
** Ooops, one of many bad things happened:

   a)  You don't have the GD library installed.
       Get it from http://www.boutell.com, compile it and
       use either --with-gd-lib=DIR and --with-gd-inc=DIR to specify
       its location. You might also have to use --with-z-inc,
             --with-z-lib and --with-png-inc, --with-png-lib for gd
             versions 1.6 and higher.  Check config.log for more
       information on the problem.

   b)  You have the GD library installed, but not the gd.h
       header file.  Download the source (see above) and use
       --with-gd-inc=DIR to specify where the file can be found.

   c)  You have the library and the header file installed, but
       you also have a shared GD library in the same directory.
       Remove the shared library files and/or links (e.g.
       libgd.so.2.0.0, libgd.so and libgd.so.2).  This is especially
             likely if you're using a recent (post 1.8.4) version of GD
       and didn't configure it with --disable-shared.
他的系统和我安装的软件包是一样的.下面的软件包都有了.
gcc-3.2.2-5  
gd-1.8.4-11  
libpng-1.2.2-16  
perl-5.8.0-88  
zlib-1.1.4-8

已经式过重新安装，GD但没用

mjgzln

用RPM安装出现
warning: mrtg-2.9.17-13.i386.rpm: V3 DSA signature: NOKEY, key ID db42a60e
error: Failed dependencies:
        perl(CGI) is needed by mrtg-2.9.17-13
        perl(CGI::Carp) is needed by mrtg-2.9.17-13

perl我已经安装过了，但还是出现错语，不明白了，，

mjgzln

老大们解答一下

platinum

perl(CGI) is needed by mrtg-2.9.17-13
       perl(CGI::Carp) is needed by mrtg-2.9.17-13
还有perl-cgi-xxxx.rpm