- 论坛徽章:
- 0
|
console口连接，最后显示这样，不能输入，怎么解决？
LOM event: +4h26m12s host power on
Power ON
Verifying NVRAM...Done
Bootmode is 0
[New I2C DIMM address]
MCR0 = 57b2ce06
MCR1 = 80008000
MCR2 = cf3000ff
MCR3 = a00000cf
Ecache Size = 512 KB
NVRAM Test
Icache Test
Dcache Test
MMU Test
FPU Test
Ecache Tag Addr Test
Ecache RAM Addr Test
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x40000000
MEMSIZE=0x20000000
Data Line Test
Core Memory Test
Clearing memory...including Unix retained memory...Done
Turning ON MMUs Done
Copy ROM to RAM (170040 bytes) Done
Orig PC=0x1fff0007e44 New PC=0xf0f07e9c
Processor Speed=648MHz
Memory Data Line Test
Memory Addr Line w/ Ecache Test
**********************************************
PSTATE=0000000000000414 TBA=00000000f0f00000 DCU Control=000000000000000f
AFSR=ffffffffa04300b8 AFAR=fffffffffffffff8 PIL=000000000000000f
I-SFSR=0000000000ff30bb D-SFSR=000000000070008f D-SFAR=00000000f0f62640
TL=0001 TT=0030 TPC=00000000f0f0eb88 TNPC=00000000f0f0eb8c
**********************************************
[0 e9 1 9] ERROR: Fail on address line, address = 0x0, index=0x40
************************
STATUS = FAILED
MESSAGE = Memory Addr Blk Test failed
SUSPECT = DIMM0
[0 e8 1 9] ERROR: Fail on memory region = 0x0
Looking for Dropin FVM ... found
Decompressing Client Done
Transferring control to Client...
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:0 POR:1
Probing upa at 1f,0 pci pci pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb)
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom eeprom idprom SUNW,lomh
Probing /pci@1,1 Device 3 pmu i2c temperature dimm dimm i2c-nvram
idprom motherboard-fru fan-control
lomp
Probing Memory Bank #0 512 Megabytes
Probing Memory Bank #1 512 Megabytes
Probing Memory Bank #2 0 Megabytes
Probing Memory Bank #3 0 Megabytes
Probing /pci@1,1 Device 7 isa power serial serial
Probing /pci@1,1 Device c network firewire usb
Probing /pci@1,1 Device 3
Probing /pci@1,1 Device d ide disk cdrom
Probing /pci@1,1 Device 5 pci108e,1100 network firewire usb
Probing /pci@1 Device 8 scsi disk tape scsi disk tape
Probing /pci@1 Device 5 SUNW,XVR-100
Probing /pci@1 Device 6 Nothing there
Probing /pci@1 Device 7 Nothing there
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #57376668.
Ethernet address 0:3:ba:6b:7f:9c, Host ID: 836b7f9c.
Environment monitoring: disabled
Power On Self Test Failed. Cause: Memory Addr Blk Test failed
ok |
|
免费注册
发表于 2005-12-15 14:52
