请助：sco openserver5.0.7 license成功后,不能register product？

lsting

公司一台sco openserver5.0.7的服务器，用的D版的，以前用了一个注册号，注册成功，并成功register了，但过一段时间后，提示注册到期。
故自己就remove license了，重新注册了一个注册码，但是不能register product了，而且启动机子后，提示如下：
NO user licenses were found on this machine. Please boot
Single user and correct this situation .Licensed software
Will not operate until user licenses are installed.
The License Policy Manager Daemon (ifor_pmd) was unable to start.
This is usually due to a read-only root filesystem,lack of
User licenses or a damaged program image file (/etc/ifor_pmd).
If this is not the case ,please contact your SCO service provider
，我用uname -X显示user数为1，我注册的这个号是基本用户为5个的，不知道为什么？请各位高手指点，谢谢！

[ 本帖最后由 lsting 于 2006-6-6 14:27 编辑 ]

saintdragon

进BIOS看看系统时间是否正确

lsting

BIOS时间和系统时间都是一致,并且都是正确日期时间

myluoguowei

你重新安装序列号。