- 论坛徽章:
- 0
|
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--enable-dlmalloc=LIB Compile & use the malloc package by Doug Lea
--enable-gnuregex Compile GNUregex. Unless you have reason to use this
option, you should not enable it. This library file
is usually only required on Windows and very old
Unix boxes which do not have their own regex library
built in.
--enable-mempool-debug Include MemPool debug verifications
--enable-xmalloc-statistics
Show malloc statistics in status page
--disable-carp Disable CARP support
--enable-async-io=N_THREADS
Shorthand for
--with-aufs-threads=N_THREADS
--with-pthreads
--enable-storeio=ufs,aufs
--enable-storeio="list of modules"
Build support for the list of store I/O modules.
The default is only to build the "ufs" module.
See src/fs for a list of available modules, or
Programmers Guide section <not yet written>
for details on how to build your custom store module
--enable-heap-replacement
Backwards compatibility option. Please use the
new --enable-removal-policies directive instead.
--enable-removal-policies="list of policies"
Build support for the list of removal policies.
The default is only to build the "lru" module.
See src/repl for a list of available modules, or
Programmers Guide section 9.9 for details on how
to build your custom policy
--enable-icmp Enable ICMP pinging
--enable-delay-pools Enable delay pools to limit bandwidth usage
--enable-useragent-log Enable logging of User-Agent header
--enable-referer-log Enable logging of Referer header
--disable-wccp Disable Web Cache Coordination V1 Protocol
--disable-wccpv2 Disable Web Cache Coordination V2 Protocol
--enable-kill-parent-hack
Kill parent on shutdown
--enable-forward-log Enable experimental forward_log directive
--enable-multicast-miss Enable experimental multicast notification of cachemisses
--enable-snmp Enable SNMP monitoring
--enable-cachemgr-hostname=hostname
Make cachemgr.cgi default to this host
--enable-arp-acl Enable use of ARP ACL lists (ether address)
--enable-htcp Enable HTCP protocol
--enable-ssl Enable ssl gatewaying support using OpenSSL
--enable-forw-via-db Enable Forw/Via database
--enable-cache-digests Use Cache Digests
see http://www.squid-cache.org/FAQ/FAQ-16.html
--enable-default-err-language=lang
Select default language for Error pages (see
errors directory)
--enable-err-languages=\"lang1 lang2..\"
Select languages to be installed. (All will be
installed by default)
--enable-coss-aio-ops Enable COSS I/O with Posix AIO (default is aufs I/O)
--enable-select Enable select() support.
--disable-select Disable select() support.
--enable-poll Enable poll() instead of select(). Normally poll
is preferred over select, but configure knows poll
is broken on some platforms. If you think you are
smarter than the configure script, you may enable
poll with this option.
--disable-poll Disable the use of poll().
--enable-epoll Enable epoll() instead of poll() or select().
epoll() is best where available, but must be
explicitly set at the moment.
--disable-epoll Disable the use of epoll().
--enable-kqueue Enable kqueue support.
--disable-kqueue Disable kqueue support.
--disable-http-violations
This allows you to remove code which is known to
violate the HTTP protocol specification.
--enable-ipf-transparent
Enable Transparent Proxy support for systems
using IP-Filter network address redirection.
--enable-pf-transparent
Enable Transparent Proxy support for systems
using PF network address redirection.
--enable-linux-netfilter
Enable Transparent Proxy support for Linux 2.4 and later
--enable-large-cache-files
Enable support for large cache files (>2GB).
WARNING: on-disk cache format is changed by this option
--enable-linux-tproxy
Enable real Transparent Proxy support for Netfilter TPROXY.
--enable-leakfinder
Enable Leak Finding code. Enabling this alone
does nothing; you also have to modify the source
code to use the leak finding functions. Probably
Useful for hackers only.
--disable-ident-lookups
This allows you to remove code that performs
Ident (RFC 931) lookups.
--disable-internal-dns This prevents Squid from directly sending and
receiving DNS messages, and instead enables the
old external 'dnsserver' processes.
--enable-truncate This uses truncate() instead of unlink() when
removing cache files. Truncate gives a little
performance improvement, but may cause problems
when used with async I/O. Truncate uses more
filesystem inodes than unlink..
--enable-default-hostsfile=path
Select default location for hosts file.
See hosts_file directive in squid.conf for details
--enable-win32-service Compile Squid as a WIN32 Service
Works only on Windows NT and Windows 2000 Platforms.
--enable-auth="list of auth scheme modules"
Build support for the list of authentication schemes.
The default is to build support for the Basic scheme.
See src/auth for a list of available modules, or
Programmers Guide section authentication schemes
for details on how to build your custom auth scheme
module
--enable-basic-auth-helpers="list of helpers"
This option selects which basic scheme proxy_auth
helpers to build and install as part of the normal
build process. For a list of available
helpers see the helpers/basic_auth directory.
--enable-ntlm-auth-helpers="list of helpers"
This option selects which proxy_auth ntlm helpers
to build and install as part of the normal build
process. For a list of available helpers see
the helpers/ntlm_auth directory.
--enable-digest-auth-helpers="list of helpers"
This option selects which digest scheme proxy_auth
helpers to build and install as part of the normal
build process. For a list of available helpers see the
helpers/digest_auth directory.
--enable-negotiate-auth-helpers="list of helpers"
This option selects which negotiate scheme authentication
helpers to build and install as part of the normal build
process. For a list of available helpers see the
helpers/negotiate_auth directory.
--enable-ntlm-fail-open Enable NTLM fail open, where a helper that fails one of the
Authentication steps can allow squid to still authenticate
the user.
--enable-external-acl-helpers="list of helpers"
This option selects which external_acl helpers to
build and install as part of the normal build
process. For a list of available helpers see the
helpers/external_acl directory.
--disable-unlinkd Do not use unlinkd
--enable-stacktraces Enable automatic call backtrace on fatal errors
--enable-x-accelerator-vary
Enable support for the X-Accelerator-Vary
HTTP header. Can be used to indicate
variance within an accelerator setup.
Typically used together with other code
that adds custom HTTP headers to the requests.
--enable-follow-x-forwarded-for
Enable support for following the X-Forwarded-For
HTTP header to try to find the IP address of the
original or indirect client when a request has
been forwarded through other proxies.
默认到底是怎么指定的?是全部禁止？允许，还是某些禁止和允许？ |
|
免费注册
发表于 2006-10-17 21:07