求救： AIX下如何看MII的情况阿？

wheel

AIX下如何看MII的情况阿？linux下有
$ mii-tool
eth0: negotiated 100baseTx-FD, link ok
$ ethtool  eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 32
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: pumbg
        Wake-on: d
        Current message level: 0x00000007 (7)
        Link detected: yes
那在AIX相似的命令是啥阿？
还有$ arping  192.168.3.1
WARNING: interface is ignored: Operation not permitted
ARPING 192.168.3.1 from 192.168.3.2 eth0
Unicast reply from 192.168.3.1 [00:0A:EB:20:22:12]  0.691ms
Unicast reply from 192.168.3.1 [00:0A:EB:20:22:12]  0.679ms
Sent 2 probes (1 broadcast(s))
Received 2 response(s)
在AIX相似的命令是啥阿？

wheel

难道AIX下没有这功能？

feiaix

不知道MII是什么，落伍了啊。