- 论坛徽章:
- 0
|
昨天没注意敲错了，是/dev/da0s1，内核编译过，下面是插上优盘后的信息。
merced#dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #1: Thu Feb 1 13:08:23 UTC 2007
root@merced:/usr/src/sys/i386/compile/KERNEL
ACPI APIC Table: <GBT AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1716.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536805376 (511 MB)
avail memory = 520085504 (495 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT AWRDACPI> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x40bf on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <multimedia, audio> at device 2.0 (no driver attached)
pci2: <input device> at device 2.1 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0x9800-0x981f irq 16 at device 3.0 on pci2
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9c00-0x9c1f irq 18 at device 3.1 on pci2
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe3001000-0xe30010ff irq 21 at device 3.2 on pci2
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xe3000000-0xe30000ff irq 18 at device 4.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:a0:40:00:04:e0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb000-0xb01f irq 19 at device 31.2 on pci0
uhci2: [GIANT-LOCKED]
usb3: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci3: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb800-0xb81f irq 23 at device 31.4 on pci0
uhci3: [GIANT-LOCKED]
usb4: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> at device 31.5 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1716914856 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <WDC WD800PB-00EPA0 77.07W77> at ata0-master UDMA100
ad1: 152627MB <WDC WD1600JB-00REA0 20.00K20> at ata0-slave UDMA100
acd0: DVDR <PIONEER DVD-RW DVR-111/1.23> at ata1-slave UDMA66
Trying to mount root from ufs:/dev/ad0s2a
umass0: Netac USB Flash Disk, rev 2.00/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Netac OnlyDisk 1.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 500MB (1024000 512 byte sectors: 64H 32S/T 500C)
merced# mount -t msdos /dev/da0s1 /mnt
mount_msdosfs: /dev/da0s1: No such file or directory |
|
免费注册
发表于 2007-02-02 08:56
