免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12下一页
最近访问板块 发新帖
查看: 2475 | 回复: 10
打印 上一主题 下一主题

请问老手们 编绎内核问题 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2007-04-15 17:30 |只看该作者 |倒序浏览
下面是手册上复制的

联编内核

   1.

      进入 /usr/src 目录:

      # cd /usr/src

   2.

      编译内核:

      # make buildkernel KERNCONF=MYKERNEL

   3.

      安装新内核:

      # make installkernel KERNCONF=MYKERNEL

    注意: 使用这种方法联编内核时, 需要安装完整的 FreeBSD 源代码。

    提示: 默认情况下, 在联编您所定制的内核时, 全部 内核模块也会同时参与构建。



请问用这种方式编绎内核不能自己修改配置文件吗 /usr/src/sys/i386/conf/PF
我把部份功能加上# 号  但是好像这个功能还能用

这是怎么会事。。。。。

[ 本帖最后由 chenyangbo 于 2007-4-15 17:48 编辑 ]

论坛徽章:
2
丑牛
日期:2013-09-29 09:47:222015七夕节徽章
日期:2015-08-21 11:06:17
2 [报告]
发表于 2007-04-15 17:36 |只看该作者
请问用这种方式编绎内核不能自己修改配置文件吗 /usr/src/sys/i386/conf/PF
我把部份功能加上# 号  但是好像这个功能还能用


什么意思?

论坛徽章:
0
3 [报告]
发表于 2007-04-15 17:39 |只看该作者
就是我的   把一些SCSI    一些没有的 网卡  加上#号
但是编绎内核后
这个功能好像好在
所以问  上面的这种编绎方式是不是不能自己定制内核

论坛徽章:
2
丑牛
日期:2013-09-29 09:47:222015七夕节徽章
日期:2015-08-21 11:06:17
4 [报告]
发表于 2007-04-15 18:00 |只看该作者
原帖由 chenyangbo 于 2007-4-15 17:39 发表
就是我的   把一些SCSI    一些没有的 网卡  加上#号
但是编绎内核后
这个功能好像好在
所以问  上面的这种编绎方式是不是不能自己定制内核

什么叫这些功能还在啊,你把你的网卡型号加上#号试试,看你的机器还能联网不。
这个方法绝对没问题的

论坛徽章:
0
5 [报告]
发表于 2007-04-15 18:09 |只看该作者
也是
不过我把 IPV6 加上#了
pf# sockstat -6 |grep httpd
www      httpd      44634 3  tcp46  *:80                  *:*
www      httpd      44600 3  tcp46  *:80                  *:*
www      httpd      44599 3  tcp46  *:80                  *:*
www      httpd      44598 3  tcp46  *:80                  *:*
www      httpd      44595 3  tcp46  *:80                  *:*
www      httpd      44594 3  tcp46  *:80                  *:*
www      httpd      44560 3  tcp46  *:80                  *:*
www      httpd      44558 3  tcp46  *:80                  *:*
www      httpd      44554 3  tcp46  *:80                  *:*
www      httpd      44516 3  tcp46  *:80                  *:*
root     httpd      44513 3  tcp46  *:80                  *:*
pf#
为什么还会有ipv6的显示呢

论坛徽章:
2
丑牛
日期:2013-09-29 09:47:222015七夕节徽章
日期:2015-08-21 11:06:17
6 [报告]
发表于 2007-04-15 18:37 |只看该作者
原帖由 chenyangbo 于 2007-4-15 18:09 发表
也是
不过我把 IPV6 加上#了
pf# sockstat -6 |grep httpd
www      httpd      44634 3  tcp46  *:80                  *:*
www      httpd      44600 3  tcp46  *:80                  *:*
www      htt ...

你重启了应用新内核了吗?

论坛徽章:
2
丑牛
日期:2013-09-29 09:47:222015七夕节徽章
日期:2015-08-21 11:06:17
7 [报告]
发表于 2007-04-15 18:37 |只看该作者
option INET6
是注释的这个吗?

论坛徽章:
0
8 [报告]
发表于 2007-04-15 18:58 |只看该作者
恩 都加上#了
pf# uname -a
FreeBSD pf.giggs.org 6.2-RELEASE-p3 FreeBSD 6.2-RELEASE-p3 #0: Sun Apr 15 18:13:12 CST 2007     root@pf.giggs.org:/usr/obj/usr/src/sys/GENERIC  i386
pf# sockstat -6 |grep httpd
www      httpd      718   3  tcp46  *:80                  *:*
www      httpd      717   3  tcp46  *:80                  *:*
www      httpd      716   3  tcp46  *:80                  *:*
www      httpd      715   3  tcp46  *:80                  *:*
www      httpd      714   3  tcp46  *:80                  *:*
root     httpd      655   3  tcp46  *:80                  *:*
pf#


pf# cd /usr/src/sys/i386/conf/
pf# ls
.cvsignore      GENERIC         Makefile        PAE             SMP
DEFAULTS        GENERIC.hints   NOTES           PF              XBOX
pf#



pf# cat PF
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US ... lconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.13 2006/10/09 18:41:36 simon Exp $

device          pf
device          pflog
device          pfsync
options         ALTQ
options         ALTQ_CBQ
options         ALTQ_RED
options         ALTQ_RIO
options         ALTQ_HFSC
options         ALTQ_PRIQ

machine         i386
#cpu            I486_CPU
#cpu            I586_CPU
cpu             I686_CPU
ident           PF

# To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         # Default places to look for devices.

#makeoptions    DEBUG=-g                # Build kernel with gdb(1) debug symbols

options         SCHED_4BSD              # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
#options        INET6                   # IPv6 communications protocols
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big directories
options         MD_ROOT                 # MD is a potential root device
#options        NFSCLIENT               # Network Filesystem Client
#options        NFSSERVER               # Network Filesystem Server
#options        NFS_ROOT                # NFS usable as /, requires NFSCLIENT
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_GPT                # GUID Partition Tables.
options         COMPAT_43               # Compatible with BSD 4.3 [KEEP THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.

device          apic                    # I/O APIC

# Bus support.
#device         eisa
device          pci

# Floppy drives
#device         fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
#device         atapifd         # ATAPI floppy drives
#device         atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# SCSI Controllers
#device         ahb             # EISA AHA1742 family
#device         ahc             # AHA2940 and onboard AIC7xxx devices
#options        AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
#device         ahd             # AHA39320/29320 and onboard AIC79xx devices
#options        AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
#device         amd             # AMD 53C974 (Tekram DC-390(T))
#device         isp             # Qlogic family
#device         ispfw           # Firmware for QLogic HBAs- normally a module
#device         mpt             # LSI-Logic MPT-Fusion
#device         ncr             # NCR/Symbios Logic
#device         sym             # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device         trm             # Tekram DC395U/UW/F DC315U adapters

#device         adv             # Advansys SCSI adapters
#device         adw             # Advansys wide SCSI adapters
#device         aha             # Adaptec 154x SCSI adapters
#device         aic             # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device         bt              # Buslogic/Mylex MultiMaster SCSI adapters

#device         ncv             # NCR 53C500
#device         nsp             # Workbit Ninja SCSI-3
#device         stg             # TMC 18C30/18C50

# SCSI peripherals
#device         scbus           # SCSI bus (required for SCSI)
#device         ch              # SCSI media changers
#device         da              # Direct Access (disks)
#device         sa              # Sequential Access (tape etc)
#device         cd              # CD
#device         pass            # Passthrough device (direct SCSI access)
#device         ses             # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device         amr             # AMI MegaRAID
#device         arcmsr          # Areca SATA II RAID
#device         asr             # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device         ciss            # Compaq Smart RAID 5*
#device         dpt             # DPT Smartcache III, IV - See NOTES for options
#device         hptmv           # Highpoint RocketRAID 182x
#device         rr232x          # Highpoint RocketRAID 232x
#device         iir             # Intel Integrated RAID
#device         ips             # IBM (Adaptec) ServeRAID
#device         mly             # Mylex AcceleRAID/eXtremeRAID
#device         twa             # 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device         aac             # Adaptec FSA RAID
#device         aacp            # SCSI passthrough for aac (requires CAM)
#device         ida             # Compaq Smart RAID
#device         mfi             # LSI MegaRAID SAS
#device         mlx             # Mylex DAC960 family
#device         pst             # Promise Supertrak SX6000
#device         twe             # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          kbdmux          # keyboard multiplexer

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
#device         sc

# Enable this for the pcvt (VT220 compatible) console driver
#device         vt
#options        XSERVER         # support for X server on a vt console
#options        FAT_CURSOR      # start with block cursor

device          agp             # support several AGP chipsets

# Power management support (see NOTES for more options)
#device         apm
# Add suspend/resume support for the i8254.
device          pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device         cbb             # cardbus (yenta) bridge
#device         pccard          # PC Card (16-bit) bus
#device         cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
#device         sio             # 8250, 16[45]50 based serial ports

# Parallel port
#device         ppc
device          ppbus           # Parallel port bus (required)
#device         lpt             # Printer
#device         plip            # TCP/IP over parallel
#device         ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
#device         de              # DEC/Intel DC21x4x (``Tulip'')
#device         em              # Intel PRO/1000 adapter Gigabit Ethernet Card
#device         ixgb            # Intel PRO/10GbE Ethernet Card
#device         txp             # 3Com 3cR990 (``Typhoon'')
#device         vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
#device         bce             # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device         bfe             # Broadcom BCM440x 10/100 Ethernet
#device         bge             # Broadcom BCM570xx Gigabit Ethernet
#device         dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557, 8255
#device         lge             # Level 1 LXT1001 gigabit Ethernet
#device         nge             # NatSemi DP83820 gigabit Ethernet
#device         nve             # nVidia nForce MCP on-board Ethernet Networking
#device         pcn             # AMD Am79C97x PCI 10/100(precedence over 'lnc')
device          re              # RealTek 8139C+/8169/8169S/8110S
device          rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 7016
#device         sk              # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         stge            # Sundance/Tamarack TC9021 gigabit Ethernet
#device         ti              # Alteon Networks Tigon I/II gigabit Ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vge             # VIA VT612x gigabit Ethernet
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
device          cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device         ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device         ex              # Intel EtherExpress Pro/10 and Pro/10+
#device         ep              # Etherlink III based cards
#device         fe              # Fujitsu MB8696x based cards
#device         ie              # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device         lnc             # NE2100, NE32-VL Lance Ethernet cards
#device         sn              # SMC's 9000 series of Ethernet chips
#device         xe              # Xircom pccard Ethernet

# Wireless NIC cards
#device         wlan            # 802.11 support
#device         wlan_wep        # 802.11 WEP support
#device         wlan_ccmp       # 802.11 CCMP support
#device         wlan_tkip       # 802.11 TKIP support
#device         an              # Aironet 4500/4800 802.11 wireless NICs.
#device         ath             # Atheros pci/cardbus NIC's
#device         ath_hal         # Atheros HAL (Hardware Access Layer)
#device         ath_rate_sample # SampleRate tx rate control for ath
#device         awi             # BayStack 660 and others
#device         ral             # Ralink Technology RT2500 wireless NICs.
#device         wi              # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device         wl              # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device          loop            # Network loopback
device          random          # Entropy device
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          ehci            # EHCI PCI->USB interface (USB 2.0)
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          ural            # Ralink Technology RT2500USB wireless NICs
device          urio            # Diamond Rio 500 MP3 player
device          uscanner        # Scanners
# USB Ethernet, requires miibus
#device         aue             # ADMtek USB Ethernet
#device         axe             # ASIX Electronics USB Ethernet
#device         cdce            # Generic USB over Ethernet
#device         cue             # CATC USB Ethernet
#device         kue             # Kawasaki LSI USB Ethernet
#device         rue             # RealTek RTL8150 USB Ethernet

# FireWire support
#device         firewire        # FireWire bus code
#device         sbp             # SCSI over FireWire (Requires scbus and da)
#device         fwe             # Ethernet over FireWire (non-standard!)
pf#




      # cd /usr/src

     # make buildkernel KERNCONF=PF

     # make installkernel KERNCONF=PF
我是这样安装的    但是为什么我安装好的内核是 /usr/obj/usr/src/sys/GENERIC  ,而不是/usr/obj/usr/src/sys/PF
pf# uname -a
FreeBSD pf.giggs.org 6.2-RELEASE-p3 FreeBSD 6.2-RELEASE-p3 #0: Sun Apr 15 18:13:12 CST 2007     root@pf.giggs.org:/usr/obj/usr/src/sys/GENERIC  i386

pf也没有编绎到内核里面  ,我的pf还没有配置呢
pf# pfctl -ss
No ALTQ support in kernel
ALTQ related functions disabled
pf#


是不是  这种编绎内核的方法不定制内核呢  还是我那里做错了

[ 本帖最后由 chenyangbo 于 2007-4-15 19:00 编辑 ]

论坛徽章:
1
技术图书徽章
日期:2013-12-05 23:25:45
9 [报告]
发表于 2007-04-15 19:44 |只看该作者
你make instalkernel最后的提示信息是什么?
贴上来。


No ALTQ support in kernel,这个提示清楚,找金山词霸对着看。

论坛徽章:
0
10 [报告]
发表于 2007-04-15 21:02 |只看该作者
make installkernel
提示不记得了


不过没有出现任何错误提示

然后我就reboot了
No ALTQ support in kernel 这个我知道  就是不明白我已经把ALTQ加入内核了 为什么编绎出来还是没有ALTQ   连pf也没有编绎进去内核

难道用这种方式编绎内核   真的不能定制内核?
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP