Chinaunix

标题: pptp拨号老报错"LCP: timeout sending Config-Requests" [打印本页]

作者: LightStay    时间: 2007-12-05 14:34
标题: pptp拨号老报错"LCP: timeout sending Config-Requests"
拨号总是显示:
LCP: timeout sending Config-Requests
Connection terminated.
Modem hangup

查看日志,显示:

pppd 2.4.4 started by root, uid 0
pptp: Using interface ppp0
pptp: Connect: ppp0 <--> /dev/pts/7
pptp: anon log[mainptp.c:276]: The synchronous pptp option is NOT activated
pptp: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request'
pptp: anon log[ctrlp_dispptp_ctrl.c:738]: Received Start Control Connection Reply
pptp: anon log[ctrlp_dispptp_ctrl.c:772]: Client connection established.
pptp: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request'
pptp: anon log[ctrlp_dispptp_ctrl.c:857]: Received Outgoing Call Reply.
pptp: anon log[ctrlp_dispptp_ctrl.c:896]: Outgoing call established (call ID 0, peer's call ID 17379).
pptp: anon log[logechoptp_ctrl.c:676]: Echo Request received.
pptp: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply'
pptp: anon log[logechoptp_ctrl.c:676]: Echo Request received.
pptp: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply'
pptp: LCP: timeout sending Config-Requests
pptp: Connection terminated.
pptp: Modem hangup

好像总是到“Echo-Reply”时候报错。

请问怎么解决阿,我已经弄了2天了,还是没好。
作者: Ronaldo9_8    时间: 2007-12-05 23:49
标题: 回复 #2 LightStay 的帖子
贴出你的/etc/ppp/option.pptp
以及 /etc/ppp/peers 下相应的配置文件
作者: jiangdaoyou    时间: 2007-12-06 08:45
这种情况大部分是因为用户上网网关路由不支持PPTP穿透造成的。更换路由试一下。




欢迎光临 Chinaunix (http://bbs.chinaunix.net/) Powered by Discuz! X3.2