Chinaunix

标题: Qlogic 启动信息中报 "Bad eraseblock "是否属于正常 [打印本页]

作者: 了无牵挂 时间: 2009-06-15 14:31
标题: Qlogic 启动信息中报 "Bad eraseblock "是否属于正常
Creating 1 MTD partitions on "Amazon Boot Flash":
0x00000000-0x00100000 : "BootFlash"
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Unknown NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 534 at 0x042c0000
Bad eraseblock 1927 at 0x0f0e0000
2 cmdlinepart partitions found on MTD device NAND
Creating 2 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x00000000-0x0a000000 : "image"
0x0a000000-0x10000000 : "config"

Qlogic SANBox 5600 出现过几次意外运行Down机。不是与上面启动信息的信息有关。

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)