IBM AS/400 Client Access Express for Windows
Version 5 Release 1 Level 0
(C) Copyright IBM Corporation and Others 1984, 2000. All rights reserved.
U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corp.
Licensed Materials - Property of IBM
To cancel the CWBPING request, press CTRL-C or CTRL-BREAK
I - Verifying connection to system 10.9.8.3...
I - Successfully connected to server application: Central Client
I - Successfully connected to server application: Network File
I - Successfully connected to server application: Network Print
I - Successfully connected to server application: Data Access
I - Successfully connected to server application: Data Queues
I - Successfully connected to server application: Remote Command
I - Successfully connected to server application: Security
I - Successfully connected to server application: Telnet
E - CWBCO1003 - Winsock error, function connect() returned 10061
E - CWBCO1049 - The AS/400 server application (Management Central) is not started
E - CWBCO1008 - Unable to connect to server application Management Central, returned 10061
W - CWBCO1015 - Connection verified to system 10.9.8.3, but there were warnings
Cause
The Service Mapper was successfully contacted on the server, but connecting to the specified application server on that server failed, probably because the host server is not running. The error code is specified.
Recovery
Verify that the host server is ready to receive connections by doing the following on the server:
Enter the NETSTAT command.
Select option 3, Work with TCP/IP connection status.
Search for an entry for which the Local Port is the name of the server application specified in the message. This name may be truncated for display in NETSTAT.
Press F14 (Display port numbers) and note what port number that server is using; also note what the state of the server is.作者: yokel 时间: 2003-10-13 14:33 标题: Telnet 到 AS/400 遇到的问题 If you are having trouble starting the host socket servers, try the following:
Type STRHOSTSVR SERVER(*ALL) at the AS/400 command prompt.
If step 1 does not work, type ENDHOSTSVR SERVER(*ALL) to end the host socket servers, then try step 1 again.
If step 2 does not work, type NETSTAT at the AS/400 command prompt. Then select option 3. Work with TCP/IP connection status. Look for any jobs with TCP addresses beside them. End those jobs with option 4, then try step 1 again.作者: xuguopeng 时间: 2003-10-13 14:54 标题: Telnet 到 AS/400 遇到的问题 说到底还是服务没起来呀,我也有过服务都起来了,但是还是连不上的情况,结果是重起了一下就好了.作者: kiscore 时间: 2013-01-21 11:38
我有跟楼上一样的问题,返回的错误也一模一样,版主给解答下吧,非常感谢啦!!
cwbping 返回10061错误。