Chinaunix

标题: sun n1280的panic 请高手分析下是什么问题 [打印本页]

作者: adambbs 时间: 2010-03-27 11:45
标题: sun n1280的panic 请高手分析下是什么问题
Netra 1280\r\nOpenFirmware version 5.20.7 (08/03/07 06:11)\r\nCopyright 2007 Sun Microsystems, Inc. All rights reserved.\r\nUse is subject to license terms.\r\nSmartFirmware, Copyright (C) 1996-2001. All rights reserved.\r\n16384 MB memory installed, Serial #76516714.\r\nEthernet address 0:14:4f:8f:8d:6a, Host ID: 848f8d6a.\r\n\r\n\r\n\r\nSunOS Release 5.10 Version Generic_138888-01 64-bit\r\nCopyright 1983-2008 Sun Microsystems, Inc. All rights reserved.\r\nUse is subject to license terms.\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n SCSI bus DT DATA IN phase parity error\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Target 0 reducing sync. transfer rate\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Connected command timeout for Target 0.0\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Target 0 disabled wide SCSI mode\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Target 0 reverting to async. mode\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=timeout)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: Error reading ufs log\r\nWARNING: ufs log for / changed state to Error\r\nWARNING: Please umount(1M) / and run fsck(1M)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\n\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n Resetting scsi bus, got incorrect phase from (0,0)\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):\r\n got SCSI bus reset\r\nWARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):\r\n auto request sense failed (reason=reset)\r\nboot /ssm@0,0/pci@18,600000/scsi@2/disk@0,0:f\r\nCannot mount root on /ssm@0,0/pci@18,600000/scsi@2/disk@0,0:a fstype ufs\r\n\r\npanic[cpu0]/thread=180e000: vfs_mountroot: cannot mount root\r\n\r\n000000000180b950 genunix:vfs_mountroot+358 (800, 200, 0, 18e7c00, 1911800, 193c400)\r\n %l0-3: 00000000010bc400 00000000010bc310 00000000018ed9b8 00000000011e9000\r\n %l4-7: 00000000011e9000 000000000193e800 0000000000000600 0000000000000200\r\n000000000180ba10 genunix:main+a0 (1835c58, 180c000, 1887c40, 1939000, 183c058, 1835800)\r\n %l0-3: 0000000001015400 0000000000000001 0000000070002000 0000000000000000\r\n %l4-7: 0000000001890400 0000000000000000 000000000180c000 0000000000000000\r\n\r\nskipping system dump - no dump device configured\r\nrebooting...

作者: wd302 时间: 2010-03-27 13:14
这还分析什么，vxvm文件系统已经坏了，拆了再启动吧

作者: doging 时间: 2010-03-29 11:44
mount root分区失败，所以panic，检查硬盘吧

作者: nimysun 时间: 2010-03-29 13:23
应该是硬件问题，首先更换硬盘吧

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)