The following packages are available:
1 LGTOclnt NetWorker for Solaris (Backup/Recover) Client
(sparc) 6.1.1.Build.238
2 LGTOdrvr NetWorker for Solaris (Backup/Recover) Device Drivers
(sparc) 6.1.1.Build.238
3 LGTOlicm NetWorker for Solaris (Backup/Recover) Licensing Manager
(sparc) 6.1.1.Build.238
4 LGTOman NetWorker for Solaris (Backup/Recover) Man
(sparc) 6.1.1.Build.238
5 LGTOnode NetWorker for Solaris (Backup/Recover) Storage Node
(sparc) 6.1.1.Build.238
6 LGTOserv NetWorker for Solaris (Backup/Recover) Server
(sparc) 6.1.1.Build.238
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
Processing package instance <LGTOclnt> from </cdrom/networker_vol_1/solaris>
NetWorker for Solaris (Backup/Recover) Client
(sparc) 6.1.1.Build.238
Legato Systems, Inc.
NetWorker(TM) - Release 6.1.1.Build.238
Copyright (c) 1990-2001, Legato Systems, Inc. All rights reserved.
This product includes software developed by the University of
California, Berkeley and its contributors.
To set up a NetWorker storage node, licensing manager or client, you
need to supply a directory for the nsrexecd state file.
Below is a list of some of the filesystems, with their free space, which you
might consider:
/home :14200365
/oracle : 8176003
/ : 6509292
Directory to use for client, licensing and server information [/home/nsr]?
The nsrexecd program restricts access to a select set of NetWorker
servers. Please enter the names of each computer running a NetWorker
server that will back up this computer, one name at a time. If a
computer has more than one network interface, please enter each
interface's name (one at a time).
Enter the first NetWorker server's name [no more]:
Allowing access to all NetWorker servers.
Start NetWorker daemons at end of install [yes]? no
Using </usr> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <LGTOclnt> [y,n,?] y
Installing NetWorker for Solaris (Backup/Recover) Client as <LGTOclnt>
Processing package instance <LGTOdrvr> from </cdrom/networker_vol_1/solaris>
NetWorker for Solaris (Backup/Recover) Device Drivers
(sparc) 6.1.1.Build.238
Copyright (c) 1990-2001, Legato Systems, Inc.
All Rights Reserved.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <LGTOdrvr> [y,n,?] y
Installing NetWorker for Solaris (Backup/Recover) Device Drivers as <LGTOdrvr>
Processing package instance <LGTOlicm> from </cdrom/networker_vol_1/solaris>
NetWorker for Solaris (Backup/Recover) Licensing Manager
(sparc) 6.1.1.Build.238
Legato Systems, Inc.
NetWorker(TM) - Release 6.1.1.Build.238
Copyright (c) 1990-2001, Legato Systems, Inc. All rights reserved.
This product includes software developed by the University of
California, Berkeley and its contributors.
To set up a NetWorker storage node, licensing manager or client, you
need to supply a directory for the nsrexecd state file.
Directory /nsr exists, it will be used as the default.
Below is a list of some of the filesystems, with their free space, which you
might consider:
/home :14200274
/oracle : 8176003
/ : 6457297
Directory to use for client, licensing and server information [/nsr]?
Start NetWorker daemons at end of install [yes]? no
Using </usr> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <LGTOlicm> [y,n,?] y作者: 风之幻想 时间: 2007-02-06 15:11
Installing NetWorker for Solaris (Backup/Recover) Licensing Manager as <LGTOlicm>
## Installing part 1 of 1.
/nsr/lic/res/lictype.res
/usr/nsr/lic/res/lictype.res
/usr/sbin/lgtolic
/usr/sbin/lgtolmd
[ verifying class <none> ]
## Executing postinstall script.
nsr-izing system files
/etc/rpc already nsr-ized
Completing Installation
NetWorker successfully installed on `hostname'!
Installation of <LGTOlicm> was successful.
Processing package instance <LGTOman> from </cdrom/networker_vol_1/solaris>
NetWorker for Solaris (Backup/Recover) Man
(sparc) 6.1.1.Build.238
Legato Systems, Inc.
Using </usr> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <LGTOman> [y,n,?] y
Installing NetWorker for Solaris (Backup/Recover) Man as <LGTOman>
Processing package instance <LGTOnode> from </cdrom/networker_vol_1/solaris>
NetWorker for Solaris (Backup/Recover) Storage Node
(sparc) 6.1.1.Build.238
Legato Systems, Inc.
NetWorker(TM) - Release 6.1.1.Build.238
Copyright (c) 1990-2001, Legato Systems, Inc. All rights reserved.
This product includes software developed by the University of
California, Berkeley and its contributors.
Start NetWorker daemons at end of install [yes]? no
Using </usr> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <LGTOnode> [y,n,?] y
Installing NetWorker for Solaris (Backup/Recover) Storage Node as <LGTOnode>
## Installing part 1 of 1.
/usr/sbin/dasadmin
/usr/sbin/jb_config
/usr/sbin/jbconfig
/usr/sbin/jbexercise
/usr/sbin/jbverify
/usr/sbin/mini_el
/usr/sbin/nsrcnct
/usr/sbin/nsrjb
/usr/sbin/nsrmmd
/usr/sbin/scanner
/usr/sbin/ssi
/usr/sbin/stk_eject
/usr/sbin/tapeexercise
[ verifying class <none> ]
## Executing postinstall script.
Completing Installation
NetWorker successfully installed on `hostname'!
Installation of <LGTOnode> was successful.
Processing package instance <LGTOserv> from </cdrom/networker_vol_1/solaris>
NetWorker for Solaris (Backup/Recover) Server
(sparc) 6.1.1.Build.238
Legato Systems, Inc.
NetWorker(TM) - Release 6.1.1.Build.238
Copyright (c) 1990-2001, Legato Systems, Inc. All rights reserved.
This product includes software developed by the University of
California, Berkeley and its contributors.
Start NetWorker daemons at end of install [yes]? Using </usr> as the package base directory.
## Processing package information.
## Processing system information.
1 package pathname is already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <LGTOserv> [y,n,?] y
Installing NetWorker for Solaris (Backup/Recover) Server as <LGTOserv>
The following packages are available:
1 LGTOclnt NetWorker for Solaris (Backup/Recover) Client
(sparc) 6.1.1.Build.238
2 LGTOdrvr NetWorker for Solaris (Backup/Recover) Device Drivers
(sparc) 6.1.1.Build.238
3 LGTOlicm NetWorker for Solaris (Backup/Recover) Licensing Manager
(sparc) 6.1.1.Build.238
4 LGTOman NetWorker for Solaris (Backup/Recover) Man
(sparc) 6.1.1.Build.238
5 LGTOnode NetWorker for Solaris (Backup/Recover) Storage Node
(sparc) 6.1.1.Build.238
6 LGTOserv NetWorker for Solaris (Backup/Recover) Server
(sparc) 6.1.1.Build.238
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: q
What kind of Jukebox are you installing? [1] 2
These are the SCSI Jukeboxes currently attached to your system:
1) scsidev@3.0.1: Standard SCSI Jukebox, Vendor <ADIC>, Product <Scalar 1000>
Which one do you want to install? 1
Installing an 'Standard SCSI Jukebox' jukebox.
Name you would like to assign to the jukebox device? ADIC
A brief description of the jukebox device? [scsidev@3.0.1: Standard SCSI Jukebox]
Pathname of the control port for the jukebox device? [scsidev@3.0.1]
Do you want automated device cleaning support enabled? (yes/no) yes
Will media drive 1 be shared by multiple device paths? (yes/no) no
Enter hostname that owns media drive 1: ? [hostname]
An example of a valid device name for this OS is '/dev/rmt/1cbn'
Enter pathname of media drive 1: ? /dev/rmt/0cbn
using '/dev/rmt/0cbn' as device name
Should the drive be configured as a NDMP device? (yes/no) no
This media device has not been configured yet. Please
select a media device type for /dev/rmt/0cbn.
1) 3480 23) dst
2) 3570 24) dst (NT)
3) 3590 25) dtf
4) 4890 26) file
5) 4mm 27) himt
6) 4mm 12GB 28) logical
7) 4mm 20GB 29) LTO Ultrium
8) 4mm 4GB 30) optical
9) 4mm 8GB 31) qic
10) 8mm 32) SD3
11) 8mm 20GB 33) sdlt
12) 8mm 5GB 34) SLR
13) 8mm AIT 35) tkz90
14) 8mm AIT-2 36) tz85
15) 8mm Mammoth-2 37) tz86
16) 9490 38) tz87
17) 9840 39) tz88
18) 9940 40) tz89
19) dlt 41) tzs20
20) dlt1 42) vhs
21) dlt7000 43) VXA
22) dlt8000
Choice? 29
Will media drive 2 be shared by multiple device paths? (yes/no) no
Enter hostname that owns media drive 2: ? [hostname]
Enter pathname of media drive 2: ? /dev/rmt/1cbn
using '/dev/rmt/1cbn' as device name
Should the drive be configured as a NDMP device? (yes/no) no
This media device has not been configured yet. Please
select a media device type for /dev/rmt/1cbn.
1) 3480 23) dst
2) 3570 24) dst (NT)
3) 3590 25) dtf
4) 4890 26) file
5) 4mm 27) himt
6) 4mm 12GB 28) logical
7) 4mm 20GB 29) LTO Ultrium
8) 4mm 4GB 30) optical
9) 4mm 8GB 31) qic
10) 8mm 32) SD3
11) 8mm 20GB 33) sdlt
12) 8mm 5GB 34) SLR
13) 8mm AIT 35) tkz90
14) 8mm AIT-2 36) tz85
15) 8mm Mammoth-2 37) tz86
16) 9490 38) tz87
17) 9840 39) tz88
18) 9940 40) tz89
19) dlt 41) tzs20
20) dlt1 42) vhs
21) dlt7000 43) VXA
22) dlt8000
Choice? 29
Your jukebox has a bar code reader.
Do you want bar code reader support enabled? (yes/no) yes
Do you want volume labels to match bar code labels? (yes/no) yes
Following are attributes that define cleaning cartridge support
for the jukebox `ADIC':
auto clean: Yes
default cleanings: 5
cleaning slots: 188
Cleaning cartridge volumes Slot number
-------------------------- -----------
188
Make sure that the slots set aside for cleaning cartridges
contain cleaning cartridges. Networker must know the number
of times it can use each cleaning cartridge. You can
control how many times Networker will use each cleaning
cartridge by using the command -
nsrjb -U (number of uses) -S (slot number)
For more details please refer to nsrjb man pages.
Following are attributes that define the cleaning
schedule for each device in the jukebox.
name: /dev/rmt/0cbn
date last cleaned:
cleaning interval: 2 weeks
cleaning required: No
name: /dev/rmt/1cbn
date last cleaned:
cleaning interval: 2 weeks
cleaning required: No
Verify that the values for these attributes are appropriate
for your installation. If not check documentation on how to
set up automated cleaning cartridge support.
Jukebox has been added successfully
Would you like to configure another jukebox? (yes/no) no
一般来讲,我们在第一次将磁带库配置到Legato Networker 系统中后,都先对磁带库进行置位,然后在进行使用,下面是一个对磁带库进行重新置位的例子。
# nsrjb -vHE
setting verbosity level to `1'
hardware_reset:
Jukebox handle being opened at port scsidev@3.0.1
hardware_reset:
Jukebox handle being closed at port scsidev@3.0.1
Jukebox handle being opened at port scsidev@3.0.1
box_inventory:
Jukebox handle being closed at port scsidev@3.0.1
box_inventory_free:
Jukebox handle being opened at port scsidev@3.0.1
box_comp_status():
box_comp_status_free():
box_comp_status():
box_comp_status_free():
Jukebox handle being closed at port scsidev@3.0.1
box_display: `' for drive `/dev/rmt/0cbn'
box_display: `' for drive `/dev/rmt/1cbn'作者: estar 时间: 2007-02-06 15:24
lz太猛了,pf作者: 风之幻想 时间: 2007-02-07 11:14
自己顶一下.作者: 笑看风云_淡 时间: 2007-02-07 11:16