- 论坛徽章:
- 0
|
如果可以的话使用 sys-unconfig 重新做一下系统配置
NAME
sys-unconfig - undo a system's configuration
SYNOPSIS
/usr/sbin/sys-unconfig
DESCRIPTION
The sys-unconfig command is used to restore a system's con-
figuration to an "as-manufactured" state, ready to be recon-
figured again. The system's configuration consists of host-
name, Network Information Service (NIS) domain name,
timezone, IP address, IP subnet mask, and root password.
This operation is the inverse of those performed by the
sysidnet(1M), sysidns(1M), and sysidsys(1M) programs run at
boot. See sysidtool(1M). |
|