免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
1234下一页
最近访问板块 发新帖
查看: 28615 | 回复: 30

[SCO UNIX] OSR507光盘启动安装文档(不使用软驱或USB软驱),对一些新的服务器比较有用 [复制链接]

论坛徽章:
1
荣誉版主
日期:2011-11-23 16:44:17
发表于 2008-04-03 16:53 |显示全部楼层
这文档是以前测试HP服务器的时候写的
现在不做SCO 的东西了,但感情依然很深
  1. 服务器认证测试报告:
  2. 型号:Conpaq proliant DL580 G5服务器
  3. 机架式配置,4U高度
  4. 主要配置:
  5. 处理器、操作系统和内存
  6. 处理器类型        英特尔® 至强® E7310 四核处理器 1.60GHz
  7. 处理器速度        1.60GHz
  8. 处理器数        2 个处理器
  9. 处理器升级        多达 4 个处理器
  10. 可用的处理器核数        四
  11. 系统总线        1066 MHz 前端总线
  12. 内置高速缓存        2 x 2MB 二级高速缓存
  13. 标配内存        4GB (4 x 1GB) 标配内存
  14. 最大内存        128GB
  15. 内存类型        PC2-5300 全缓冲 DIMM (DDR2-667)
  16. 内存插槽        16 个 DIMM 插槽
  17. 内置驱动器
  18. 内置硬盘驱动器        73G SAS硬盘
  19. 硬盘控制器        HP 嵌入式智能阵列 P400i/256MB 高速缓存
  20. 内置驱动器机架        标配支持8 个 SFF SAS/SATA,最多可支持16个SFF SAS/SATA
  21. 光驱        标配薄型 DVD 光驱
  22. 系统特性
  23. 机箱类型        4U 机架
  24. 芯片组        工业标准英特尔 7300 芯片组
  25. 网络接口        带有 TCP/IP 卸载引擎的 2 个嵌入式 NC373i 多功能千兆网络适配器,通过一个可选的 ProLiant Essentials 许可套件支持加速的 iSCSI
  26. 外置 I/O 端口        1 个串行端口、1 个定位设备(鼠标)、1 个正面视频接口、1 个背面视频接口、1 个键盘、共 6 个 USB 2.0 端口:正面 2 个;背面 2 个;内部 2 个;1 个 iLO 2 远程管理端口;2 个 RJ-45 网络接口
  27. 扩展槽        利用选件卡可获得更多的 PCI-Express 插槽(多达 11 个可用);标配 8 个插槽:(4) 个全长 PCI-E x8、(1) 个全长 PCI-E x4 和 (3) 个半长 PCI-E x4 插槽;选件卡添加 (3) 个 PCI-X 或 (3) 个 PCI-E x8
  28. 电源类型        800/1200 瓦交流电源
  29. 电源要求        100 伏 至 120 伏交流电/200 伏至 240 伏交流电; 50 到 60 赫兹
  30. 兼容的操作系统        Microsoft® Windows® Server 2003;Red Hat Enterprise Linux;SuSE Linux Enterprise Server;Novell NetWare;Sun Solaris Intel Platform Edition;VMware 虚拟化软件
  31. 外形尺寸(宽 x 长 x 高)        48.3 x 67.3 x 17.6 厘米
  32. 重量        30.8 千克
  33. 符合业界标准        符合 ACPI 2.0.标准;符合 PCIE 1.0a 标准;支持 PXE;支持 WOL;支持物理地址扩展 (PAE);Microsoft® 徽标认证;支持 USB 2.0

  34. 测试版本:SCO openserver 5.0.7
  35. 测试安装:
  36. 1、安装操作系统前准备。
  37. 下载文件
  38. 新版507安装光盘:
  39. [url]ftp://ftp.sco.com/pub/openserver5/507/iso/OpenServer-5.0.7-July2005/OpenServer-5.0.7Hw-10Jun05_1800.iso[/url]
  40. MP5 补丁:
  41. [url]ftp://ftp.sco.com/pub/openserver5/507/iso/osr507suppcd5/osr507suppcd5.iso[/url]
  42. HP EFS 驱动:
  43. [url]http://h50176.www5.hp.com/support/403684-AA1/more_info_local_23713.html[/url]
  44. 5708网卡驱动:
  45. [url]http://www.broadcom.com/support/ethernet_nic/driver-sla.php?driver=NX2-SCO-OpenServer5[/url]

  46. 2、制作安装引导CD
  47. 因为本机不支持软驱安装(包括USB软件),故使用引导CD安装方式
  48. 可以使用2种方式获得带Hpsas驱动的引导光盘

  49. a、网络下载
  50. [url]ftp://ftpput.sco.com/tmp/osr507boot-CD-hpsas.iso[/url]

  51. b、自己制作带有Hpsas驱动的引导光盘,制作方式见下文
  52. 注意:需要一台已安装好OpenServer507的系统来制作光盘引导盘

  53. 1- 下载 2.88 MB OSr507 boot CD image 文件:
  54.              [url]ftp://ftpput.sco.com/tmp/osr507boot-CD.img[/url]         
  55.              这个文件是用来制作光盘引导盘必须的文件   
  56.      
  57. 2- 拷贝HP EFS 软件中的HBA文件到/tmp 目录下起名为btld1.img
  58. 拷贝osr507boot-CD.img 到 /tmp/image 目录下
  59.     注意:/tmp/image需要自己手工建立
  60.           # mkdir /tmp/image
  61.          
  62. 3- 使用marry和mnount命令挂载文件         
  63.                # marry -a /tmp/image/osr507boot-CD.img
  64.                # mount /dev/marry/tmp/image/osr507boot-CD.img /mnt
  65.                # mkdir /mnt2 (create a new mnt2 directory)
  66.                # marry -a /tmp/btld1.img
  67.                # mount -r /dev/marry/tmp/btld1.img /mnt2         
  68.              注意:
  69.              假如你使用的是软驱BTLD文件,执行如下命令
  70.                  # mount -r /dev/fd0 /mnt2
  71.            
  72. 4- 检验 /mnt 和 /mnt2 并做连接:           
  73.              /mnt
  74.              -r--r-----   2 bin   bin   52985 May 20  2005 ahslink
  75.              -r--------   1 bin   bin   74648 May 20  2005 boot
  76.              drwxrwxrwx   3 bin   bin      48 May 20  2005 etc
  77.              -r--r-----   2 bin   bin   52985 May 20  2005 link
  78.              drwxrwxrwx   4 bin   bin      64 May 20  2005 opt
  79.              -rw-r--r--   1 bin   bin  154182 May 20  2005 rootFS
  80.              -rw-r--r--   1 bin   bin  652840 May 20  2005 unix
  81.               /mnt2
  82.               drwx------   4 root  sys    64 Jan 11  2007 ad160
  83.               drwx------   4 root  sys    64 Jan 11  2007 ciss
  84.               drwx------   4 root  sys    64 Jan 11  2007 CUAD160
  85.               drwx------   3 root  sys    48 Jan 11  2007 CUCISS
  86.               drwx------   3 root  sys    48 Jan 11  2007 CUHPSAS
  87.               drwx------   4 root  sys    64 Jan 11  2007 CULSI
  88.               drwx------   4 root  sys    64 Jan 11  2007 hpsas
  89.               drwx------   2 root  sys    48 Jan 11  2007 install
  90.               drwx------   4 root  sys    64 Jan 11  2007 lsil
  91.            
  92.               现在拷贝HPSAS驱动文件到引导光盘目录
  93.               from /mnt2 to /mnt:
  94.            
  95.                   # cp -rp /mnt2/hpsas /mnt
  96.                   # chown -R root:sys /mnt/hpsas
  97.                   # chmod 755 /mnt/hpsas
  98.            
  99.               /mnt will now have the following list:
  100.               -r--r-----   2 bin   bin    52985 May 20  2005 ahslink
  101.               -r--------   1 bin   bin    74648 May 20  2005 boot
  102.               drwxrwxrwx   3 bin   bin       48 May 20  2005 etc
  103.               -r--r-----   2 bin   bin    52985 May 20  2005 link
  104.               drwsr-xr-x   4 root  sys       64 Jul 14  2006 hpsas
  105.               drwxrwxrwx   4 bin   bin       64 May 20  2005 opt
  106.               -rw-r--r--   1 bin   bin   154182 May 20  2005 rootFS
  107.               -rw-r--r--   1 bin   bin  1652840 May 20  2005 unix
  108.                              
  109. 5- Unmount and de-marry the two images:         
  110.                  # umount /mnt
  111.                  # marry -d /dev/marry/tmp/image/osr507boot-CD.img
  112.                  # umount /mnt2
  113.                  # marry -d /dev/marry/tmp/btld1.img               
  114.            
  115. 6- 制作带有“hpsas”驱动的BOOT光盘ISO映像文件,  
  116.              we need to create a bootable iso image using the  
  117.              mkisofs command:           
  118.          # mkisofs -r -l -v -o /tmp/boot.iso -b osr507boot-CD.img /tmp/image         
  119. mkisofs 2.01 (i386-pc-sco3.2v5.0.7)
  120. Scanning /tmp/image
  121. Writing:   Initial Padblock                        Start Block 0
  122. Done with: Initial Padblock                        Block(s)    16
  123. Writing:   Primary Volume Descriptor               Start Block 16
  124. Done with: Primary Volume Descriptor               Block(s)    1
  125. Writing:   Eltorito Volume Descriptor              Start Block 17
  126. Size of boot image is 5760 sectors -> Emulating a 2880 kB
  127. floppy
  128. Done with: Eltorito Volume Descriptor              Block(s)    1
  129. Writing:   End Volume Descriptor                   Start Block 18
  130. Done with: End Volume Descriptor                   Block(s)    1
  131. Writing:   Version block                           Start Block 19
  132. Done with: Version block                           Block(s)    1
  133. Writing:   Path table                              Start Block 20
  134. Done with: Path table                              Block(s)    4
  135. Writing:   Directory tree                          Start Block 24
  136. Done with: Directory tree                          Block(s)    1
  137. Writing:   Directory tree cleanup                  Start Block 25
  138. Done with: Directory tree cleanup                  Block(s)    0
  139. Writing:   Extension record                        Start Block 25
  140. Done with: Extension record                        Block(s)    1
  141. Writing:   The File(s)                             Start Block 26
  142. Total translation table size: 2048
  143. Total rockridge attributes bytes: 342
  144. Total directory bytes: 0
  145. Path table size(bytes): 10
  146. Done with: The File(s)                             Block(s)    1441
  147. Writing:   Ending Padblock                         Start Block 1467
  148. Done with: Ending Padblock                         Block(s)    150
  149. Max brk space used 4000
  150. 1617 extents written (3 MB)           
  151.               
  152.              制作完成后文件/tmp/boot.iso
  153.              可使用SCO系统带的 "cdrecord" 刻录也可拷贝至其它主机系统刻录

  154. 到此带有“hpsas”驱动的BOOT光盘制作完成

  155. 3、安装系统

  156. 安装必须使用July 2005 cut of SCO OpenServer 5.0.7 install CD
  157. 1- 使用制作好的Hpsas BOOT光盘启动,输入引导字符串
  158.    Now add the following install boot string   
  159.                   boot
  160.                   : defbootstr link=fd(64)hpsas
  161.    当提示插入hpsas驱动盘时,回车继续安装

  162. 2- 当系统安装蓝色界面出现后,取出Hpsas BOOT光盘,插入July 2005 OSR507 CD安装盘
  163. 输入正确序列号,依提示输入必要信息
  164. 当信息配置结束时,见下文
  165. The BTLD package will now be extracted        
  166.                   mount: Bad address                  
  167.                   Please select the floppy device you are using           
  168.                      (1) /dev/fd0  
  169.                      (2) /dev/fd1
  170.            
  171.                choose option (2) and you will be asked to insert the
  172.                lsil BTLD floppy disk again:  这里需要选择2
  173.                        
  174.                    Please insert the floppy for BTLD package: lsil
  175.                    and press <Return>:  
  176.                         
  177.                执行 RETURN 系统会有如下信息:      
  178.                   mount: Bad address, Could not mount the BTLD floppy
  179.                   You may:
  180.                      (a) try again  
  181.                      (b) abort BTLD load, but continue installation  
  182.                      (c) abort the installation  
  183.                   Respond with one of (a,b,c):           
  184.                choose option "b". 这里选择b
  185. 直到系统安装完毕

  186. 3- 插入July 2005 OSR507 CD光盘引导系统到boot提示符下,敲入引导字符:
  187.               At the Boot prompt, enter either one of the following boot string:
  188.            
  189.                   boot
  190.                   : defbootstr link=fd(64)lsil root=hd(42) Srom=wd(0,0,0,0)
  191. 系统引导后,进入单用户状态:
  192. (注意:系统一定要进入单用户状态操作,也就是在Ctrl+D选项时,直接输入root用户口令)
  193. 执行以下操作安装hpsas 驱动到系统中
  194. Mount the BTLD Boot CD and install the "hpsas" BTLD:
  195.                   # mount /dev/cd0 /mnt
  196.                   # mkdir /mnt2
  197.                   # marry -a /mnt/osr507boot-CD.img
  198.                   # mount -r /dev/marry/mnt/osr507boot-CD.img /mnt2
  199.                   # btldinstall /mnt2
  200. 提示是否更新hpsas驱动选择“Y”,到安装完成并手工LINK核心
  201.             relink the kernel
  202.                  # /etc/conf/conf/link_unix

  203.             un-marry and unmount the BTLD Boot CD and reboot
  204.                  # umount /mnt2
  205.                  # marry -d /dev/marry/mnt/osr507boot-CD.img
  206.                  # umount /mnt
  207.                  # init 6
  208. 至此安装系统结束

  209. 4、 加入系统升级包
  210. 系统安装完成后,
  211. 1- 安装SMP支持包,在不从启系统前继续安装MP5补丁
  212. 2- Supplement CD 5安装
  213. 3- 安装网卡驱动并配置网络 (注:使用光盘安装网卡驱动)
  214.   此网卡芯片为BCME 5708         
  215. 至此系统全程配置安装完成                   注意:全程未使用软驱(包括USB软驱)
复制代码

论坛徽章:
1
荣誉版主
日期:2011-11-23 16:44:17
发表于 2008-04-03 16:56 |显示全部楼层
这个文档是测试HP DL580G5 的时候写的
其它服务器的配置和安装方法大同小异
有啥不懂,跟贴我给大家解疑惑

论坛徽章:
0
发表于 2008-04-05 08:43 |显示全部楼层
楼主的东西都是好货,先收下

论坛徽章:
0
发表于 2008-04-09 16:07 |显示全部楼层
answer现在去哪里高就了呀?

论坛徽章:
0
发表于 2008-06-30 16:41 |显示全部楼层

大问题,请指教,急急

气死了,今天忙了一天,就是为了在IBM X36500上装sco unix5.0.6,哎,我很无奈呀~~~恨死SCO了!服务器太新了,SCO太老了~~~

装过程中要求加载BTLD Packages报错,好像认不到,
具体信息如下:
Preparing root filesystem......Done..
The BTLD Packages will now be extracted
mount:Bad address.
please select the floppy device you are using!!
(1)/dev/fd0
(2)/dev/fd1
##这两个我都试了,最后还有提示:
Counld mount the BTLD floppy
(a)Try again (b)Abort BTLD load ,but contimue installation.   (c)ignore ,exit installation

选b后,,可以继续装,但装完重启后,报错:

WARNING:hd:no root disk controller was found
hd: a Boot-Time Loadable Driver may be required
H iinit
PANIC:srmountfun -Error 19 mounting rootdev(1/42)
Error 19 opening dumpdev (1/41)
Dump not completed
**Safe to Power Off **
**Press Ang Key to Reboot **

[ 本帖最后由 lovehust 于 2008-6-30 16:58 编辑 ]

论坛徽章:
0
发表于 2008-06-30 16:55 |显示全部楼层

请教

3- 插入July 2005 OSR507 CD光盘引导系统到boot提示符下,敲入引导字符:
              At the Boot prompt, enter either one of the following boot string:
           
                  boot
                  : defbootstr link=fd(64)lsil root=hd(42) Srom=wd(0,0,0,0)
系统引导后,进入单用户状态:
(注意:系统一定要进入单用户状态操作,也就是在Ctrl+D选项时,直接输入root用户口令)
执行以下操作安装hpsas 驱动到系统中
Mount the BTLD Boot CD and install the "hpsas" BTLD:
                  # mount /dev/cd0 /mnt
                  # mkdir /mnt2
                  # marry -a /mnt/osr507boot-CD.img
                  # mount -r /dev/marry/mnt/osr507boot-CD.img /mnt2
                  # btldinstall /mnt2
提示是否更新hpsas驱动选择“Y”,到安装完成并手工LINK核心
            relink the kernel
                 # /etc/conf/conf/link_unix

            un-marry and unmount the BTLD Boot CD and reboot
                 # umount /mnt2
                 # marry -d /dev/marry/mnt/osr507boot-CD.img
                 # umount /mnt
                 # init 6
至此安装系统结束

楼主的这一步July 2005 OSR507 CD 是SCO 5.0.7的安装盘吧.但defbootstr link=fd(64)lsil root=hd(42) Srom=wd(0,0,0,0)的是时候,系统提示link=fd(64)lsil  这个找不以,无赖只得按Q退出!
请大家给我这一步详细的帮助!急!
谢谢

论坛徽章:
0
发表于 2008-06-30 19:45 |显示全部楼层
这个是错误的,需要link=fd(64)驱动包名
驱动包名根据具体的服务器不同。3650,就输入3650的驱动包名。记得8k卡好像是aacraid

论坛徽章:
0
发表于 2008-07-01 07:01 |显示全部楼层

急求

defbootstr link=fd(64)aacraid root=hd(42) Srom=wd(0,0,0,0)  就是这个样子也还是出错误

顺道问一下,fd(40) .fd(41),fd(42),fd(60),fd(61),fd(64).表示的确切意思呀,是不是在boot里面输入的这个方便有问题呀,我看在别人在这一步的时候用的是:boot:hd(40)unix.install link=fd(60)驱动包名 Sdsk=驱动包名(0,0,0,0) Srom=wd(0,0,0,0) ramdisk=hd(40)ramdisk.Z ram.preload=7 root=ram(7) 。每个人在这一行都是有所不用。高人能给一下详解吗?

论坛徽章:
0
发表于 2008-07-01 07:08 |显示全部楼层

急解

输入unix.install的时候,为什么说在找不到呢?

论坛徽章:
0
发表于 2008-07-01 16:25 |显示全部楼层
8楼的操作错误,需要用有驱动包的光盘启动输入字符串的。请问楼主制作了带驱动包的启动光盘了吗?
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP