- 论坛徽章:
- 0
|
★主服务器安Agent
advance-Domain aam51-port 8042
yes.frist node
安装路径c:\.........
镜像网卡:10.1.1.1
验证码-Install-装完不选择重启
★主服务器安Console
安装路径c:\.........
Components:
Program files√
Online Docimention√
Install 重启
主重启后在Console加入备机节点并给备机Admin权限
----------------------------------------------------------------------------------------------------------------------
★备服务器安Agent
Domain aam51-port 8042
No.these is an exiting node in the aam Domain
镜像网卡:10.1.1.2
Primary: rmyyserver2
★备服务器安console
路径c:\.............
Components:
Program files√
Online Docimention√
Install 后重启
-----------------------------------------------------------------------------------------------------------------------
★检查服务:Mirror , Agent, Backbone 启动ClusTransport禁用
主服务器打开Console检查Node主备机正常(绿灯)
-----------------------------------------------------------------------------------------------------------------------
★IP Adress
添加虚拟IP,去掉“Get IP Form Name Service”
IP Adress输入168.168.0.1(255.255.255.0)
下面的Target Interface添入rmyyserver2 , rmyyserver的网卡
成为:
Node Target interface BaseIP
rmyyserver2 rmyyserver2:168 168.168.0.2
rmyyserver rmyyserver:168 168.168.0.3
--------------------------------------------------------------------------------------------------------------------------
★镜像准备
Node里rmyyserver2-Failure Detection and mirroring 里的Remote Mirror Host指向rmyyserver
成为:
Local mirror address 10.1.1.1
Romote Mirror Host rmyyserver
add path完成;备机也同理设置指向
Remote Mirror Host rmyyserver2
add path完成。
☆但是要做拔掉网线自动切换的功能时,要这样设定:
◎Node rmyyserver2
Paths Defined for node
Verification 10.0.0.1 -----
Verification 168.168.0.2 -----
Domain 10.0.0.1 10.0.0.2
Domain 168.168.0.2 168.168.0.3
◎Node rmyyserver
Paths Defined for node
Verification 10.0.0.2 -----
Verification 168.168.0.3 -----
Domain 168.168.0.3 168.168.0.2
Domain 10.0.0.2 10.0.0.1
--------------------------------------------------------------------------------------------------------------
本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u2/70914/showart_727717.html |
|