求助，我在DELL 1950服务器上安装SCO 5.05一直提示 找不到磁盘控制器，安装不成功呀

powerdell

zdlaser

我的QQ：281300792

zdlaser

没QQ。
PM给你了。

powerdell

晕呀，有MSN没，我的MSN xwyi@live.cn

powerdell

这是我在SCO网站上看到的Hardware certificationNew Servers from Dell (PowerEdge 1950 III), HP (ProLiant BL460c) and Intel (S3200SHL) have been certified or have been updated with new information or tested as compatible. (OpenServer 6 and UnixWare)The Perc 6i/SAS (LSISAS1078 chipset, SAS RAID) controller from Dell has been certified.The HP StorageWork Tape LTO-4 1840 (SCSI version) has been certified for OpenServer 6, UnixWare 7.1.4 and OpenServer 5.0.7. The tape drive has been certified on a Adaptec 29160 Ultra160 and a LSI 53C1020 Ultra320 SCSI controller. The SAS version of that Tpe was already certified before. For more details check the SCO hardware databaseBack

zdlaser

SCO网站说的只是针对SCO OSR6.0和Unixware的情况，SCO OSR6.0用的是和Unixware7.1.4的内核，所以驱动可以用Unixware的驱动，和老的5.0.6的驱动不一样了。
PERC6i有SCO OSR6.0和Unixware的驱动，没有SCO OSR5.0.6驱动。
安装SCO5.0.6需要用SAS6i卡。

powerdell

SAS6i这个卡的驱动我也找了呀，但就是驱不起来呀

powerdell

这是我安装时的图片，我在BOOT时输入：LINK  在输入LSIL

powerdell

这是我SAS的型号

powerdell

自检图片

powerdell

这就是安装时报错的图