- 论坛徽章:
- 0
|
看到syslog.log里内容如下：
CURRENT MONITOR DATA:
Event Time..........: Thu Apr 9 09:25:09 2009
Severity............: SERIOUS
Monitor.............: disk_em
Event #.............: 100038
System..............: rx2600
Summary:
Disk at hardware path 0/1/1/1.2.0 : Media failure
Description of Error:
The format of the medium in the device is corrupt. The medium is unusable.
Probable Cause / Recommended Action:
A format operation in progress on the device may have been interrupted.
Restart the formatting process.
Alternatively, the medium in the device is flawed. If the medium is
removable, replace the medium.
Alternatively, if the medium is not removable, the device has experienced
a hardware failure. Repaired or replace the device, as necessary.
Additional Event Data:
System IP Address...: 192.168.89.110
Event Id............: 0x49dd4e7500000000
Monitor Version.....: B.01.01
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_disk_em.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
0x49dd4e7500000000
Additional System Data:
System Model Number.............: ia64 hp server rx2600
OS Version......................: B.11.23
STM Version.....................: B.40.00
EMS Version.....................: A.04.00
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/scsi.htm#100038
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
Component Data:
Physical Device Path...: 0/1/1/1.2.0
Device Class...........: Disk
Inquiry Vendor ID......: HP 146 G
Inquiry Product ID.....: ST3146807LC
Firmware Version.......: HPC4
Serial Number..........: 3HY63YEW00007416D1BJ
Product/Device Identification Information:
Logger ID.........: sdisk
Product Identifier: SCSI Disk
Product Qualifier.: HP146
SCSI Target ID....: 0x02
SCSI LUN..........: 0x00
I/O Log Event Data:
Driver Status Code..................: 0x0000007C
Length of Logged Hardware Status....: 22 bytes.
Offset to Logged Manager Information: 24 bytes.
Length of Logged Manager Information: 34 bytes.
Hardware Status:
Raw H/W Status:
0x0000: 00 00 00 02 F0 00 03 00 00 00 00 0A 00 00 00 00
0x0010: 31 00 0C 00 00 00
SCSI Status...: CHECK CONDITION (0x02)
Indicates that a contingent allegiance condition has occurred. Any
error, exception, or abnormal condition that causes sense data to be
set will produce the CHECK CONDITION status.
SCSI Sense Data:
Undecoded Sense Data:
0x0000: F0 00 03 00 00 00 00 0A 00 00 00 00 31 00 0C 00
0x0010: 00 00
SCSI Sense Data Fields:
Error Code : 0x70
Segment Number : 0x00
Bit Fields:
Filemark : 0
End-of-Medium : 0
Incorrect Length Indicator : 0
Sense Key : 0x03
Information Field Valid : TRUE
Information Field : 0x00000000
Additional Sense Length : 10
Command Specific : 0x00000000
Additional Sense Code : 0x31
Additional Sense Qualifier : 0x00
Field Replaceable Unit : 0x0C
Sense Key Specific Data Valid : FALSE
Sense Key Specific Data : 0x00 0x00 0x00
Sense Key 0x03, MEDIUM ERROR, indicates that the command terminated
with a nonrecovered error condition that was probably caused by a
flaw in the medium or an error in the recorded data. This sense key
may also be returned if the device is unable to distinguish between a
flaw in the medium and a specific hardware failure (sense key 0x04).
The combination of Additional Sense Code and Sense Qualifier (0x3100)
indicates: Medium format corrupted.
SCSI Command Data Block:
Command Data Block Contents:
0x0000: 25 00 00 00 00 00 00 00 00 00
Command Data Block Fields (10-byte fmt):
Command Operation Code...(0x25)..: READ CAPACITY
Logical Unit Number..............: 0
Relative Address Bit.............: 0
Partial Medium Indicator Bit.....: 0
Logical Block Address............: 0 (0x00000000)
Manager-Specific Data Fields:
Request ID.............: 0x0300060D
Data Residue...........: 0x00000000
CDB status.............: 0x00000002
Sense Status...........: 0x00000000
Bus ID.................: 0x03
Target ID..............: 0x02
LUN ID.................: 0x00
Sense Data Length......: 0x12
Q Tag..................: 0xFD
Retry Count............: 5
我想问一下。重新再格式化一遍能行吗？毕竟盘比较大，时间比较长。
还有
Alternatively, if the medium is not removable, the device has experienced
a hardware failure. Repaired or replace the device, as necessary.
是什么意思。我怎么repaired？谢谢 |
|
免费注册
发表于 2009-04-08 17:14
