在AIX5.3装oracle10g遇到的问题，请帮忙解决一下

cq_2006

环境是  AIX5.3   安装oracle10g


/database/Disk1/runInstaller 的时候

提示

Has 'rootpre.sh' been run by root ? [y/n] (n)


在另一个dtterm中执行rootpre.sh 脚本，

./rootpre.sh output will be logged in /tmp/rootpre.out_09-12-21.02:57:08
Kernel extension /etc/pw-syscall.32bit_kernel is loaded.
Unloading the existing extension: /etc/pw-syscall.32bit_kernel....

Oracle Kernel Extension Loader for AIX
       Copyright (c) 1998,1999 Oracle Corporation


Unconfigured the kernel extension successfully
Unloaded the kernel extension successfully
Saving the original files in /etc/ora_save_09-12-21.02:57:08....
Copying new kernel extension to /etc....
Loading the kernel extension from /etc

Oracle Kernel Extension Loader for AIX
       Copyright (c) 1998,1999 Oracle Corporation


Successfully loaded /etc/pw-syscall.32bit_kernel with kmid: 0x2f12ebc
Successfully configured /etc/pw-syscall.32bit_kernel with kmid: 0x2f12ebc
The kernel extension was successfuly loaded.

Configuring Asynchronous I/O....
Asynchronous I/O is already defined

Configuring POSIX Asynchronous I/O....
Posix Asynchronous I/O is already defined

Checking if group services should be configured....
Nothing to configure.


完成后继续前面的安装过程
Has 'rootpre.sh' been run by root ? [y/n] (n)
y

提示
Starting Oracle Universal Installer...

No pre-requisite checks found in oraparam.ini, no system pre-requisite checks wi
ll be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-03-14_06
-43-08PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as exampl
es to set the DISPLAY environment variable:
- For csh:                      % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:         $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
        echo $SHELL
Use the following command to view the current DISPLAY environment variable setti
ng:
        echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole
as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based
program that comes with the native operating system such as 'xclock':
        % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server
or OS vendor for further assistance.
Typical path for xclock: /usr/bin/X11/xclock
$ xclock
Error: Can't open display:
$ export DISPLAY=192.168.1.112:0.0
$ xclock
有个时钟出现

再次执行 /database/Disk1/runInstaller
然后 Has 'rootpre.sh' been run by root ? [y/n] (n)
y
还是提示
If you are not able to run xclock successfully, please refer to your PC-X Server
or OS vendor for further assistance.
Typical path for xclock: /usr/bin/X11/xclock

请问是什么地方出了问题，正常在这里应该出现图形安装界面的！！！  （本机IP是192.168.1.112)
$

[ 本帖最后由 cq_2006 于 2009-12-23 10:59 编辑 ]

ziggler

If you are not able to run xclock successfully, please refer to your PC-X Server
or OS vendor for further assistance.
Typical path for xclock: /usr/bin/X11/xclock
$ xclock
Error: Can't open display:
$ export DISPLAY=192.168.1.112:0.0
$ xclock

XCLOCK的问题吧

cq_2006

原帖由 ziggler 于 2009-12-22 15:09 发表
If you are not able to run xclock successfully, please refer to your PC-X Server
or OS vendor for further assistance.
Typical path for xclock: /usr/bin/X11/xclock
$ xclock
Error: Can't open d ...

我执行 xclock  
有一个时钟显示，应该不是xclock 问题吧
如果是，应该怎么解决呢？

Configuring Asynchronous I/O....
Asynchronous I/O is already defined

Configuring POSIX Asynchronous I/O....
Posix Asynchronous I/O is already defined

这两句话有什么问题没有？

ziggler

DISPLAY not set. Please set the DISPLAY and try again.

这个设置了吗？

cq_2006

原帖由 ziggler 于 2009-12-22 15:43 发表
DISPLAY not set. Please set the DISPLAY and try again.

这个设置了吗？

这个已经设置过了 ，在倒数第五行

ziggler

Xlib: connection to "192.168.1.112:0.0" refused by server
Xlib: Client is not authorized to connect to Server

那就这个错误很关键？

cq_2006

原帖由 ziggler 于 2009-12-22 16:19 发表
Xlib: connection to "192.168.1.112:0.0" refused by server
Xlib: Client is not authorized to connect to Server

那就这个错误很关键？

能不能是在执行rootpre.sh 中 下面提示  有问题呢？


Configuring Asynchronous I/O....
Asynchronous I/O is already defined

Configuring POSIX Asynchronous I/O....
Posix Asynchronous I/O is already defined

ziggler

你怀疑这个啊？

这个看正常啊？

meilixueshan

root：  xhost +

meilixueshan

原帖由 cq_2006 于 2009-12-22 15:35 发表



我执行 xclock  
有一个时钟显示，应该不是xclock 问题吧
如果是，应该怎么解决呢？

Configuring Asynchronous I/O....
Asynchronous I/O is already defined

Configuring POSIX Asynchronous  ...

AIO系统已经打开了，就有这样的消息，正常现象。