免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
123下一页
最近访问板块 发新帖
查看: 5617 | 回复: 24
打印 上一主题 下一主题

弱智问题cisco2611 show interfaces什么都没有是怎么回事 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2010-06-21 15:24 |只看该作者 |倒序浏览
rt

论坛徽章:
5
IT运维版块每日发帖之星
日期:2015-08-06 06:20:00IT运维版块每日发帖之星
日期:2015-08-10 06:20:00IT运维版块每日发帖之星
日期:2015-08-23 06:20:00IT运维版块每日发帖之星
日期:2015-08-24 06:20:00IT运维版块每日发帖之星
日期:2015-11-12 06:20:00
2 [报告]
发表于 2010-06-21 15:40 |只看该作者
show ver
show int
贴上来。

论坛徽章:
0
3 [报告]
发表于 2010-06-21 15:46 |只看该作者
Router#sh ver            
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(28d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 19-Aug-05 16:34 by pwade
Image text-base: 0x80008088, data-base: 0x80609A30

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

Router uptime is 49 minutes
System restarted by power-on
System image file is "flash:c2600-i-mz.120-28d.bin"

cisco 2600 (MPC860) processor (revision 0x100) with 26624K/6144K bytes of memory
.
Processor board ID JAD06230JCS (3724983807)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
32K bytes of non-volatile configuration memory.

Configuration register is 0x2102

Router#show int
Router#

论坛徽章:
0
4 [报告]
发表于 2010-06-21 15:47 |只看该作者
难道是坏了扔一边的,
ps:角落里翻出来的

论坛徽章:
5
IT运维版块每日发帖之星
日期:2015-08-06 06:20:00IT运维版块每日发帖之星
日期:2015-08-10 06:20:00IT运维版块每日发帖之星
日期:2015-08-23 06:20:00IT运维版块每日发帖之星
日期:2015-08-24 06:20:00IT运维版块每日发帖之星
日期:2015-11-12 06:20:00
5 [报告]
发表于 2010-06-21 15:52 |只看该作者
照这个来看,应该是坏掉的。
你帖一个全的启动信息我看下。

论坛徽章:
0
6 [报告]
发表于 2010-06-21 16:02 |只看该作者
Router#reload            

Proceed with reload? [confirm]controller status            

00:01:19: %SYS-5-RELOAD: Reload requestedging          State of each debugging opt
System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)      Dynamic Host Configuration Protocol status                     
Copyright (c) 2002 by cisco Systems, Inc.
  diag               Show diagnostic inf
C2600 platform with 32768 Kbytes of main memory                                               

program load complete, entry point: 0x80008ameter                                   
  frame-r
################################################################################ history            Display the session command history                        
################### [OK]      
  hosts         

              Restricted Rights Legendrvers, and host table                 

Use, duplication, or disclosure by the Government is      
  interfaces         Interface status and co
subject to restrictions as set forth in subparagraph            
  ip                 IP information   
           cisco Systems, Inc.                       
  memo
           170 West Tasman Drive                                
           San Jose, California 95134-1706ilities database                          



Cisco Internetwork Operating System Software Network time protocol                     
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(28d), RELEASE SOFTWARE (fc1)                                
  pci                PCI Information         
Copyright (c) 1986-2005 by cisco Systems, Inc.  PPP parameters and statistics   
cisco 2600 (MPC860) processor (revision 0x100) with 26624K/6144K bytes of memory
.
Processor board ID JAD06230JCS (3724983807)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
32K bytes of non-volatile configuration memory.



Press RETURN to get started!


00:00:02: %LINK-4-NOMAC: A random default MAC address of 0000.0c82.bdff has
  been chosen.  Ensure that this address is unique, or specify MAC
  addresses for commands (such as 'novell routing') that allow the
  use of this address as a default.
00:00:05: %SYS-5-CONFIG_I: Configured from memory by console
00:00:05: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(28d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 19-Aug-05 16:34 by pwade
Router>




接网线,f0/0和 fa0/1的link和fdx灯都亮

论坛徽章:
0
7 [报告]
发表于 2010-06-21 16:49 |只看该作者
本帖最后由 dreamhunter 于 2010-06-21 16:53 编辑

sh ver信息里没有看到端口。
难道该ios版本不支持FastEthernet端口?

论坛徽章:
0
8 [报告]
发表于 2010-06-21 17:14 |只看该作者

论坛徽章:
0
9 [报告]
发表于 2010-06-21 17:21 |只看该作者
不会是曾经被人升坏了扔一边的,看出厂日期是2002,
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 19-Aug-05 16:34 by pwade
ios确是2005

论坛徽章:
5
IT运维版块每日发帖之星
日期:2015-08-06 06:20:00IT运维版块每日发帖之星
日期:2015-08-10 06:20:00IT运维版块每日发帖之星
日期:2015-08-23 06:20:00IT运维版块每日发帖之星
日期:2015-08-24 06:20:00IT运维版块每日发帖之星
日期:2015-11-12 06:20:00
10 [报告]
发表于 2010-06-21 22:23 |只看该作者
这么看来应该是有问题的了。
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP