- 论坛徽章:
- 0
|
如何验证双机已经配置成功?Cluster已经启动?
用clverify命令检查两台机器的拓扑,报错如下:
CLuster Node 2 error report:
-------------------------------------------------------------------------------------------
Verifying Cluster Topology...
rshd: 0826-813 Permission is denied.
Could not open a socket connection to Node 'phrdbsrv2'. Check root passwords, .
ERROR: Failure in opening a shell socket on node phrdbsrv2.
rshd: 0826-813 Permission is denied.
Could not open a socket connection to Node 'phrdbsrv2'. Check root passwords, .
ERROR: Failure in opening a shell socket on node phrdbsrv2.
Verifying ATM Configuration...
Remember to redo automatic error notification if configuration has changed.
Verification has completed normally.
/usr/sbin/cluster/diag/clconfig: Error(s) have been detected.
Exit Code: 1
Command completed.
-----------------------------------------------------------------------------------------------
Cluster Node 2 error report:
-----------------------------------------------------------------------------------------------
Verifying Cluster Topology...
rshd: 0826-813 Permission is denied.
Could not open a socket connection to Node 'phrdbsrv1'. Check root passwords, p
ermissions, and /.rhosts file.
ERROR: Failure in opening a shell socket on node phrdbsrv1.
rshd: 0826-813 Permission is denied.
Could not open a socket connection to Node 'phrdbsrv1'. Check root passwords, p
ermissions, and /.rhosts file.
ERROR: Failure in opening a shell socket on node phrdbsrv1.
Verifying ATM Configuration...
Remember to redo automatic error notification if configuration has changed.
Verification has completed normally.
/usr/sbin/cluster/diag/clconfig: Error(s) have been detected.
Exit Code: 1
Command completed.
------------------------------------------------------------------------------------------------
看来似乎是两台机器的信任关系未建,可是我检查了.rhosts文件,两台机器的hostname已经互相都加入了对方的文件中,还是不行。
不知还有那里的配置不对,请大虾指教!!
感谢支持!!! |
|