IBM小型机安装环境要求

sucookim

公司正在筹建机房，老板要求我提供一些安装要求：
如：承重、房雷、静电、空调、电源等要求（三到五台小型机670），可能以后会再增加
请同道提供一份参数指标，谢谢

fengjianheng

pSeries 670 (7040-671) (single rack):


Width:
79 cm (30.9 inches) (with acoustic rear door)
79 cm (30.9 inches) (with slim line rear door)

Depth:
149 cm (58.8 inches) (with acoustic rear door)
134 cm (52.8 inches) (with slim line rear door)

Height:
202 cm (79.7 inches) (with acoustic rear door)
202 cm (79.7 inches) (with slim line rear door)

Weight:
1,184 kgs (2,605 lbs maximum) (with acoustic rear door)
1,170 kgs (2,574 lbs maximum) (with slim line rear door)
Operating Environment

Temperature: 16 to 32 degrees C (61 to 90 degrees F)

Temperature with 4mm Tape or DVD RAM or DVD-ROM device in rear positions of the Media Drawer (#8692): Maximum of 24C (75.2F).

Temperature with VXA Tape in front positions of Media Drawer (#8692) without Primary Integrated Battery Backup (#6200) or Redundant Integrated Battery Backup (#6201) installed in system: Maximum operating temperature of 28 C (82.4 F). Refer to the 7040 System Planning Guide for additional details.

Relative Humidity: 8% to 80%

Maximum Wet Bulb: 23 degrees C (73 degrees F)

Sound Power:
7.5 bels (operating/idling with acoustic covers)
7.9 bels (operating/idling with slim line covers)

Sound Pressure:
57 dBa (operating/idling with acoustic covers)
62 dBa (operating/idling with slim line covers)

Maximum Altitude:

System: 3,040 meters (10,000 ft)

Server with DVD-R, DVD-R/W/CD-R, or CD-R/W media installed in the rear positions of the media drawer (#8692): 2,134 meters (7,000 ft)
Power Requirements


Operating voltage @ 50/60 Hz: (3-phase)
200 to 240 V AC
380 to 415 V AC
480 V AC

Operating voltage @ 50/60Hz (Single-phase): 200 to 415V AC

Electrical output: 15,400 watts (maximum)

Power source loading: 6.7 kVA (maximum configuration)

Thermal Output: 6,670 joules/sec (22,800 Btu/hr) (maximum configuration, 16-way CEC)

yanbing

IBM RS/6000小型机安装机房条件
物理尺寸
        机房内部机器布置应具有足够的服务空间，并有可扩充性。
        机房地板承重应大于400kg。
        机房高度要求地板至天棚距离大于2.7m，地面至地板距离为35cm。
        建议机房具有货运通道，便于设备的运送。
RS/6000机房的电气要求：
        要求使用机房专用地，对地电阻小于4Ω。
        要求防静电地板电阻在150kΩ至20MΩ。
        要求UPS供电，具体指标如下：
        频率：        50Hz,+0.5~-0.5
        功率：        0.5KW
        零地之间的电压小于1V，零线，地线连接正确各电源柜、电源线、开关标签明确。
RS/6000机房通讯要求：
        机房至少有一条国内长途电话线，便于维护联络。
4.4RS/6000机房工作环境要求：
        机房空调应使室温度在15-32度。
        相对湿度保持在8%-80%。
RS/6000机房安全性要求：
        要求有防火、防水设备，备有紧急电闸、紧急出口，以及报警、监查设备和电话线路。
RS/6000装机前要求：
地面及地下需要清洁。
UPS电气性能稳定。
各机电源以及机房电工到位。
空调已正常运转两到三天。
消防设备齐全。
地板通讯孔准备好。

sucookim

谢谢

1122331

据说有些机房是氮气灭火的