unixware 711下安装网卡的问题

弱智

reinstalling.....

thnx for your advs....

小小狗

我给你发邮件了，你收到了吗？

弱智

谢谢，在安装。用M3

弱智

I've installed the basic part of uw 711 by default option.

and after it, i run these commands:
pkgadd -d diskette1

then the os prompt me insert 4 floppy disks about HBA, i do it.

so, i type it:
#scoadmin

then i add a new LAN adapter, "ethernet",
the name of NIC: "Digital EtherWORKS 3 Adapther(7.1.1-7.1-2.0.0)

it succeeded, but now i can't add protocol......

some gurus have any advs?
thanx...

弱智

this NIC in bios setup, the name is "compaq NC7760 ....",
but the bcme.pkg prompts me the name is "Broadcom...",
and I've installed the NIC name is "Digital EtherWORKS 3 Adapther(7.1.1-7.1-2.0.0) "

which one is right?

弱智

bingo~~~

i've got it now.

thanx for all help me~~~


the NIC's name is the "Broadcom ...."

弱智

now i can ping any ip in LAN by this NIC under UW711

弱智

终于回到家了。
谢谢紫枫猪猪，lsw，小小狗，78020281，answer，bhtank，CNL ，秋意正浓，nkliyong，lianyong，bigfu等朋友的帮助。

感想主要是，unixware下面的命令简直是折磨，比OpenBSD还要麻烦，太陌生了。其次，HP 350 G3网卡芯片上面是"Broadcom xxxx"，但是当服务器启动时F9进入bios，看到的却是"Compaq NC7760"，更麻烦的是
网卡补丁bcme-2.pkg居然是3com网站的，晕。。。。

purge再次对以上朋友表示感谢。

lsw

搞定就好。我曾经在IBM的一台机子上也是网卡问题，那才叫惨