- 论坛徽章:
- 0
|
上周对RX6600做过一次除尘操作，插插拔拔了一次。本周开机报如下错误。其中显示有固件错误，没有内存，对于固件错误，我按网上做法清除BMC密码，重启故障依旧，是否是硬件出了问题？
[rx6600mp] MP>
.....
Log Entry 18: 26 Dec 2011 09:44:09
Alert Level 7: Fatal
Keyword: BOOT_HALT_CELL
Cell or system halt
Logged by: System Firmware 0
Data: Major change in system state
0xF480003700E00190 000000000000000F
Log Entry 17: 26 Dec 2011 09:44:09
Alert Level 5: Critical
Keyword: SYSTEM_FIRMWARE_ERROR
System firmware error
Logged by: Redundant w/ an E0 code;
Sensor: System Firmware Progress
Data2: PRV State: 0x3F
0xC14EF841E9020180 FF3F4070000F0300
MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >
Log Entry 16: 26 Dec 2011 09:44:09
Alert Level 7: Fatal
Keyword: MEM_NO_MEM_FOUND
No memory found
Logged by: System Firmware 0
Data: Data field unused
0xE08000D100E00160 0000000000000000
Log Entry 15: 26 Dec 2011 09:44:05
Alert Level 5: Critical
Keyword: SYSTEM_FIRMWARE_ERROR
System firmware error
Logged by: Redundant w/ an E0 code;
Sensor: System Firmware Progress
Data2: PRV State: 0x3F
0xC14EF841E5020150 FF3F4070000F0300
MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >
Log Entry 6: 26 Dec 2011 09:43:19
Alert Level 5: Critical
Keyword: VOLTAGE_DEGRADES_TO_NON_RECOVERABLE
Voltage degraded to non-recoverable level - Check all boards with this voltage.
Logged by: Baseboard Management Controller;
Sensor: Voltage - 0.9V - Mem Ext 0
Data1: transition to Non-recoverable from less severe
0x204EF841B7020070 FFFF030768020300
通过如下命令进入，发提示：
[rx6600mp] MP> co
[Use Ctrl-B or ESC-( to return to MP main menu.]
- - - - - - - - - - Prior Console Output - - - - - - - - - -
System going down IMMEDIATELY
System shutdown time has arrived
sync'ing disks (0 buffers to flush):
0 buffers not flushed
0 buffers still dirty
Closing open logical volumes...
Done
- - - - - - - - - - - - Live Console - - - - - - - - - - - -
|
|
免费注册
发表于 2011-12-26 17:46
发表于 2011-12-26 20:46
