*******2.6.8内核运行不了*****求助

sydneylee

    新手，第一次发帖求教，如有说的不明白的地方，欢迎指出，一定改正。
    现有优龙公司FS2410开发板和核心板一块，核心板是在自己新做的底板上用的。开发板光盘上带BOIS、2.4.18版本内核及根文件系统；核心板光盘带BOIS、2.6.8版本内核及根文件系统。

    这两套内核和根文件系统在2410开发板上都能成功运行，但是在核心板上烧写时都是到一半就终止，没有报错。自己做的底板上只焊接了电源部分、232串口、USB及网口部分。

    下图是2.6.8内核运行串口信息，是到网口驱动部分停止的。

    请教各位前辈，这是硬件问题影响到内核吗？（因为在2410开发板上都能正常运行），还是内核的问题？（因为底板上只焊接了烧写内核和根文件系统所需的串口、USB，网口是在运行到网口驱动停止后才焊接的）
    从硬件查找或者内核上都觉得没有明显问题，现在不知道该从哪入手，欢迎大家指点方向！

sydneylee

核心板2.4内核启动信息:

Linux version 2.4.18-rmk7-pxa1 (root@localhost.localdomain) (gcc version 2.95.3 20010315 (release)) #2 Thu Nov 18 09:49:37 CST 2004

CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0

Machine: Samsung-SMDK2410

On node 0 totalpages: 16384

zone(0): 16384 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 load_ramdisk=0 init=/linuxrc console=ttyS0 mem=64M devfs=mount

DEBUG: timer count 15626

Console: colour dummy device 80x30

Calibrating delay loop... 99.94 BogoMIPS

Memory: 64MB = 64MB total

Memory: 62364KB available (1686K code, 343K data, 72K init)

Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)

Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)

Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)

Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)

Page-cache hash table entries: 16384 (order: 4, 65536 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz

Initializing S3C2410 buffer pool for DMA workaround

usbctl: zombie --> [reset] --> default. Device in default state.

S3C2410 USB Controller Core Initialized

USB Function Character Driver Interface - 0.5, (C) 2001, Extenex Corp.

usbctl: Opened for usb-char

usbctl: Started for usb-char

Starting kswapd

devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

tts/00 at I/O 0x50000000 (irq = 52) is a S3C2410

tts/01 at I/O 0x50004000 (irq = 55) is a S3C2410

tts/02 at I/O 0x50008000 (irq = 5 is a S3C2410

Console: switching to colour frame buffer device 30x40

Installed S3C2410 frame buffer

pty: 256 Unix98 ptys configured

s3c2410-ts initialized

s3c2410-pwm initialized

S3C2410 Real Time Clock Driver v0.1

block: 128 slots per queue, batch=32

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

sydneylee

2.6内核启动信息文字版：

CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)

CPU: D VIVT write-back cache

CPU: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

CPU: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

Machine: SMDK2410

ATAG_INITRD is deprecated; please update your bootloader.

Memory policy: ECC disabled, Data cache writeback

S3C2410: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz

Built 1 zonelists

Kernel command line: root=1f02 init=/linuxrc console=ttyS0,115200 devfs=mount display=dh240

irq: clearing pending ext status 00089500

irq: clearing pending status 00002000

irq: clearing subpending status 000000ba

irq: clearing subpending status 00000092

irq: clearing subpending status 00000092

irq: clearing subpending status 00000092

Trying to install chained handler for IRQ47

PID hash table entries: 512 (order 9: 4096 bytes)

setup_timer tcon=00090d09, tcnt c350, tcfg 0000040f,00001032

Console: colour dummy device 80x30

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 64MB = 64MB total

Memory: 61904KB available (2249K code, 487K data, 128K init)

Calibrating delay loop... 99.73 BogoMIPS

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

S3C2410: Initialising architecture

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

VA=0xffc00000, PA=0x30380000, size=0x00027000

NetWinder Floating Point Emulator V0.97 (double precision)

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

NTFS driver 2.1.15 [Flags: R/W].

yaffs Mar  6 2008 10:21:10 Installing.

Console: switching to colour frame buffer device 40x30

s3c2410ts init

s3c2410ts device driver MAJOR:253

s3c2410ts initialized

S3C2410 Real Time Clock Driver v0.1

S3C2410X Serial, (c) 2003 Simtec Electronics

ttyS0 at MMIO 0x50000000 (irq = 70) is a S3C2410

ttyS1 at MMIO 0x50004000 (irq = 73) is a S3C2410

ttyS2 at MMIO 0x50008000 (irq = 76) is a S3C2410

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

loop: loaded (max 8 devices)

Using anticipatory io scheduler

nbd: registered device at major 43

PPP generic driver version 2.4.2

PPP Deflate Compression module registered

PPP BSD Compression module registered

NET: Registered protocol family 24

Cirrus Logic CS8900A driver for Linux (V0.02)