[SOLARIS] what does "prtconf" command use for?

netbanker

OUTPUT:

System Configuration:  Sun Microsystems  i86pc
Memory size: 128 Megabytes
System Peripherals (Software Nodes):

i86pc
    +boot (driver not attached)
        memory (driver not attached)
    aliases (driver not attached)
    chosen (driver not attached)
    i86pc-memory (driver not attached)
    i86pc-mmu (driver not attached)
    openprom (driver not attached)
    options, instance #0
    packages (driver not attached)
    delayed-writes (driver not attached)
    itu-props (driver not attached)
    isa, instance #0
        motherboard (driver not attached)
        lp (driver not attached)
        asy, instance #0
        asy, instance #1
        fdc, instance #0
            fd, instance #0
            fd, instance #1 (driver not attached)
        i8042, instance #0
            keyboard, instance #0
            mouse, instance #0
        PNP0C02 (driver not attached)
        bios (driver not attached)
        bios (driver not attached)
        PNP0C01 (driver not attached)
        PNP0C02 (driver not attached)
        pnpCSC,0000 (driver not attached)
        pnpCSC,0001 (driver not attached)
        pnpCSC,0010 (driver not attached)
        pnpCSC,0003 (driver not attached)
    pci, instance #0
        pci1043,8017 (driver not attached)
        pci1106,8598, instance #0
            display, instance #0
        pci1043,8017 (driver not attached)
        pci-ide, instance #0
            ide, instance #0
                cmdk, instance #0
            ide, instance #1
                sd, instance #0
        pci925,1234, instance #0
        pci1106,3050 (driver not attached)
        pci1436,300 (driver not attached)
    used-resources (driver not attached)
    objmgr, instance #0
    cpu, instance #0 (driver not attached)
    pseudo, instance #0
    xsvc, instance #0

xued

Display system configuration, including the total amount of memory and the device configuration, as described by the system\'s hierarch. This useful tool verifies whether a device has been seen by the system.

Use the output of prtconf and sysdef commands to indentify which disk, tpe, and CD-ROM devices are connected to the system.

netbanker

it seems that i should remember it.