- 论坛徽章:
- 0
|
今天在客户哪边进行备份工作，弄了一下午都没成功日志贴出来求各位帮忙解决。
======= 07/13/13 13:25:52 EAT Started make_tape_recovery. (Sat Jul 13
13:25:52 EAT 2013)
@(#) Ignite-UX Revision C.6.1.44
@(#) net_recovery (opt) $Revision: 10.672 $
* Testing for necessary pax patch.
* Passed pax tests.
* Recovery Archive Description = Recovery Archive
* Recovery Archive Location = /dev/rmt/0mn
* Number of Archives to Save = 2
* Pax type = tar
WARNING: Filesystem /audit is not mounted. It will be ignored.
In? dsk/vg name minor# Associated disks/mountpoints
2 v /dev/vg00 0x00 /dev/dsk/c2t1d0 /dev/dsk/c3t0d0
/dev/vg00/lvol1 /stand 2
/dev/vg00/lvol2
/dev/vg00/lvol3 / 2
/dev/vg00/lvol4 /home 2
/dev/vg00/lvol5 /opt 2
/dev/vg00/lvol6 /tmp 2
/dev/vg00/lvol7 /usr 2
/dev/vg00/lvol8 /var 2
/dev/vg00/websphere /websphere 2
/dev/vg00/lvAudit
** 0 - The Volume Group or Filesystem is Not included in the
System Recovery Archive
** 1 - The Volume Group or Filesystem is Partially included in the
System Recovery Archive
** 2 - The Volume Group or Filesystem is Fully included in the
System Recovery Archive
* Checking Versions of Ignite-UX filesets
WARNING: Filesystem /audit is not mounted. It will be ignored.
* Creating System Configuration.
* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2013-07-13,13:25/system_cfg vg00
save_config: warning - /dev/vg00/lvAudit has an umounted VxFS filesystem on it
* Backing Up Volume Group /dev/vg00
* /usr/sbin/vgcfgbackup /dev/vg00
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
* Creating Map Files for Volume Group /dev/vg00
* /usr/sbin/vgexport -p -m /etc/lvmconf/vg00.mapfile /dev/vg00
vgexport: Volume group "/dev/vg00" is still active.
* Creating Control Configuration.
* Creating Archive File List
WARNING: Filesystem /audit is not mounted. It will be ignored.
WARNING: list_expander returned a warning,please check the log file.
* Creating Archive Configuration
WARNING: Filesystem /audit is not mounted. It will be ignored.
* /opt/ignite/bin/make_arch_config -c
/var/opt/ignite/recovery/2013-07-13,13:25/archive_cfg -g
/var/opt/ignite/recovery/2013-07-13,13:25/flist -n 2013-07-13,13:25 -r
64 -d Recovery\ Archive -t -i 1 -m t
* Saving the information about archive to
/var/opt/ignite/recovery/previews
* Creating The Tape Archive
* Checking configuration file for Syntax
Adding /opt/ignite/Version file to LIF.
* Writing boot LIF to tape
48214+0 records in
48214+0 records out
* Complete writing boot LIF onto tape.
* /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/0mn -t n -s
local -n 2013-07-13,13:25 -m t -w
/var/opt/ignite/recovery/2013-07-13,13:25/recovery.log -u -R -g
/var/opt/ignite/recovery/2013-07-13,13:25/flist -a 16449810
* Preparing to create a system archive.
* Archiving contents of SIAPP2 via tar image to local device/dev/rmt/0mn.
pax: write : I/O error
pax: A write error has occurred.
WARNING: The pax command returned a non-zero exit status (exit status 1).
WARNING: The pax command returned a non-zero exit status (exit status 1).
* Creation of system archive complete.
NOTE: Could not read the /etc/resolv.conf file.
* Cleaning up old configuration file directories
======= 07/13/13 13:56:40 EAT make_tape_recovery completed with warnings
应该不是磁带或磁带机问题，今天下午换了4盘磁带，2台磁带机都是这样。还有这个不应该是备份好了吧，总共就用了30分钟左右，试了几次都这样不过更快，大概就10几分钟。 |
|
免费注册
发表于 2013-07-13 20:48
