- 论坛徽章:
- 0
|
10可用积分
Its current value is CRITICAL(5).
Event data from monitor:
Event Time..........: Sun Dec 8 05:46:54 2013
Severity............: CRITICAL
Monitor.............: disk_em
Event #.............: 3
System..............: tddb1
Summary:
Disk at hardware path 0/4/1/0.0.0.0.0 : Drive is not responding.
Description of Error:
As part of the polling functionality, the monitor periodically requests
data from the device. The monitor's request of Test Unit Ready command
failed.
Probable Cause / Recommended Action:
The I/O request that the monitor made to this device failed because the
device timed-out. Check cables, power supply, ensure the drive is power
ON, and if needed contact your HP support representative.
Additional Event Data:
System IP Address...: 10.21.48.11
Event Id............: 0x52a3974e00000000
Monitor Version.....: B.01.01
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_disk_em.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: ia64 hp server rx6600
OS Version......................: B.11.23
STM Version.....................: C.60.00
EMS Version.....................: A.04.20
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/disk_em.htm#3
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-
Component Data:
Physical Device Path...: 0/4/1/0.0.0.0.0
Device Class...........: Disk
Inquiry Vendor ID......: HP
Inquiry Product ID.....: DG146BB976
Firmware Version.......: HPDC
Serial Number..........: 3NM564DJ000098374FTU
Product/Device Identification Information:
Logger ID.........: disc30; sdisk
Product Identifier: Disk
Product Qualifier.: HP DG146BB976
SCSI Target ID....: 0x00
SCSI LUN..........: 0x00
SCSI Command Data Block: (not present in log record)
Hardware Status: (not present in log record).
SCSI Sense Data: (not present in log record)
>---------- End Event Monitoring Service Event Notification ----------<
#
这个服务器没有做镜像,现在报了这个故障机器还在运行,指示灯也都正常,但是硬盘有不停似乎在重启的声音,业务也在运行,现在能不能用磁带机做这快盘的备份,会不会突然down掉影响业务,求高手解答啊! |
最佳答案
查看完整内容
1. 如果0/4/1/0.0.0.0.0在vg00上的话,先dd全盘读一下确认是否有问题,有的话最好提前更换;2. 如果6月份那次备份之后没做过配置更改的话,可以手工切换业务到备机上(没法保证现在切换过程中是否有问题,当初在配置上线之前的时候一般都需要做测试的,你担心的话可以抽一个业务不忙的时候来做),然后更换硬盘,重新回灌6月份的系统数据试试。之后确认集群配置等相应文件都还在的话,抽时间再切换回来看看~
|