如何监控DELL 服务器raid状态

lth0721

前段时间一台服务器硬盘无故死机起不来了，后来发现是硬盘坏了，本身是做了RAID 1的，本以为拿掉一块硬盘就能恢复了，岂料另一块也是半死不活.
于是网上寻找raid监控工具..
摸索半天才发现这个硬件raid还分型号，不是一个工具就能监控所有的raid卡..
暂时找到比较靠谱的工具是MegaCli和lsiutil
按理说已经能够监控Dell使用的所有raid卡
无耐发现部分机器两个工具都不奏效，特来询问各位帮助
下面是运行两个工具的结果
./lsiutil

LSI Logic MPT Configuration Utility, Version 1.56, March 19, 2008

0 MPT Ports found



./MegaCli64 -Pdlist -aALL
                                    

Exit Code: 0x00


硬件信息
lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation C202 Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
03:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 (rev 0a)



dmesg|grep -i raid
mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
scsi 0:1:0:0: RAID1: handle(0x004f), wwid(0x0135c2f8b8e55bfe), pd_count(2), type(SSP)
device-mapper: dm-raid45: initialized v0.2594l
md: Autodetecting RAID arrays.

lth0721

q1208c 发表于 2014-06-10 07:57
根本没有RAID卡, 只是一块SAS卡.

请问这个SAS卡怎么能监控呢？

lth0721

回复 5# q1208c


没有这个软件MageSAS 和MegaSAS都没搜索到
Megacli这个就是在他的官网上面下载的
其它几台机器偶可以监控比如（LSI Logic / Symbios Logic SAS1068E），唯独LSI Logic / Symbios Logic SAS2008这个型号的获取不到数据。。

lth0721

不好意思来晚了啊，最近一直忙其它事情，谢谢各位帮助