- 论坛徽章:
- 1
|
[root@localhost ~]# fdisk -l
Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a2100
Device Boot Start End Blocks Id System
/dev/sda1 * 1 39 307200 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 39 2093 16501760 83 Linux
/dev/sda3 2093 2610 4154841 5 Extended
/dev/sda5 2093 2106 106429+ 83 Linux
/dev/sda6 2107 2120 112423+ 83 Linux
/dev/sda7 2121 2134 112423+ 83 Linux
/dev/sda8 2135 2148 112423+ 83 Linux
/dev/sda9 2149 2162 112423+ 83 Linux
/dev/sda10 2163 2424 2104483+ 83 Linux
用fdisk创建了上面的分区,并已w,partprobe,然后,mdadm是提示mdadm: device /dev/sda5 not suitable for any style of array,然后查看/dev得到如下结果,没有sda5-10.
[root@localhost ~]# ls /dev|grep sda
sda
sda1
sda2
sda3
[root@localhost ~]# mkfs -t ext4 /dev/sda5
mke2fs 1.41.12 (17-May-2010)
Could not stat /dev/sda5 --- No such file or directory
The device apparently does not exist; did you specify it correctly?
咋回事呢?谢谢
|
|