操作系统升成64位后，启动HA，系统关机！

xamhd

系统环境为AIX5L，硬件是p670
操作系统升成64位后，启动HA，系统关机！
Mar 31 2005 20:15:49Starting execution of /usr/sbin/cluster/etc/rc.cluster
with parameters : -boot -N -b -i
0513-029 The portmap Subsystem is already active.
Multiple instances are not supported.
0513-029 The inetd Subsystem is already active.
Multiple instances are not supported.
Error 109 from sysconfig LOAD
sysconfig SINGLELOAD: The system call does not exist on this system.
exec(): 0509-036 Cannot load program dms_entry because of the following errors:
0509-130 Symbol resolution failed for dms_entry because:
0509-136   Symbol dead_man_sw (number is not exported from
dependent module /unix.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Mar 31 2005 20:16:11Checking for srcmstr active...Mar 31 2005 20:16:11complete.
237728-  0:00 syslogd
Mar 31 2005 20:16:12
/usr/sbin/cluster/utilities/clstart : called with flags -sm

0513-059 The clstrmgr Subsystem has been started. Subsystem PID is 327922.

tumor

是不是ln 做反了?

xamhd

是IBM的工程师做的！

yanbing

hacmp的某些版本不支持64bit。你的描述不够详细啊！
aix版本，hacmp版本。
32bit正常吗？

xamhd

目前环境：
    操作系统：AIX5.1-06 32bit kernel
    HA版本：4.5 standard版
升级后环境：
    操作系统：AIX5.1-06 64bit kernel
    HA版本：4.5 ES版
是我原来的HA版本不支持！

yanbing

ok，搞定就好！祝贺你！

junnygl

64位能改回到32位吗？