- 论坛徽章:
- 0
|
Condition Work Screen - Help
Use this display to specify condition indicators for fields and
their attributes that appear on the Design Image work screen. You
can also specify that fields from a database file are to be
reference fields, and you can specify if fields listed on the bottom
line of the Design Image work screen are shown one field at a time
(single-field mode) or several fields at a time (multiple-field
mode).
Record
The name of the record you are working with.
Activate indicators
Type Y (Yes) to check conditions before selecting the fields or
constants to display on the Design Image work screen. If you leave
this prompt blank, all fields and constants that can be displayed
appear on the work screen.
Note: You must type Y. If you do not, the entry will not be
used.
Indicators to be turned ON
Type condition indicators (a two-digit number between 1 and 99) for
the fields and constants on the Design Image work screen associated
with the record you are working with. You can specify up to 30
condition indicators. The fields and their attributes that are
conditioned by the indicators will appear on the work screen.
To condition off an indicator, do not include it in the list.
Indicators to condition all new fields and attributes
Type condition indicators for new fields, their attributes, and new
constants that you are adding to the Design Image work screen. Type
up to three 2-digit numbers (between 1 and 99). Precede the number
with N to have a Not condition. Precede the number with + to see
the Select Indicators display when you press Enter.
Show indicator setting for field
Type the name of a field currently on the Design Image work screen
to display the condition indicator setting of that field. SDA
displays the condition indicators that are turned on in the
Indicators to be turned ON prompt. You can use the displayed
condition indicator setting to set condition indicators on the work
screen.
Delete all fields on bottom line
Type Y (Yes) to remove all fields from the bottom row of the Design
Image work screen.
Note: You must type Y. If you do not, the entry will not be
used.
Reference database fields
Type Y (Yes) to specify that all fields from a database file that
you place on the Design Image work screen are reference fields. SDA
creates a REFFLD keyword if you add the field to the record you are
designing on the work screen. If you clear the prompt, the fields
will not be reference fields.
Note: You must type Y. If you do not, the entry will not be
used.
Display in single field mode
Type Y (Yes) to display the field length and column on the Design
Image work screen; however, you can only place one field at a time
on the work screen. If you leave the prompt blank, you can place up
to nine fields on the bottom row of the Design Image work screen at
a time.
Note: You must type Y. If you do not, the entry will not be
used.
Function keys
F1=Help
Press F1 to see online help information about this display.
F3=Exit
Press F3 to exit from the current function without saving your
work.
F12=Cancel
Press F12 to display the previous menu or display and save your
work.
Note: Anything you have typed since last pressing Enter
will NOT be processed.
配置Design Image work screen?? |
|