- 论坛徽章:
- 0
|
请教两个配置方面的问题？
我已经按照上面的步骤做的，共享内存置67108864，配置后，还报错误！
我把我的装配过程说一下：
我的电脑配置：PIII733，128MB SDRAM，ST 40G ,网卡,RTL8319,安装UNIX 5.05.
硬盘分为四个区:
第一次安装，硬盘分为 1. 65000（约2G) 2. 65000（约2G) 3. 65000（约2G) 4.剩余的盘为一个区。在第二分区上
建设备master 1000M,安装sybase 11.3,进行配置sybinit.
A． 配置Sybase Server
1． Port: 5000
2． Master device: /dev/rmaster
3． 5->;20; 1->;20
4． …
5． …
6． …
7． ->;cp850
8． …
9． …
配置成功，后由于master分配小了，我又重新安装sco unix 5.0.5,硬盘分区也重新划分，如下：
1.4G
2.6G
3.6G
4.剩余的盘为一个区。
master 分配 2000M
安装sybase 11.3,进行配置后,报错。提示：Failed to boot server 'SYBASE'
请问：1.安装sybase与硬盘分区大小有关吗？
2.配置sybinit与master大小有关吗？
3.除sco unix重装，硬盘重分，msater重分，其他设置同第一次一样（成功那次），不知这次为何不行？
以下是配置时的日志和错误提示，请高手解答！！！
日志log0701
07/01/103 10:43:48 PM Sybinit/11.0.3/P/SCO/SCO_SV r3.2v5.0.2/2/OPT/Fri Jul 18
20:17:11 PDT 1997
07/01/103 10:43:48 PM Confidential property of Sybase, Inc. (c) Copyright Sybase Inc.
1987, 1997. All rights reserved. Use, duplication, or disclosure by
the United States Government is subject to restrictions as set forth
in FAR subparagraphs 52.227-19 (a)-(d) for civilian agency
contracts and DFARS 252.227-7013 (c)(1)(ii) for Department of
Defense contracts. Sybase reserves all unpublished rights under
the copyright laws of the United States. Sybase, Inc. 6475 Christie
Avenue, Emeryville, CA 94608 USA.
07/01/103 10:43:48 PM BEGIN ENVIRONMENT INFORMATION
USER ENVIRONMENT
----------------------------------------
user name: sybase
current directory: /usr/sybase/install
character set: iso_1
language: us_english
sybinit release directory: /usr/sybase
working release directory: /usr/sybase
07/01/103 10:43:48 PM END ENVIRONMENT INFORMATION
07/01/103 10:45:09 PM Running task: create the master device.
07/01/103 10:45:10 PM Calling the shell with '/usr/sybase/bin/buildmaster
-d/dev/rmaster -s25600 >; /usr/sybase/init/logs/tmp 2>;&1 '.
07/01/103 10:45:10 PM Building the master device
07/01/103 10:45:12 PM Done
07/01/103 10:45:12 PM Begin output from 'buildmaster':
Master device: /dev/rmaster
writing configuration area
writing the MASTER database
writing the MODEL database
writing allocation pages for remaining 45 MB, (23040 pages)
2 MB
4 MB
6 MB
8 MB
10 MB
12 MB
14 MB
16 MB
18 MB
20 MB
22 MB
24 MB
26 MB
28 MB
30 MB
32 MB
34 MB
36 MB
38 MB
40 MB
42 MB
44 MB
45 MB Buildmaster complete
07/01/103 10:45:12 PM End output from 'buildmaster'.
07/01/103 10:45:12 PM Task succeeded: create the master device.
07/01/103 10:45:12 PM Running task: update the SQL Server runserver file.
07/01/103 10:45:13 PM Task succeeded: update the SQL Server runserver file.
07/01/103 10:45:14 PM Running task: boot the SQL Server.
07/01/103 10:45:14 PM Calling the shell with '/usr/sybase/install/RUN_SYBASE >;
/usr/sybase/init/logs/tmp 2>;&1 '.
07/01/103 10:45:15 PM waiting for server 'SYBASE' to boot...
07/01/103 10:45:21 PM SERVER ERROR: Failed to boot server 'SYBASE'.
07/01/103 10:45:22 PM Task failed: boot the SQL Server. Terminating configuration.
07/01/103 10:45:22 PM Configuration failed.
07/01/103 10:45:27 PM Exiting.
07/01/103 10:45:27 PM The log file for this session is
'/usr/sybase/init/logs/log0701.001'.
07/01/103 10:45:27 PM Log close.
错误日志errorlog
00:03/07/01 22:45:14.11 kernel Using config area from primary master device.
00:03/07/01 22:45:14.11 kernel Warning: Using default file '/usr/sybase/SYBASE.cfg' since a configuration file was not specified. Specify a configuration file name in the RUNSERVER file to avoid this message.
00:03/07/01 22:45:14.14 kernel Using 11000 file descriptors.
00:03/07/01 22:45:14.14 kernel ulinitspinlock: allocate mutex lock failed
|
|
免费注册
发表于 2003-06-30 21:50
