求救：HP RP3410系统无法安装！

jecrry

---- Main Menu ---------------------------------------------------------------

     Command                           Description
     -------                           -----------
     BOot [PRI|ALT|<path>]             Boot from specified path
     PAth [PRI|ALT] [<path>]           Display or modify a path
     SEArch [DIsplay|IPL] [<path>]     Search for boot devices

     COnfiguration menu                Displays or sets boot values
     INformation menu                  Displays hardware information
     SERvice menu                      Displays service commands

     DIsplay                           Redisplay the current menu
     HElp [<menu>|<command>]           Display help for menu or command
     RESET                             Restart the system
----
Main Menu: Enter command or menu > sea

Searching for potential boot device(s)
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).


                                                                           IODC
   Path#  Device Path (dec)  Device Path (mnem)  Device Type               Rev
   -----  -----------------  ------------------  -----------               ----
   P0     0/0/2/0.0          ide.0               Random access media       1

   P1     0/1/1/0.0          intscsia.0          Random access media       1

   P2     0/1/1/1.2          intscsib.2          Random access media       1

   P3     0/3/1/0/4/0.8                          Random access media       13

   P4     0/3/1/0/4/1.8                          Random access media       13

   P5     0/4/1/0/4/0.8                          Random access media       13

   P6     0/4/1/0/4/1.8                          Random access media       13



Main Menu: Enter command or menu > bo p0
Interact with IPL (Y, N, or Cancel)?> n

Booting...
Boot IO Dependent Code (IODC) revision 1


HARD Booted.

ISL Revision A.00.43  Apr 12, 2000

ISL booting  hpux (;0):INSTALL

Boot
: disk(0/0/2/0.0.0.0.0.0.0;0):WINSTALL
11751424 + 1970264 + 2631464 start 0x200d68




alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000.
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: nfs3_link(): File system was registered at index 4.
NOTICE: autofs_link(): File system was registered at index 6.
NOTICE: cachefs_link(): File system was registered at index 7.
igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
igelan1: INITIALIZING HP AB465-60001 PCI/PCI-X 1000Base-T 2-port 2Gb FC/2-port 1
000B-T Combo Adapter at hardware path 0/3/1/0/6/0
igelan2: INITIALIZING HP AB465-60001 PCI/PCI-X 1000Base-T 2-port 2Gb FC/2-port 1
000B-T Combo Adapter at hardware path 0/3/1/0/6/1
igelan3: INITIALIZING HP AB465-60001 PCI/PCI-X 1000Base-T 2-port 2Gb FC/2-port 1
000B-T Combo Adapter at hardware path 0/4/1/0/6/0
igelan4: INITIALIZING HP AB465-60001 PCI/PCI-X 1000Base-T 2-port 2Gb FC/2-port 1
000B-T Combo Adapter at hardware path 0/4/1/0/6/1

    System Console is on the Built-In Serial Interface
    Swap device table:  (start & size given in 512-byte blocks)
        entry 0 - auto-configured on root device; ignored - no room
WARNING: no swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured.  Dump is disabled.
Starting the STREAMS daemons-phase 1
Create STCP device files
Starting the STREAMS daemons-phase 2
          $Revision: vmunix:    vw: -proj    selectors: CUPI80_BL2000_1108 -c 'V
w for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108'  Wed
Nov  8 19:24:56 PST 2000 $
Memory Information:
    physical page size = 4096 bytes, logical page size = 4096 bytes
    Physical: 2095104 Kbytes, lockable: 1542980 Kbytes, available: 1791536 Kbyte
s

=======  03/02/08 02:18:44 EST  HP-UX Installation Initialization. (Sun Mar 02
         02:18:44 EST 200
         @(#) Ignite-UX Revision C.6.1.44
         @(#) install/init (opt) $Revision: 10.303 $
       * Scanning system for IO devices...
       * Querying disk device: 0/1/1/0.0.0 ...
       * Querying disk device: 0/1/1/1.2.0 ...
       * Setting keyboard language.
   [   ]  Advanced Installation (recommended for disk and filesystem management)
   [ * ]  Advanced Installation (recommended for disk and filesystem management)
       * Using client directory: /var/opt/ignite/clients/0x00306E4B3286

       * Checking configuration for consistency...

       * Loading configuration user interface, please wait...
trap type 15, pcsq.pcoq = 0.38590, isr.ior = 859a820.785bc018



Firmware Version  46.34

Duplex Console IO Dependent Code (IODC) revision 1



Stored message buffer up to panic:
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: nfs3_link(): File system was registered at index 4.
NOTICE: autofs_link(): File system was registered at index 6.
NOTICE: cachefs_link(): File system was registered at index 7.
0 sba
0/0 lba
0/0/1/0 hcd
0/0/1/0.1 hub
0/0/1/1 hcd
0/0/1/1.1 hub
0/0/1/2 ehci
0/0/2/0 side_ba
0/0/2/0.0 side
0/0/2/0.0.0 tgt
0/0/2/0.0.0.0 sdisk
0/0/2/0.0.7 tgt
0/0/2/0.0.7.0 sctl
0/0/2/0.1 side
0/0/2/0.1.7 tgt
0/0/2/0.1.7.0 sctl
0/1 lba
c8xx BUS: 2 SCSI C1010 Ultra160 Wide LVD  assigned CPU: 0
0/1/1/0 c8xx
0/1/1/0.0 tgt
0/1/1/0.0.0 sdisk
0/1/1/0.7 tgt
0/1/1/0.7.0 sctl
c8xx BUS: 3 SCSI C1010 Ultra160 Wide LVD  assigned CPU: 1
0/1/1/1 c8xx
0/1/1/1.2 tgt
0/1/1/1.2.0 sdisk
0/1/1/1.7 tgt
0/1/1/1.7.0 sctl
0/1/2/0 igelan
0/2 lba
0/3 lba
0/3/1/0 PCItoPCI
fcd: Claimed 2Gb FC port on Combo HBA at 0/3/1/0/4/0
0/3/1/0/4/0 fcd
fcd: Claimed 2Gb FC port on Combo HBA at 0/3/1/0/4/1
0/3/1/0/4/1 fcd
0/3/1/0/6/0 igelan
0/3/1/0/6/1 igelan
0/4 lba
0/4/1/0 PCItoPCI
fcd at 0/4/1/0/4/0: Unsupported ROM id 85 or 138
fcd: at 0/4/1/0/4/0 rombase unmapped successfully
fcd at 0/4/1/0/4/1: Unsupported ROM id 85 or 138
fcd: at 0/4/1/0/4/1 rombase unmapped successfully
0/4/1/0/6/0 igelan
0/4/1/0/6/1 igelan
0/6 lba
0/7 lba
0/7/1/0 asio0
0/7/1/1 asio0
8 memory
16 ipmi
128 processor
129 processor
igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
igelan1: INITIALIZING HP AB465-60001 PCI/PCI-X 1000Base-T 2-port 2Gb FC/2-port 1
000B-T Combo Adapter at hardware path 0/3/1/0/6/0
igelan2: INITIALIZING HP AB465-60001 PCI/PCI-X 1000Base-T 2-port 2Gb FC/2-port 1
000B-T Combo Adapter at hardware path 0/3/1/0/6/1
igelan3: INITIALIZING HP AB465-60001 PCI/PCI-X 1000Base-T 2-port 2Gb FC/2-port 1
000B-T Combo Adapter at hardware path 0/4/1/0/6/0
igelan4: INITIALIZING HP AB465-60001 PCI/PCI-X 1000Base-T 2-port 2Gb FC/2-port 1
000B-T Combo Adapter at hardware path 0/4/1/0/6/1

    System Console is on the Built-In Serial Interface
    Swap device table:  (start & size given in 512-byte blocks)
        entry 0 - auto-configured on root device; ignored - no room
WARNING: no swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured.  Dump is disabled.
Starting the STREAMS daemons-phase 1
Create STCP device files
Starting the STREAMS daemons-phase 2
          $Revision: vmunix:    vw: -proj    selectors: CUPI80_BL2000_1108 -c 'V
w for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108'  Wed
Nov  8 19:24:56 PST 2000 $
Memory Information:
    physical page size = 4096 bytes, logical page size = 4096 bytes
    Physical: 2095104 Kbytes, lockable: 1542980 Kbytes, available: 1791536 Kbyte
s

fcd at 0/4/1/0/4/0: Unsupported ROM id 85 or 138
fcd: at 0/4/1/0/4/0 rombase unmapped successfully
fcd at 0/4/1/0/4/1: Unsupported ROM id 85 or 138
fcd: at 0/4/1/0/4/1 rombase unmapped successfully
WARNING: modpath: DLKM is not initialized
WARNING: modpath: DLKM is not initialized
WARNING: modpath: DLKM is not initialized
WARNING: modpath: DLKM is not initialized
WARNING: modpath: DLKM is not initialized
WARNING: modpath: DLKM is not initialized
WARNING: modpath: DLKM is not initialized
WARNING: modpath: DLKM is not initialized
trap type 15, pcsq.pcoq = 0.38590, isr.ior = 859a820.785bc018

System Panic:

linkstamp:          Wed Nov 3 19:30:14 MST 2004
_release_version:   @(#)      $Revision: vmunix:    vw: -proj    selectors: CUPI
80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI8
0_BL2000_1108'  Wed Nov  8 19:24:56 PST 2000 $
panic: check_caught_trap: Caught trap was not ours

PC-Offset Stack Trace (read across, top of stack is 1st):
  0x00211e30  0x002668c0  0x002751d8
  0x00150228  0x00150400  0x0013e740
  0x001264ec  0x003017b8  0x00129f70
  0x0014f3dc  0x0003375c
End Of Stack

sync'ing disks (1 buffer to flush): 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (1
buffer to flush): 1
1 buffer not flushed
1 buffer still dirty



*** A system crash has occurred.  (See the above messages for details.)
*** The system is now preparing to

ERROR:  No dump space is configured.  Physical memory will not be dumped.
到这里就重起！

请各位大虾指点指点，为什么系统安装不上去？

jecrry

在线等！

zlg88

找个终端或是用Secure CRT串口连接上设成vt100

Pi_Gar

以上所有信息中，关键词为：Stored message buffer up to panic:和A system crash has occurred。

可能原因: SCSI  ID未改 或有硬件损坏。

1.把你的scsi线都拔掉再尝试一次。
2.如果不行，把所有的PCI卡都拔掉再尝试一次。

还不行，你应该报修，fw为46.34的3440肯定是没过保的。

泡方便面

你是用光盘装的，还是用磁带？你内存多大，根盘多大，是否做了raid。

cq_hong

保修吧