跪求：cluster节点1重启后，节点2任何网口都telnet ,ftp不了

oldhero

各位大哥，小弟现在外地出差给客户2 台T5220+6140阵列，做双机。。
solaris10+sun cluster3.1

我把系统装好，打上补丁后，装好双机并且配置好了，做scswitch测试
都没有任何的问题就是在

cluster的节点1重启后，节点2任何网口都telnet ,ftp不了，但是可以PING通，逻辑IP跟实际IP都是一样的。

T5220的网卡是e1000g的。
心跳是back-to-back的。


    Is "e1000g2" an Ethernet adapter (yes/no) [yes]?  



    Is "e1000g2" an Infiniband adapter (yes/no) [yes]?  no



    The "dlpi" transport type will be set for this cluster.



    What is the name of the second cluster transport adapter [e1000g3]?  

Is "e1000g2" an Infiniband adapter (yes/no) [yes]?  这里是要选yes 还是NO？？
二节点上的：
What is the name of the first cluster transport adapter?  e1000g2

    All transport adapters support the "dlpi" transport type. Ethernet
    and Infiniband adapters are supported only with the "dlpi" transport;
    however, other adapter types may support other types of transport.
    For more information on which transports are supported with which
    adapters, please refer to the scconf_transp_adap family of man pages
    (scconf_transp_adap_hme(1M), ...).

    Is "e1000g2" an Ethernet adapter (yes/no) [no]?  yes

    Is "e1000g2" an Infiniband adapter (yes/no) [no]?  

    The "dlpi" transport type will be set for this cluster.

    Name of adapter on "eomsdb1" to which "e1000g2" is connected?  e1000g2

    What is the name of the second cluster transport adapter?  e1000g3

    Name of adapter on "eomsdb1" to which "e1000g3" is connected?  e1000g3

我怀疑是不是这步做错了呢，Name of adapter on "eomsdb1" to which "e1000g2" is connected?    这里是填e1000g2还是填switch1呢？

冒似是bug但是搜了下也没有看到具体的描述和补丁说明。
帮帮忙客户催着要系统要上线，公司催着回去交差。。急急急！！！！！！！
大家帮帮忙。感激不尽。。

在线等了。。。。

briangao

我怀疑是不是这步做错了呢，Name of adapter on "eomsdb1" to which "e1000g2" is connected?    这里是填e1000g2还是填switch1呢？

e1000g2

telnet and ftp are disabled by default in Solaris 10. It has nothing to do with the Sun cluster interconnect you were configuring.

To verify telnet and ftp are disabled:

svcs -a|grep telnet
disabled       17:28:35 svc:/network/telnet:default

svcs -a|grep ftp
disabled       17:28:35 svc:/network/ftp:default

To enable:

svcadm enable svc:/network/telnet:default
svcadm enable svc:/network/ftp:default