netra20启动时报错，救命！！

fayewei

WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
configuring IPv4 interfaces: eri0 hme0.
Hostname: qzpaswg-1
The / file system (/dev/md/rdsk/d10) is being checked.
Can't stat /dev/md/rdsk/d10
/dev/md/rdsk/d10: CAN'T CHECK FILE SYSTEM.
/dev/md/rdsk/d10: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.

WARNING - Unable to repair the / filesystem. Run fsck
manually (fsck -F ufs /dev/md/rdsk/d10). Exit the shell when
done to continue the boot process.


Type control-d to proceed with normal startup,
(or give root password for system maintenance): resuming system initialization
1mount: /dev/md/dsk/d10 或者 /， 没有这样的文件或者目录
打开 /etc/coreadm.conf 失败syseventd: Unable to open daemon lock file '/etc/sysevent/syseventd_lock': '只读文件系统'
INIT: Cannot create /var/adm/utmpx

INIT: failed write of utmpx entry:"  "

INIT: failed write of utmpx entry:"  "

INIT: SINGLE USER MODE

Type control-d to proceed with normal startup,
(or give root password for system maintenance): trLogin incorrect

Type control-d to proceed with normal startup,

filtercai

提示里面不是说了嘛，让你手工运行fsck检查d10
fsck -F ufs /dev/md/rdsk/d10，最好加个-y

race

/dev/md/rdsk/d10这个安装的是根区，有错误了，系统没有自动修复好，引起以后的var等文件系统挂不上去,按提示输入超级口令 执行fsck -y等完成之后，输入exit即可

fayewei

netra20两块盘做的raid1，连着A1000。A1000中的9块盘做了2个RAID5，现在状态是单盘启动可以进入系统，用metastat可以识别到d30,d40(两个raid5)，但是无法挂载

fayewei

没那么简单的，我作fsck根本不让做，df -k什么都没有
root@qzpaswg-1 # fsck -y
Can't stat /dev/md/rdsk/d10
Can't stat /dev/md/rdsk/d30
Can't stat /dev/md/rdsk/d40
现在我从单盘启动了，format可以识别所有硬盘，metastat也可以看到raid5d的状态，但是为什么就是无法挂载呢？

[ 本帖最后由 fayewei 于 2008-4-17 14:32 编辑 ]

zufuqing5303

说的太模糊，没懂你什么意思