rp5430了主机启动不了，报错如下

messages

ＲＰ５４３０的主机，启动了到10中断时就不动了，前面板亮红灯，console进入ＧＳＰ看到错误提示如下：


************ EARLY BOOT VFP *************
End of early boot detected
*****************************************

Firmware Version  43.22

Duplex Console IO Dependent Code (IODC) revision 1

------------------------------------------------------------------------------
   (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------

  Processor   Speed            State           CoProcessor State  Cache Size
  Number                                       State              Inst    Data
  ---------  --------   ---------------------  -----------------  ------------
      0      875  MHz   Active                 Functional         750 KB 1.5 MB
      2      875  MHz   Idle                   Functional         750 KB 1.5 MB

  Central Bus Speed (in MHz)  :        133  
  Available Memory            :    8388608  KB
  Good Memory Required        :      31676  KB

   Primary boot path:    0/0/1/1.2           
   Alternate boot path:  0/0/2/0.2           
   Console path:         0/0/4/1.0           
   Keyboard path:        0/0/4/0.0           


Processor is booting from first available device.

To discontinue, press any key within 10 seconds.

10 seconds expired.
Proceeding...

Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1

IPL error: bad LIF magic.
.... FAILED.


Trying Alternate Boot Path
--------------------------

Failed to initialize.

ENTRY_INIT
Status = -7

00000000 FFFFFFF9 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000012 00000000 00000000 00000000 00000000
00000000 454E4841 00000000 00000000 00000000 00000000 00000000 454E4841
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000200 00000000 00000000 00000000 00000000 00000000 00000000

Failed to initialize.

.... FAILED.


Terminating selection process.
No boot device found.


---- Main Menu ----------------------------------------
************* SYSTEM ALERT **************
SYSTEM NAME: rp5430
DATE: 05/05/2008 TIME: 23:56:46
ALERT LEVEL: 15 = Fatal hardware or configuration problem prevents operation

REASON FOR ALERT
SOURCE: 8 = I/O
SOURCE DETAIL: 6 = disk   SOURCE ID: 0
PROBLEM DETAIL: 3 = functional failure

LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER
       FLASH    FLASH         ON        ON         ON
LED State: Boot Failed.  Running non-OS code.  Non-critical error detected.
Check Chassis and Console Logs for error messages.

0x000000F386001480 00000000 00000000 - type  0 = Data Field Unused
0x580008F386001480 00006C04 0517382E - type 11 = Timestamp 05/05/2008 23:56:46
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:Timeout!
*****************************************

在这里就停住了，进入了menu＞
但是只要你boot系统就可以正常进入．
问题在哪呢？
是不是要修改主机为自动启动，但是我看了co-auto项却全部是on的.
ＧＳＰ报错如下：
Log Entry #   0 :
SYSTEM NAME: rp5430
DATE: 05/05/2008 TIME: 23:56:46
ALERT LEVEL: 15 = Fatal hardware or configuration problem prevents operation

SOURCE: 8 = I/O
SOURCE DETAIL: 6 = disk   SOURCE ID: 0
PROBLEM DETAIL: 3 = functional failure

CALLER ACTIVITY: 1 = test   STATUS: 0
CALLER SUBACTIVITY: 48 = implementation dependent
REPORTING ENTITY TYPE: 0 = system firmware   REPORTING ENTITY ID: 00

0x000000F386001480 00000000 00000000 type  0 = Data Field Unused
0x580008F386001480 00006C04 0517382E type 11 = Timestamp 05/05/2008 23:56:46

以下是提示sytem firmware出错吗？
REPORTING ENTITY TYPE: 0 = system firmware   REPORTING ENTITY ID: 00

messages

进入操作系统后直接reboot就没问题，但是shutdown -h0
gsp> pc off
gsp>pc on 就会报以上的错误

五“宅”一生

LIF启动文件坏了，到维护模式下修复看看。

messages

刚刚重装了操作系统也报那个错

五“宅”一生

不会吧。是不是你的安装介质出了问题。换个看看。

messages

安装的介质有问题?这个倒没想过,折腾了两天了,重装了3次了,也换了槽位,换了硬盘.
上网查了好多资料IPL error: bad LIF magic.的错误大家都是说用光盘来恢复就可以,但是奇怪的问题是我用光盘恢复会报错.
                  HP-UX Recovery MENU

        Select one of the following:
        a.  Mount the root disk and exit to a shell only.
        b.  Recover the bootlif/os partitions.
        c.  Replace the kernel on the root file system.
        d.  Both Options: b and c
        v.  Read information about LVM Recovery (LVM.RECOVER)

        m.  Return to 'HP-UX Recovery Media Main Menu'.
        x.  Exit to the shell.

    Use this menu to select the level of recovery desired.

    Selection: b
Entering boot area repairing ....

/: write failed, file system is full
ERROR:   tar: ./sbin/mkboot: HELP - extract write error: No space left on
         device (errno = 2
/: file system full
NOTE:    Retrying loadfile command...


                         BOOTLIF PATH VERIFICATION
                                   MEN

     This menu must be used to determine the path to the bootlif (ISL, HPUX
     and the AUTO file).
     When the information is correct, select 'a'.

        INFORMATION to verify:
             Path to the bootlif is 0/0/2/0.2.0

        Select one of the following:
             a.  The above information is correct.
             b.  WRONG!!Prompt user for a new bootlif path.

             m.  Return to the 'HP-UX Recovery MENU.'
             x.  Exit to the shell.

Selection: a

*********** Installing bootlif  ***********

/duped_root/.kshrc: mkboot: cannot execute
\ mkboot failed.



         Mkboot failed to update the bootlif!!
         You will be returned to the HP-UX Recovery MENU

         <ress return to continue>

messages

换了一张光盘进行 Recover the bootlif/os partitions,还是一样,报同样的错,这张光盘安装了的系统在另一台主机上运行是正常的.
郁闷啊!!!
为什么系统执行reboot没有问题,但是执行shutdown -h 0,pc-off,pc-on就会出错呢.百思不得其解,高手帮忙啊..谢谢!
这个星期搞不定就惨了...

[ 本帖最后由 messages 于 2008-5-8 18:01 编辑 ]

五“宅”一生

是不是机器的硬件出了问题。或者真是firmware需要升级了。我觉得你需要咨询一下800。

levine

/: write failed, file system is full
怎么不看错误信息呢，/文件系统满了，很多事都干不了的。。。

messages

原帖由 levine 于 2008-5-9 22:18 发表
/: write failed, file system is full
怎么不看错误信息呢，/文件系统满了，很多事都干不了的。。。

/文件系统是37%.如下,刚刚重装的操作系统,不过我也不知道为什么用光盘启动做recorver时会提示 / is full
# bdf
Filesystem          kbytes    used   avail %used Mounted on
/dev/vg00/lvol3     262144   95320  165584   37% /
/dev/vg00/lvol1     314736   30856  252400   11% /stand
/dev/vg00/lvol8    4718592  293768 4390912    6% /var
/dev/vg00/lvol7    1310720  920232  387448   70% /usr
/dev/vg00/lvol4     262144    2368  257752    1% /tmp
/dev/vg00/lvol6    3211264 2270664  933288   71% /opt
/dev/vg00/lvol5      65536    2280   62776    4% /home
#
系统如果在menu>下键入boot是可以正常进入的,问题是在断电后重启才会出现bad lif的错误.
今天又找了另一张光盘进入安装后,出现的问题还是一样.

[ 本帖最后由 messages 于 2008-5-11 16:53 编辑 ]