b1000 hp-ux 11iv1 安装错误 -- 自己搞好了

hlf

信息

高手给看看那里的问题。 我机器的配置 1g内存 9GX2硬盘

=====================================================
Extending logical volume "vg00/lvol3" (/).
       * Extending logical volume "vg00/lvol4" (/tmp).
       * Extending logical volume "vg00/lvol5" (/home).
       * Extending logical volume "vg00/lvol6" (/opt).
DIAGNOSTIC SYSTEM WARNING:
   The diagnostic logging facility has started receiving excessive
   errors from the I/O subsystem.  I/O error entries will be lost
   until the cause of the excessive I/O logging is corrected.
   If the diaglogd daemon is not active, use the Daemon Startup command
   in stm to start it.
   If the diaglogd daemon is active, use the logtool utility in stm
   to determine which I/O subsystem is logging excessive errors.
       * Extending logical volume "vg00/lvol7" (/usr).
       * Extending logical volume "vg00/lvol8" (/var).
       * Making HFS filesystem for "/stand", (/dev/vg00/rlvol1).
       * Making VxFS filesystem for "/", (/dev/vg00/rlvol3).
       * Making VxFS filesystem for "/tmp", (/dev/vg00/rlvol4).
       * Making VxFS filesystem for "/home", (/dev/vg00/rlvol5).
       * Making VxFS filesystem for "/opt", (/dev/vg00/rlvol6).
       * Making VxFS filesystem for "/usr", (/dev/vg00/rlvol7).
       * Making VxFS filesystem for "/var", (/dev/vg00/rlvol.
msgcnt 1 vxfs: mesg 021: vx_fs_init - /dev/vg00/lvol4 file system validation failure
ERROR:   Could not mount VxFS "/dev/vg00/lvol4" at "/d_cfg_mnt_sb61/tmp": No
         space left on device (errno = 2.

         The configuration process has incurred an error, would you like
         to push a shell for debugging purposes? (y/[n]):

====================================================================

[ 本帖最后由 hlf 于 2008-6-2 21:40 编辑 ]

五“宅”一生

提示空间不足。你安装的时候仔细校验一下这些逻辑卷的大小。不要设置大了。

lzdydc

兄弟能否将你的HP-UX 11i v1给俺共享一份！

qing036

No
         space left on device   空间不够大?

levine

msgcnt 1 vxfs: mesg 021: vx_fs_init - /dev/vg00/lvol4 file system validation failure
文件系统验证失败，可能是硬盘有坏道。

levine

安装到另外一块硬盘上试下吧，刚进入安装界面时可选择哪块硬盘作为根盘。

[ 本帖最后由 levine 于 2008-5-20 23:09 编辑 ]

hlf

搞了很久，自定义分区大小也不行，选另一块盘也不行，甚至每次报的错误都不一样 。

今天把数据线重新插了一下就OK了 。 11iV1安装还是挺简单的

安装盘是在电驴下的，可以用的 。需要的自己去下吧 。就那两张就行了 。

五“宅”一生

呵呵。这报错也不怎么准确。