将EMC CX300接入P570A

ggf0626

1、通过浏览器连接到SP
设置拨号连接，拨号未成功。报777错误。怀疑所使用的9针串口线不符，要求为null modem cable。
       通过Fluke网络测试仪器，监测两个SP网口的地址。分别为192.168.0.3和192.168.0.2（SPA）。连接到
http://192.168.0.3
，要求安装java plugin 1.4.1_01，要求输入用户名和密码，分别为admin和password。
       查看《navisphere manager 6.x administrator’s guide.pdf》，进行配置。






2、手工注册HBA卡
因为在P570A上没有安装AGENT。需要手工对HBA卡进行注册。
To Register a New Unregistered HBA
To register a new unregistered HBA, do the following:
1. From the Connectivity Status dialog box, click New to open the Create Initiator Record dialog box.
For a description of the properties in the dialog box, click Help.
2. In the Create Initiator Record dialog box, enter the HBA WWN (World Wide Name) and SP Port ID (0 or 1) for the new HBA.
3. Unless instructed otherwise, set Initiator Type to CLARiiON Open.
4. Enable or disable Array CommPath.
5. In Failover Mode, select the correct failover value.
6. Under This HBA Belongs to, click New Host, and then enter a valid Host Name and enter the IP Address for the host in which the new HBA resides.
7. Save your changes and close the dialog box to return to the Connectivity Status dialog box.

If you are not using failover software, set the storage-system failover properties as follows:
◆ Unless instructed otherwise, set Initiator Type to CLARiiON Open.
◆ Enable ArrayCommPath.
◆ Set Failover Mode to 0.



3、在Storage Groups中加入新的host
4、验证HBA卡连接情况
连接光纤，从SPA-1到P570 FCS1。在Connectivity Status查看对应HBA卡的Fibre Logged In属性。
5、其他信息
RAID Group的磁盘



本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/8970/showart_77493.html