- 论坛徽章:
- 0
|
CS/AIX的安装和配置
安装部分:
1、 以root用户登陆系统,运行smit命令;
2、 选择菜单项”Software Installation and Maintenance”
Ø “Install and Update Software”
Ø “Install Software”
3、在”INPUT device / directory for software”栏中输入安装程序所在目录;
4、在”SOFTWARE to install”栏上按F4,然后选择所有安装文件;
5、在”ACCEPT new license agreements?”栏上按F4,选择”yes”;
6、安装成功后相关的几个目录:/etc/sna/ 配置文件所在目录
/lib/sna/ 各种库文件所在目录
7、启动SNA服务命令,san start
配置部分:
1、 以root用户登陆系统,运行smit sna命令;
2、 选择菜单项”Configure SNA Resources”
Ø “Local Node Resources”
Ø “Node Definition”
3、 按如下所示配置结点信息
Node Definition
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Control Point alias [xfunds]
Description []
* Control Point name [APPN.XFUNDS]
APPN Support END_NODE
Node ID [07100000]
NM-API Style NORMAL
If BACK_LEVEL,
Queue NMVTs? NO
其中“APPN Support”选项在测试环境下可为END_NODE,在实际生产环境下应改为NETWORK_NODE,以与其它机器上的结点进行通讯。
4、 返回上一级菜单,选择菜单项”Connectivity”(搭建测试环境可省略这一步骤)
Ø “DLCs, Ports and Link Stations”
Ø “Add Connectivity Resources”
Ø “Add Ethernet Resource”
n “Add Ethernet DLC”
按如下所示配置DLC
Add Ethernet DLC
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* DLC name [FUNDSDLC]
Description []
Negotiable link stations supported? YES
Initially active? YES
Adapter Number [0]
Maximum number of SAPs on the DLC [16]
Ethernet type 802_3
n “Add Ethernet Port”
Add Ethernet Port
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Port name [FUNDSPT]
Description []
* DLC Name [FUNDSDLC]
Local SAP address [04]
Initially active? YES
Use HPR on implicit links? YES
Use HPR link level error recovery? NO
Implicit links to end nodes are uplinks? NO
Maximum BTU size allowed [1492]
Maximum number of active links allowed [255]
Implicit DSPU template []
Maximum number of I-frames outstanding [7]
Local link name []
XID retry count [2]
Frame retransmit (T1) timeout (1=500ms) [8]
Frame retransmit limit [2]
Receive ack (T2) timer (1=500ms) [1]
n “Add Ethernet Link Station”
Add Ethernet Link Station
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP] [Entry Fields]
* Link station name [FUNDSLIN]
Description []
* Port name [FUNDSPT]
Activation BY_ADMINISTRATOR
Independent LU Traffic:
Remote node Control Point name [FRONT]
Remote node type NETWORK_NODE
Dependent LU Traffic:
Downsteam PU services supplied NONE
If SNA Gateway or DLUR,
Downstream PU name []
If DLUR,
DLUS server name []
Local node id [07100000]
Remote node id [07100001]
Contact Information:
Remote node MAC address [00096b2e6f8c]
Remote node SAP address [04]
Advanced:
Maximum BTU size to be sent [1492]
Host type SNA
Request CP-CP sessions? YES
Use HPR? NO
Use HPR link-level error recovery? NO
TG number [0]
Solicit SSCP sessions? YES
Remote node is a network node server? NO
Link station role USE_PORT_DEFAULTS
Branch link type NONE
Reactivate link station after failure YES
Restart on normal deactivation NO
XID retry count [2]
Frame retransmit (T1) timer (1=500ms) [8]
Frame retry limit [2]
Receive ack (T2) timer (1=500ms) [1]
其中” Remote node Control Point name”,” Remote node type”,” Remote node id”,” Remote node MAC address”的具体参数由对方提供。查看MAC address可用lscfg –v命令
5、 返回上一级菜单,选择菜单项” LU 6.2 Configuration”
Ø LU 6.2
Ø Add Independent LU Type 6.2
按如下所示配置LU信息:
Add Independent LU Type 6.2
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* LU alias [TPLU1]
Security Access List name []
Description []
* LU name [TPLU1]
Support Syncpoint? NO
Additional LU properties NONE
如为测试环境再搭建另一个LU
Add Independent LU Type 6.2
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* LU alias [TPLU2]
Security Access List name []
Description []
* LU name [TPLU2]
Support Syncpoint? NO
Additional LU properties NONE
6、 返回上一级菜单,选择菜单项” LU 6.2 Configuration”
Ø LU 6.2 Mode
Ø Add Mode
按如下所示配置Mode信息
Add Mode
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Name [LOCMODE]
Description []
Session limits
Maximum number of sessions [32767]
Initial session limit [2]
Min con. winner sessions [1]
Min con. loser sessions [0]
Auto-activate sessions [0]
Receive pacing window
Initial [4]
Maximum [0]
Use default RU sizes? YES
If NO,
Maximum RU size upper limit [1024]
Maximum RU size lower limit [0]
COS name [#CONNECT]
7、 待以上配置都成功之后,启动SNA各类资源
具体步骤如下:smit sna
Ø Manage SNA Resources
Ø Start SNA Resources
n Start SNA
n Start Node
n Start an SNA DLC
n Start an SNA Port
n Start an SNA Link Station
本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/22208/showart_239071.html |
|