Installing VERITAS File System Software

gzkaka

From veritas official document:
Note Only a superuser can install and uninstall the VERITAS File System.
VERITAS Installation Menu
VERITAS products distributed by VERITAS have an automated installation and licensing
procedure that lets you install packages using an Installation Menu, or invoke installation
scripts from the command line. Alternatively, you can install VxFS using the pkgadd
command. The Getting Started Guide, included with the VERITAS product software discs,
provides information on using the Installation Menu. Review the Getting Started Guide
before installing VxFS.
Note The VERITAS Installation Menu and the install and uninstall scripts are not
available on the CD when you purchase the VERITAS File System through Sun
Microsystems.
Mounting the Software Disc
1. Log in as superuser.
2. Place the VERITAS software disc into a CD-ROM drive connected to your system.
Note There are multiple CDs in the product distribution from VERITAS. Read the disc
label for the location of VxFS.
3. If Solaris volume management software is running on your system, the CD
automatically mounts as /cdrom/cdrom0.
4. If Solaris volume management software is not available to mount the CD, you must
mount it manually. After inserting the CD, enter:
# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom
where c0t6d0s2 is the default address for the CD-ROM drive.
VxFS Installation
VxFS 4.0 runs on Solaris 7, 8, or 9. If you try to install it on any other Solaris version, the
pkgadd procedure will fail and display an error message.
Note You can no longer create or mount Version 1 or Version 2 disk layout file systems.
However, you can upgrade them to make them usable on VxFS 4.0 (see “Upgrading
VxFS Disk Layout Versions” on page 27).
The VRTSvxfs package contains binaries for all three of these Solaris OS versions.
Procedures built into this package determine the current OS version and install the
appropriate VxFS binaries. On Solaris 7, 8, and 9 systems, both the 32-bit and 64-bit VxFS
drivers are installed.
If you are upgrading VxFS from a previous version, go to “Upgrading VxFS Disk Layout
Versions” on page 27.
You can install VxFS using the VERITAS Installation Menu, using the installfs script,
or using the pkgadd command.
Installing VxFS Using the VERITAS Installation Menu
To start the Installation Menu, move to the cdrom0 directory and enter the installer
command:
# cd /cdrom/cdrom0
# ./installer
Installing VxFS Using the installfs Script
1. To install VRTSvxfs using installfs, move to the file_system directory:
# cd /cdrom/cdrom0/file_system
2. Run the VxFS installation script:
# ./installfs
VERITAS FILE SYSTEM 4.0 INSTALLATION PROGRAM
Copyright (c) 2003 VERITAS Software Corporation.
All rights reserved.
.
3. The installation program prompts for a system name. Enter one or more system
names, separated by a space, on which to install VxFS, for example, host1:
Enter the system names separated by spaces on which to
install VxFS: host1
Checking OS version on host1 ....................... SunOS 5.9
Checking VRTSvxfs package ...................... not installed
Initial system check completed successfully.
Press [Return] to continue:
VERITAS FILE SYSTEM 4.0 INSTALLATION PROGRAM
VERITAS Infrastructure package installation:
Installing VERITAS Infrastructure packages on host1:
Checking VRTScpi package ........................ not installed
Checking VRTSvlic package ....................... not installed
Checking file system space ........ required space is available
Installing VRTScpi 4.0.3 on host1 ........................ Done
Installing VRTSvlic 3.02.003 on host1 .................... Done
VERITAS Infrastructure packages installed successfully.
Press [Return] to continue:
4. The system responds with a prompt for the license key. Enter a valid key as shown in
the following example:
VxFS Licensing Verification:
Checking VxFS license key on host1 ................ not licensed
Enter a VxFS license key for host1:[?]ABCD-FGHI-JKLM-NOPQ-RSTU-V
Registering VERITAS Storage Foundation Enterprise PERMANENT key
on spd23
Do you want to enter another license key for host1? [y,n,q,?] (n)
VxFS licensing completed successfully.
Press [Return] to continue:
5. Next you can install the optional packages:
VERITAS FILE SYSTEM 4.0 INSTALLATION PROGRAM
installfs can install the following optional VxFS packages:
VRTSobgui VERITAS Enterprise Administrator
VRTStep VERITAS Task Provider
VRTSap VERITAS Action Provider
VRTSfsman VERITAS File System Manual Pages
VRTSfsdoc VERITAS File System Documentation
1) Install all of the optional packages
2) Install none of the optional packages
3) View package descriptions and select optional packages
Select the optional packages to be installed on
all systems? [1-3,q,?] (1) 1
VERITAS FILE SYSTEM 4.0 INSTALLATION PROGRAM
installfs will install the following VxFS packages:
VRTSperl VERITAS Perl 5.8.0 Redistribution
VRTSob VERITAS Enterprise Administrator Service
VRTSmuob VERITAS Enterprise Administrator Service Localized
Package
VRTSobgui VERITAS Enterprise Administrator
VRTSvxfs VERITAS File System
VRTStep VERITAS Task Provider
VRTSap VERITAS Action Provider
VRTSfspro VERITAS File System Management Services Provider
VRTSfppm VERITAS File Placement Policy Manager
VRTSfsman VERITAS File System Manual Pages
VRTSfsdoc VERITAS File System Documentation
Press [Return] to continue:
6. The program then checks the system and VxFS installation requirements and installs
the packages:
VERITAS FILE SYSTEM 4.0 INSTALLATION PROGRAM
Checking system installation requirements:
Checking VxFS installation requirements on host1:
Checking VRTSperl package ....... version 4.0.1 not installed
Checking VRTSob package ....................... not installed
Checking VRTSmuob package ..................... not installed
Checking VRTSobgui package .................... not installed
Checking VRTSvxfs package ..................... not installed
Checking VRTStep package ...................... not installed
Checking VRTSap package ....................... not installed
Checking VRTSfspro package .................... not installed
Checking VRTSfppm package ..................... not installed
Checking VRTSfsman package .................... not installed
Checking VRTSfsdoc package .................... not installed
Checking VERITAS patch 115209 ................. not installed
Checking VERITAS patch 115212 ................. not installed
Checking VERITAS patch 115210 ................. not installed
Checking file system space ...... required space is available
Checking vxsvc process ........................ not running
Checking vxportal driver ...................... not running
Checking fdd driver ........................... not running
Checking qlog driver .......................... not running
Checking vxfs driver ..................... vxfs module loaded
Unloading vxfs module on spd23 ........... vxfs unload failed
Because kernel driver modules failed to unload, you must reboot
your system after the installation has completed.
Installation requirement checks completed successfully.
Press [Return] to continue:
VERITAS FILE SYSTEM 4.0 INSTALLATION PROGRAM
Installing File System 4.0 on host1:
Installing VRTSperl 4.0.2 on spd23 .......... Done 1 of 14 steps
Installing VRTSob 3.2.514.0 on spd23 ........ Done 2 of 14 steps
Installing VRTSmuob 3.2.514.0 on spd23 ...... Done 3 of 14 steps
Installing VRTSobgui 3.2.514.0 on spd23 ..... Done 4 of 14 steps
Installing VRTSvxfs 4.0 on spd23 ............ Done 5 of 14 steps
Installing VRTStep 1.20.025 on spd23 ........ Done 6 of 14 steps
Installing VRTSap 2.00.015 on spd23 ......... Done 7 of 14 steps
Installing VRTSfspro 4.0 on spd23 ........... Done 8 of 14 steps
Installing VRTSfppm 4.0 on spd23 ............ Done 9 of 14 steps
Installing VRTSfsman 4.0 on spd23 ........... Done 10 of 14 steps
Installing VRTSfsdoc 4.0 on spd23 ........... Done 11 of 14 steps
Adding patch 115209-03 on spd23 ............. Done 12 of 14 steps
Adding patch 115212-04 on spd23 ............. Done 13 of 14 steps
Adding patch 115210-03 on spd23 ............. Done 14 of 14 steps
File System installation completed successfully.
Press [Return] to continue:
7. The program displays the following summary after completing the installation:
VERITAS FILE SYSTEM 4.0 INSTALLATION PROGRAM
Installation of File System 4.0 has completed successfully.
The installation summary is saved at:
/opt/VRTS/install/logs/installfs831145046.summary
The installfs log is saved at:
/opt/VRTS/install/logs/installfs831145046.log
The installation response file is saved at:
/opt/VRTS/install/logs/installfs831145046.response
Reboot all systems on which VxFS was installed or upgraded.
shutdown -y -i6 -g0
See the VERITAS File System Administrators Guide for information
on using VxFS.
where the time stamp “831145046” is August 31st at the time 14:50:46.
Note See “Loading and Unloading the File System Module” on page 30 for information
on starting VxFS without having to reboot.
8. Reboot the systems on which VxFS was installed. On every host, enter:
# shutdown -y -i6 -g0
9. Symbolic links to the VxFS commands and the online manual pages are installed in
the /opt/VRTS/bin directory and the /opt/VRTS/man directory, respectively. Be
sure to add the command directory to your PATH, and the manual page directory to
your MANPATH environment variables (see “Command Installation Verification” on
page 29 for information on other VxFS command path names).
10. The installation procedure modifies the /etc/system file on each host by adding the
following lines:
* vxfs_START -- do not remove the following lines:
* VxFS requires a stack size greater than the default 8K.
* The following value allows the kernel stack size to be
* increased to 24K for Solaris 7, 8 and 9.
set lwp_default_stksize=0x6000
* vxfs_END
The original /etc/system file is copied to /etc/fs/vxfs/system.preinstall.
The modifications are removed during a pkgrm.


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/173/showart_32254.html