FreeBSD的配置

charkesiii

2004-07-30          点击:
369
FreeBSD的配置
配置网络：/etc/rc.conf
network_interface="dc0 lo0"
ifconfig_dc0="192.168.2.11"
defaultrouter="192.168.2.1"
远程登陆
FreeBSD远程登陆默认的是ssh，但是不能su到root，为了能su到root，打开/etc/group文件把你的用户名添加的wheel组中：
wheel:*:0:root,name
重新配置内核
#cd /usr/src/sys/i386/conf
#cp GENERIC MYKERNEL
编辑MYKERNEL加入
options IPSEC
options IPSEC_ESP
options IPSEC_DEBUG
然后
#/usr/sbin/config MYKERNEL
#cd ../compile/MYKERNEL
#make depend
#make
#make install
安装racoon
#cd /usr/ports/security/racoon
#make install clean
要确保你的/usr/ports/distfiles目录中有racoon-20021120a.tar.gz，没有的话就下一个吧。
3.创建证书
认证的方法选择证书的方法。利用OpenSSL来创建证书。
首先创建CA，然后为将要互连的两个计算机发放证书。先创建RSA公私钥对，然后创建子签名的证书。
创建CA
$ openssl genrsa -des3 -out ca.key 1024
warning, not much extra random data, consider using the -rand option
Generating RSA private key, 1024 bit long modulus
..............++++++
................++++++
e is 65537 (0x10001)
Enter PEM pass phrase: fearBeans
Verifying password - Enter PEM pass phrase: fearBeans
$ openssl req -new -x509 -days 365 -key ca.key -out ca.crt
Using configuration from /etc/ssl/openssl.cnf
Enter PEM pass phrase: fearBeans
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:CN
State or Province Name (full name) [Some-State]:Heilongjiang
Locality Name (eg, city) []:Daqing
Organization Name (eg, company) [Internet Widgits Pty Ltd]:Linuxdevice
Organizational Unit Name (eg, section) []:
Common Name (eg, YOUR name) []:zhangp
Email Address []:zhangp@cy9.dq.cnpc.com.cn
为主机创建证书，首先创建RSA私钥，然后创建CA签名的证书。
$ openssl genrsa -out win2k.key 1024
warning, not much extra random data, consider using the -rand option
Generating RSA private key, 1024 bit long modulus
.....++++++
.....++++++
e is 65537 (0x10001)
$ openssl req -new -key win2k.key -out win2k.csr
Using configuration from /etc/ssl/openssl.cnf
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:CN
State or Province Name (full name) [Some-State]:Heilongjiang
Locality Name (eg, city) []:Daqing
Organization Name (eg, company) [Internet Widgits Pty Ltd]:Linuxdevice
Organizational Unit Name (eg, section) []:
Common Name (eg, YOUR name) []:win2k
Email Address []:win2k@cy9.dq.cnpc.com.cn
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:
$ openssl x509 -req -days 182 -in win2k.csr -CA ca.crt -CAkey ca.key -CAcreateserial -out win2k.crt
Signature ok
subject=/C=CN/ST=Heilongjiang/L=Daqing/O=Linuxdevice/
CN=win2k/Email=win2k@cy9.dq.cnpc.com.cn
Getting CA Private Key
Enter PEM pass phrase: 123456
类似的为主机freebsd创建证书。对于win2k的证书来说，还要做成PKCS12的格式。
$ openssl pkcs12 -export -inkey win2k.key -certfile ca.crt -in win2k.crt -out win2k.p12
Enter Export Password: 123456
Verifying password - Enter Export Password: 123456
配置FreeBSD
准备配置文件 /etc/ipsec.conf，其中192.168.2.11为FreeBSD，192.168.2.6为win2k：
spdadd 192.168.2.11/32 192.168.2.6/32 any -P out ipsec
esp/transport/192.168.2.11-192.168.2.6/require;
spdadd 192.168.2.6/32 192.168.2.11/32 any -P in ipsec
esp/transport/192.168.2.6-192.168.2.11/require;
在配置文件/etc/rc.conf中加入：
ipsec_enable="YES"
准备配置文件/usr/local/etc/racoon/racoon.conf:
# Directory in which we will store this, and other machines' certificates
path certificate "/usr/local/etc/racoon/certs" ;
log debug2;
# Padding values. These have been copied verbatim from the example.
padding
{
maximum_length 20; # maximum padding length.
randomize off; # enable randomize length.
strict_check off; # enable strict check.
exclusive_tail off; # extract last one octet.
}
# Timer values. I've bumped up the phase 1 & 2 timeouts.
timer
{
# These value can be changed per remote node.
counter 5; # maximum trying count to send.
interval 20 sec; # maximum interval to resend.
persend 1; # the number of packets per a send.
# timer for waiting to complete each phase.
phase1 90 sec;
phase2 60 sec;
}
remote anonymous
{
exchange_mode main,aggressive;
#exchange_mode aggressive,main;
doi ipsec_doi;
situation identity_only;
my_identifier user_fqdn "zhangp@cy9.dq.cnpc.com.cn";
peers_identifier user_fqdn "win2k@cy9.dq.cnpc.com.cn";
certificate_type x509 "freebsd.crt" "freebsd.key";
peers_certfile "win2k.crt";
nonce_size 16;
lifetime time 4 hour; # sec,min,hour
initial_contact on;
support_mip6 on;
proposal_check obey; # obey, strict or claim
# This is the same as one of the default proposals on Windows.
# 3DES, MD5 and RSA (certificate) authentication.
proposal {
encryption_algorithm 3des;
hash_algorithm md5;
authentication_method rsasig;
dh_group 2 ;
}
}
sainfo anonymous
{
pfs_group 1;
lifetime time 30 sec;
encryption_algorithm 3des,des ;
authentication_algorithm hmac_sha1,hmac_md5;
compression_algorithm deflate ;
}
把证书存储到/usr/local/etc/racoon/certs中：
#mkdir -m 0700 /usr/local/etc/racoon/certs
#cp freebsd.crt freebsd.key win2k.crt /usr/local/etc/racoon/certs
#chmod 0600 /usr/local/etc/racoon/certs/*
现在可以启动守护程序racoon了
#racoon


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/19568/showart_190537.html