免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1495 | 回复: 0
打印 上一主题 下一主题

SolarisX86系统初始化配置sys-config命令的详细配置过程笔记 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2006-03-30 16:05 |只看该作者 |倒序浏览

My cublog:
http://www.cublog.cn/u/14514/
My ID:deeperbluer





1、运行中的系统中,键入:
   #sys-unconfig
                            WARNING
This program will unconfigure your system.  It will cause it
to revert to a "blank" system - it will not have a name or know
about other systems or networks.
This program will also halt the system.
Do you want to continue (y/n) ? y
   #此时系统重新启动
2、启动过程中的reconfigure:
   系统启动到b or i选择模式之前会提示:
   If system hardware has change,or to boot from a different device,interrupt the autoboot process by pressing ESC.
Initializing system
Plases Wait...
可以“ESC”忽略reconfigure(此过程很快),之后就进入Solaris的启动过程,在自检完毕后即会进入初始配置的Prompt的模式。
   a)Select a Language
     0.English
    %1.Simplified Chinese
   b)Select a Locale
    %0.Simplified Chinese EUC
     1.Simplified Chinese EUC
     2.Simplified Chinese GB18030
     3.Simplified Chinese GBK
     4.Simplified Chinese GBK
     5.Simplified Chinese UTF-8
     6.Simplified Chinese UTF-8
     7.Go Back to Previous Screen
    Creating new rsa public/private host key pair
    Creating new dsr public/private host key pair
   c)蓝屏模式下的kdmconfig配置
    _________________________________________________________________________   
    X Server Selection
    ------------------
    [ ]Xorg server
    [%]Xsun server
    F2_Continue F3_Quit Without Save F6_Help
    _________________________________________________________________________
    Configure Device
    -----------------
    [%]No changes needed - Test/Save and Exit
    [ ]Change Video Device/Monitor
    [ ]Change Keyboard
    [ ]Change Pointing Device  

    F2_Continue F3_Quit Without Save F6_Help
    _________________________________________________________________________
    kdmconfig配置完毕
    F4_Save and Exit
    F2_Continue F3_Quit Without Save F4_Save and Exit F6_Help   
   
    d)以下开始系统的配置:
    _________________________________________________________________________
    Configuring network interface addresses:rh0(仅作为网卡的名称提示,不需任何操作,只需等待)
    进入蓝屏配置模式:
   
    Networked
    ------------
    [%] Yes
    [ ] No
   
    F2_Continue F6_Help
    _________________________________________________________________________
    Use DHCP for rh0
    ----------------
    [ ]Yes
    [%]No
    F2_Continue F6_Help
    _________________________________________________________________________
    Host name for rh0 [solaris]        以下[]内为手工输入的部分
    F2_Continue F6_Help
    _________________________________________________________________________
    IP address for rh0 [210.10.3.159]
    F2_Continue F6_Help
    _________________________________________________________________________
    System part of a subnet
    -----------------------
    [%]Yes
    [ ]No
    F2_Continue F6_Help
    _________________________________________________________________________
    Netmask for rh0 [255.255.255.0]
    F2_Continue F6_Help
    _________________________________________________________________________
    Enable IPv6 for rh0
    -------------------
    [ ]Yes
    [%]No
    F2_Continue F6_Help
    Configuring parameters, 25 seconds left to complete   弹出提示,需要等待25秒的时间
    _________________________________________________________________________
    Comfirm Information for rh0    有关以上rh0网卡设备配置的信息汇总,修改和确认提交都可以
                  Networked : Ues
                   Use DHCP : No
                  Host name : solaris
                 IP address : 210.10.3.159
    System part of a subnet : Yes
                    Netmask : 255.255.255.0
                Enable IPv6 : No
    F2_Continue F4_Change F6_Help
    Configuring parameters, 25 seconds left to complete   弹出提示,需要等待25秒的时间
    _________________________________________________________________________
    Configure Kerberos Security
    ---------------------------
    [ ]Yes
    [%]No
    F2_Continue F6_Help
    Comfirm Information  提交确认
    Confirure Kerberos Security:NO
   
    F2_Continue F4_Change F6_Help
    _________________________________________________________________________
    Name service
    ------------
    [ ]NIS +
    [ ]NIS
    [ ]DNS
    [ ]LDAP
    [%]None
   
    F2_Continue F6_Help
    Comfirm Information  提交确认
   
    Name service:None
    F2_Continue F4_Change F6_Help
    _________________________________________________________________________
    Continents and Oceans
    ---------------------
    [ ]Africa
    [ ]Americas
    [ ]Antarctica
    [ ]Arctic Ocean
    [%]Asia
    [ ]Atlantic Ocean
    [ ]Australia
    [ ]Europe
    [ ]Indian Ocean
    [ ]Pacific Ocean
    F2_Continue F6_Help
    Country or Region
    -----------------
    [ ]Afghanistan
    [ ]Armenia
    [ ]Azerbaijan
    [ ]Bahrain
    [ ]Bangladesh
    [ ]Bhutan
    [ ]Brunei
    [ ]Cambodia
    [%]China
    [ ]Cyprus
    [ ]East Timor
    [ ]Georgia
    [ ]Hong Kong
    [ ]India
    F2_Continue F6_Help
    _________________________________________________________________________
    Date and Time
    Date and time:2006-03-30 15:33
    Year    (4 digits):2006
    Month   (1-12)    :03
    Day     (1-31)    :30
    Hour    (0-23)    :15
    Minute  (0-59)    :33
    F2_Continue F6_Help
    Confirm Information    提交确认
        Time Zone:PRC
    Date and time:2006-03-30 15:33
    F2_Continue F4_Change F6_Help
    _________________________________________________________________________
    Root Password
    Root password:********
    Root password:********
   
    F2_Continue F6_Help
    _________________________________________________________________________
    System identification is complete.
    This system is configured with NFS version 4, which uses a domain name that is automatically derived from the systems name services.The derived domain name is sufficient for most configurations. In a few cases, mounts that cross different domains might cause files to be owned by "nonody" due to the lack of a common domain name.
    Do you need to override the system's default NFS version 4 domain name(yes/no)?[no]:[enter]
    _________________________________________________________________________
    reboot......



本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/14514/showart_92941.html
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP