add disk to solaris on vmware

jack_zheng

First add disk(IDE or SCSI) on vmware. The after the system bootup, run the following commands,(
http://bbs.chinaunix.net/viewthread.php?tid=704996
)

before new vmware disks added, not sure what c1t0d0 is used for.
# ls /dev/rdsk/
c0d0p0     c0d0s0     c0d0s13    c0d0s4     c0d0s9     c1t0d0p4   c1t0d0s12  c1t0d0s3   c1t0d0s8
c0d0p1     c0d0s1     c0d0s14    c0d0s5     c1t0d0p0   c1t0d0s0   c1t0d0s13  c1t0d0s4   c1t0d0s9
c0d0p2     c0d0s10    c0d0s15    c0d0s6     c1t0d0p1   c1t0d0s1   c1t0d0s14  c1t0d0s5
c0d0p3     c0d0s11    c0d0s2     c0d0s7     c1t0d0p2   c1t0d0s10  c1t0d0s15  c1t0d0s6
c0d0p4     c0d0s12    c0d0s3     c0d0s8     c1t0d0p3   c1t0d0s11  c1t0d0s2   c1t0d0s7

# drvconfig ( configure the /devices directory )
# disks ( creates /dev entries for hard disks attached to the system )
# ls /dev/rdsk/
c0d0p0     c0d0s15    c0d1p3     c0d1s4     c1d1s1     c1d1s7     c1t0d0s12  c2t0d0p0   c2t0d0s15
c0d0p1     c0d0s2     c0d1p4     c0d1s5     c1d1s10    c1d1s8     c1t0d0s13  c2t0d0p1   c2t0d0s2
c0d0p2     c0d0s3     c0d1s0     c0d1s6     c1d1s11    c1d1s9     c1t0d0s14  c2t0d0p2   c2t0d0s3
c0d0p3     c0d0s4     c0d1s1     c0d1s7     c1d1s12    c1t0d0p0   c1t0d0s15  c2t0d0p3   c2t0d0s4
c0d0p4     c0d0s5     c0d1s10    c0d1s8     c1d1s13    c1t0d0p1   c1t0d0s2   c2t0d0p4   c2t0d0s5
c0d0s0     c0d0s6     c0d1s11    c0d1s9     c1d1s14    c1t0d0p2   c1t0d0s3   c2t0d0s0   c2t0d0s6
c0d0s1     c0d0s7     c0d1s12    c1d1p0     c1d1s15    c1t0d0p3   c1t0d0s4   c2t0d0s1   c2t0d0s7
c0d0s10    c0d0s8     c0d1s13    c1d1p1     c1d1s2     c1t0d0p4   c1t0d0s5   c2t0d0s10  c2t0d0s8
c0d0s11    c0d0s9     c0d1s14    c1d1p2     c1d1s3     c1t0d0s0   c1t0d0s6   c2t0d0s11  c2t0d0s9
c0d0s12    c0d1p0     c0d1s15    c1d1p3     c1d1s4     c1t0d0s1   c1t0d0s7   c2t0d0s12
c0d0s13    c0d1p1     c0d1s2     c1d1p4     c1d1s5     c1t0d0s10  c1t0d0s8   c2t0d0s13
c0d0s14    c0d1p2     c0d1s3     c1d1s0     c1d1s6     c1t0d0s11  c1t0d0s9   c2t0d0s14
Note that c0d1,c1d1 are two new IDE disks added. and c2t0d0 is a new SCSI disk added. c0d0 is the root disk. Not sure what c1t0d0 is(swap?).
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
       0. c0d0
          /pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0
       1. c0d1
          /pci@0,0/pci-ide@7,1/ide@0/cmdk@1,0
       2. c1d1
          /pci@0,0/pci-ide@7,1/ide@1/cmdk@1,0
       3. c2t0d0
          /pci@0,0/pci1000,30@10/sd@0,0
Specify disk (enter its number):



本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u1/38597/showart_300025.html