VXvm 配置controle

keelee

#pathgroups
#KAPL10704-I dlmvxexclude terminated normally.
controllers
c2 /pci@8,600000/SUNW,qlc@1/fp@0,0
c3 /pci@8,600000/SUNW,qlc@2/fp@0,0
c5 /pseudo/dlmndrv@2
#
product
#
pathgroups
#
[email=root@MEB1]root@MEB1[/email]
# vxdiskadm
Volume Manager Support Operations
Menu: VolumeManager/Disk
1      Add or initialize one or more disks
2      Encapsulate one or more disks
3      Remove a disk
4      Remove a disk for replacement
5      Replace a failed or removed disk
6      Mirror volumes on a disk
7      Move volumes from a disk
8      Enable access to (import) a disk group
9      Remove access to (deport) a disk group
10     Enable (online) a disk device
11     Disable (offline) a disk device
12     Mark a disk as a spare for a disk group
13     Turn off the spare flag on a disk
14     Unrelocate subdisks back to a disk
15     Exclude a disk from hot-relocation use
16     Make a disk available for hot-relocation use
17     Prevent multipathing/Suppress devices from VxVM's view
18     Allow multipathing/Unsuppress devices from VxVM's view
19     List currently suppressed/non-multipathed devices
20     Change the disk naming scheme
21     Get the newly connected/zoned disks in VxVM view
22     Change/Display the default disk layouts
23     Mark a disk as allocator-reserved for a disk group
24     Turn off the allocator-reserved flag on a disk
list   List disk information
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: 17
Exclude Devices
Menu: VolumeManager/Disk/ExcludeDevices
  VxVM  INFO V-5-2-1239
This operation might lead to some devices being suppressed from VxVM's view
  or prevent them from being multipathed by vxdmp (This operation can be
  reversed using the vxdiskadm command).
Do you want to continue ? [y,n,q,?] (default: y)
Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: 1
Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
  Use this operation to exclude all paths through a controller from VxVM.  
  This operation can be reversed using the vxdiskadm command.
  VxVM  INFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
  the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
  the controllers on the host. To see the list of controllers on the system,
  type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] list
  VxVM  INFO V-5-2-1214 The following controllers were found on the system :
   c1              c2              c3              c4              
   c5              
Hit RETURN to continue.
Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
  Use this operation to exclude all paths through a controller from VxVM.  
  This operation can be reversed using the vxdiskadm command.
  VxVM  INFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
  the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
  the controllers on the host. To see the list of controllers on the system,
  type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c2
  VxVM  INFO V-5-2-1306
All paths to the following enclosures through controller c2 will be hidden
  from VxVM as a result of this operation :
   AMS_WMS1        AMS_WMS0        
Continue operation? [y,n,q,?] (default: y)
Apr 20 16:11:41 MEDB1 last message repeated 11 times
Apr 20 16:11:45 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@1/fp@0,0 connected to disk array 77011034
Apr 20 16:11:45 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@1/fp@0,0 connected to disk array 77011077
  VxVM  NOTICE V-5-2-1323
The controller c2 will be disabled. The entries for paths on controller c2
  will still be visible through VxVM utilities in a disabled state till a
  reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.
Do you wish to exclude more controllers ? [y,n,q,?] (default: n) y

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
  Use this operation to exclude all paths through a controller from VxVM.  
  This operation can be reversed using the vxdiskadm command.
  VxVM  INFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
  the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
  the controllers on the host. To see the list of controllers on the system,
  type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c3
  VxVM  INFO V-5-2-1306
All paths to the following enclosures through controller c3 will be hidden
  from VxVM as a result of this operation :
   AMS_WMS1        AMS_WMS0        
Continue operation? [y,n,q,?] (default: y)
Apr 20 16:11:59 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@2/fp@0,0 connected to disk array 77011034
Apr 20 16:11:59 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@2/fp@0,0 connected to disk array 77011077
  VxVM  NOTICE V-5-2-1323
The controller c3 will be disabled. The entries for paths on controller c3
  will still be visible through VxVM utilities in a disabled state till a
  reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.Apr 20 16:12:00 MEDB1 picld[292]: Device PS0 AC UNAVAILABLE
Do you wish to exclude more controllers ? [y,n,q,?] (default: n) y

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
  Use this operation to exclude all paths through a controller from VxVM.  
  This operation can be reversed using the vxdiskadm command.
  VxVM  INFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
  the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
  the controllers on the host. To see the list of controllers on the system,
  type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c5
  VxVM  INFO V-5-2-1306
All paths to the following enclosures through controller c5 will be hidden
  from VxVM as a result of this operation :
   AMS_WMS1        AMS_WMS0        
Continue operation? [y,n,q,?] (default: y)
Apr 20 16:12:16 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pseudo/dlmndrv@2 connected to disk array 77011034
  VxVM  NOTICE V-5-2-1323
The controller c5 will be disabled. The entries for paths on controller c5
  will still be visible through VxVM utilities in a disabled state till a
  reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.Apr 20 16:12:16 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pseudo/dlmndrv@2 connected to disk array 77011077
Do you wish to exclude more controllers ? [y,n,q,?] (default: n)

Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: 8

Devices hidden from VxVM / not multipathed by vxdmp
Menu: VolumeManager/Disk/ExcludeDevices/listexclude
  VxVM  INFO V-5-2-1215
The following is the list of devices currently hidden from VxVM or not
  multipathed by vxdmp:
VxVM vxdmpadm ERROR V-5-1-3996  File not in correct format
Hit RETURN to continue.Apr 20 16:12:27 MEDB1 picld[292]: Device PS0 AC UNAVAILABLE
Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: 8
Devices hidden from VxVM / not multipathed by vxdmp
Menu: VolumeManager/Disk/ExcludeDevices/listexclude
  VxVM  INFO V-5-2-1215
The following is the list of devices currently hidden from VxVM or not
  multipathed by vxdmp:
VxVM vxdmpadm ERROR V-5-1-3996  File not in correct format
Hit RETURN to continue.

Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: q

Volume Manager Support Operations
Menu: VolumeManager/Disk
1      Add or initialize one or more disks
2      Encapsulate one or more disks
3      Remove a disk
4      Remove a disk for replacement
5      Replace a failed or removed disk
6      Mirror volumes on a disk
7      Move volumes from a disk
8      Enable access to (import) a disk group
9      Remove access to (deport) a disk group
10     Enable (online) a disk device
11     Disable (offline) a disk device
12     Mark a disk as a spare for a disk group
13     Turn off the spare flag on a disk
14     Unrelocate subdisks back to a disk
15     Exclude a disk from hot-relocation use
16     Make a disk available for hot-relocation use
17     Prevent multipathing/Suppress devices from VxVM's view
18     Allow multipathing/Unsuppress devices from VxVM's view
19     List currently suppressed/non-multipathed devices
20     Change the disk naming scheme
21     Get the newly connected/zoned disks in VxVM view
22     Change/Display the default disk layouts
23     Mark a disk as allocator-reserved for a disk group
24     Turn off the allocator-reserved flag on a disk
list   List disk information
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: q
  VxVM vxdiskadm NOTICE V-5-2-1187 Please wait while the device suppression/unsuppression operations take effect.
Goodbye.
[email=root@MEB1]root@MEB1[/email]
#
[email=root@MEB1]root@MEB1[/email]
#
[email=root@MEB1]root@MEB1[/email]
# ls
alloc                isis                 vold_request
apmkey.d             jbod.info            vras
array.info           lib                  vss
aslkey.d             licenses             vss57
bin                  log                  vvr
cbr                  reconfig.d           vvrports
ddl.support          slib                 vvrports.template
diag.d               type                 vxadm
disk.info            upgrade.d            vxdmp.exclude
disk.info.old        voladm.d             vxesd
dmpevents.log        volboot              vxtunables.template
es_scripts           vold_diag            vxvm.exclude
exclude.tmp          vold_inquiry
[email=root@MEB1]root@MEB1[/email]
# rm vxvm.exclude
[email=root@MEB1]root@MEB1[/email]
# rm vxdmp.exclude
[email=root@MEB1]root@MEB1[/email]
#
[email=root@MEB1]root@MEB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
# vxdiskadm
bash: vxdiskdm: command not found
[email=root@MEDB1]root@MEDB1[/email]
# vxdiskdmkadm

Volume Manager Support Operations
Menu: VolumeManager/Disk
1      Add or initialize one or more disks
2      Encapsulate one or more disks
3      Remove a disk
4      Remove a disk for replacement
5      Replace a failed or removed disk
6      Mirror volumes on a disk
7      Move volumes from a disk
8      Enable access to (import) a disk group
9      Remove access to (deport) a disk group
10     Enable (online) a disk device
11     Disable (offline) a disk device
12     Mark a disk as a spare for a disk group
13     Turn off the spare flag on a disk
14     Unrelocate subdisks back to a disk
15     Exclude a disk from hot-relocation use
16     Make a disk available for hot-relocation use
17     Prevent multipathing/Suppress devices from VxVM's view
18     Allow multipathing/Unsuppress devices from VxVM's view
19     List currently suppressed/non-multipathed devices
20     Change the disk naming scheme
21     Get the newly connected/zoned disks in VxVM view
22     Change/Display the default disk layouts
23     Mark a disk as allocator-reserved for a disk group
24     Turn off the allocator-reserved flag on a disk
list   List disk information
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: 17
Exclude Devices
Menu: VolumeManager/Disk/ExcludeDevices
  VxVM  INFO V-5-2-1239
This operation might lead to some devices being suppressed from VxVM's view
  or prevent them from being multipathed by vxdmp (This operation can be
  reversed using the vxdiskadm command).
Do you want to continue ? [y,n,q,?] (default: y)

Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: 1

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
  Use this operation to exclude all paths through a controller from VxVM.  
  This operation can be reversed using the vxdiskadm command.
  VxVM  INFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
  the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
  the controllers on the host. To see the list of controllers on the system,
  type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c2
  VxVM  INFO V-5-2-1306
All paths to the following enclosures through controller c2 will be hidden
  from VxVM as a result of this operation :
   AMS_WMS1        AMS_WMS0        
Continue operation? [y,n,q,?] (default: y)
Apr 20 16:12:46 MEDB1 last message repeated 2 times
Apr 20 16:13:12 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@1/fp@0,0 connected to disk array 77011034
Apr 20 16:13:12 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@1/fp@0,0 connected to disk array 77011077
  VxVM  NOTICE V-5-2-1323
The controller c2 will be disabled. The entries for paths on controller c2
  will still be visible through VxVM utilities in a disabled state till a
  reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.Apr 20 16:13:12 MEDB1 picld[292]: Device PS0 AC UNAVAILABLE
Do you wish to exclude more controllers ? [y,n,q,?] (default: n) y

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
  Use this operation to exclude all paths through a controller from VxVM.  
  This operation can be reversed using the vxdiskadm command.
  VxVM  INFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
  the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
  the controllers on the host. To see the list of controllers on the system,
  type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c3
  VxVM  INFO V-5-2-1306
All paths to the following enclosures through controller c3 will be hidden
  from VxVM as a result of this operation :
   AMS_WMS1        AMS_WMS0        
Continue operation? [y,n,q,?] (default: y)
Apr 20 16:13:24 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@2/fp@0,0 connected to disk array 77011034
Apr 20 16:13:24 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pci@8,600000/SUNW,qlc@2/fp@0,0 connected to disk array 77011077
  VxVM  NOTICE V-5-2-1323
The controller c3 will be disabled. The entries for paths on controller c3
  will still be visible through VxVM utilities in a disabled state till a
  reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.
Do you wish to exclude more controllers ? [y,n,q,?] (default: n) y

Exclude controllers from VxVM
Menu: VolumeManager/Disk/ExcludeDevices/CTLR-VXVM
  Use this operation to exclude all paths through a controller from VxVM.  
  This operation can be reversed using the vxdiskadm command.
  VxVM  INFO V-5-2-1263
You can specify a controller name at the prompt. A controller name is of
  the form c#, example c3, c11 etc. Enter 'all' to exclude all paths on all
  the controllers on the host. To see the list of controllers on the system,
  type 'list'.
Enter a controller name [,all,list,list-exclude,q,?] c5
  VxVM  INFO V-5-2-1306
All paths to the following enclosures through controller c5 will be hidden
  from VxVM as a result of this operation :
   AMS_WMS1        AMS_WMS0        
Continue operation? [y,n,q,?] (default: y)
Apr 20 16:13:35 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pseudo/dlmndrv@2 connected to disk array 77011034
Apr 20 16:13:35 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-0 disabled controller /pseudo/dlmndrv@2 connected to disk array 77011077
  VxVM  NOTICE V-5-2-1323
The controller c5 will be disabled. The entries for paths on controller c5
  will still be visible through VxVM utilities in a disabled state till a
  reboot. After a reboot these entries will not be seen.
Hit RETURN to continue.
Do you wish to exclude more controllers ? [y,n,q,?] (default: n)

Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: Apr 20 16:13:38 MEDB1 picld[292]: Device PS0 AC UNAVAILABLE
8
Devices hidden from VxVM / not multipathed by vxdmp
Menu: VolumeManager/Disk/ExcludeDevices/listexclude
  VxVM  INFO V-5-2-1215
The following is the list of devices currently hidden from VxVM or not
  multipathed by vxdmp:
Devices excluded from VxVM:
--------------------------
Paths : None
Controllers :   c2      c3      c5      
VID:PID : None
Devices excluded from multipathing by vxdmp:
-------------------------------------------
Paths : None
VID:PID : None
Pathgroups : None
----------
Hit RETURN to continue.
Volume Manager Device Operations
Menu: VolumeManager/Disk/ExcludeDevices
1      Suppress all paths through a controller from VxVM's view
2      Suppress a path from VxVM's view
3      Suppress disks from VxVM's view by specifying a VID:PID combination
4      Suppress all but one paths to a disk
5      Prevent multipathing of all disks on a controller by VxVM
6      Prevent multipathing of a disk by VxVM
7      Prevent multipathing of disks by specifying a VID:PID combination
8      List currently suppressed/non-multipathed devices
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: q

Volume Manager Support Operations
Menu: VolumeManager/Disk
1      Add or initialize one or more disks
2      Encapsulate one or more disks
3      Remove a disk
4      Remove a disk for replacement
5      Replace a failed or removed disk
6      Mirror volumes on a disk
7      Move volumes from a disk
8      Enable access to (import) a disk group
9      Remove access to (deport) a disk group
10     Enable (online) a disk device
11     Disable (offline) a disk device
12     Mark a disk as a spare for a disk group
13     Turn off the spare flag on a disk
14     Unrelocate subdisks back to a disk
15     Exclude a disk from hot-relocation use
16     Make a disk available for hot-relocation use
17     Prevent multipathing/Suppress devices from VxVM's view
18     Allow multipathing/Unsuppress devices from VxVM's view
19     List currently suppressed/non-multipathed devices
20     Change the disk naming scheme
21     Get the newly connected/zoned disks in VxVM view
22     Change/Display the default disk layouts
23     Mark a disk as allocator-reserved for a disk group
24     Turn off the allocator-reserved flag on a disk
list   List disk information
?      Display help about menu
??     Display help about the menuing system
q      Exit from menus
Select an operation to perform: q
  VxVM vxdiskadm NOTICE V-5-2-1187 Please wait while the device suppression/unsuppression operations take effect.
Goodbye.
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
# ls
alloc                jbod.info            vras
apmkey.d             lib                  vss
array.info           licenses             vss57
aslkey.d             log                  vvr
bin                  reconfig.d           vvrports
cbr                  slib                 vvrports.template
ddl.support          type                 vxadm
diag.d               upgrade.d            vxdmp.exclude
disk.info            voladm.d             vxesd
disk.info.old        volboot              vxtunables.template
dmpevents.log        vold_diag            vxvm.exclude
es_scripts           vold_inquiry
isis                 vold_request
[email=root@MEDB1]root@MEDB1[/email]
# TERM=vt100
[email=root@MEDB1]root@MEDB1[/email]
# export TERM
[email=root@MEDB1]root@MEDB1[/email]
# vi vxvm.exclude
[?1h="vxvm.exclude" 12 lines, 150 characters exclude_all 0
paths
#
controllers
c2 /pci@8,600000/SUNW,qlc@1/fp@0,0
c3 /pci@8,600000/SUNW,qlc@2/fp@0,0
c5 /pseudo/dlmndrv@2
#product
#pathgroups
#
~
~
~
~
~
~
~
~
~
~
~"vxvm.exclude" 12 lines, 150 characters

78M8
c2t50060E801002B1A1d3s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,3
78M8
c2t50060E801002B1A1d4s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,4
78M8c2t50060E801002B1A1d7s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,7
78M8c2t50060E801002B1A1d8s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,8
78M8c2t50060E801002B1A1d9s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a1,9
78M8c2t50060E801002B1A5d3s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,3
78M8c2t50060E801002B1A5d4s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,4
78M8c2t50060E801002B1A5d7s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,7
78M8c2t50060E801002B1A5d8s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,8
78M8c2t50060E801002B1A5d9s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b1a5,9
78M8c2t50060E801002B451d2s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b451,2
78M8c2t50060E801002B451d4s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b451,4
78M8c2t50060E801002B451d5s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b451,5
78M8c2t50060E801002B451d6s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b451,6
78M8c2t50060E801002B455d2s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b455,2
78M8c2t50060E801002B455d4s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b455,4
78M8
c2t50060E801002B455d5s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b455,5
78M8
c2t50060E801002B455d6s2 /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e801002b455,6
78M8
c3t50060E801002B1A0d3s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,3
78M8
c3t50060E801002B1A0d4s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,4
c3t50060E801002B1A0d7s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,7
c3t50060E801002B1A0d8s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,8
c3t50060E801002B1A0d9s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a0,9
c3t50060E801002B1A4d3s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,3
c3t50060E801002B1A4d4s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,4
c3t50060E801002B1A4d7s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,7
c3t50060E801002B1A4d8s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,8
c3t50060E801002B1A4d9s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b1a4,9
c3t50060E801002B450d2s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b450,2
c3t50060E801002B450d4s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b450,4
c3t50060E801002B450d5s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b450,5
c3t50060E801002B450d6s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b450,6
c3t50060E801002B454d2s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b454,2
c3t50060E801002B454d4s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b454,4
c3t50060E801002B454d5s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b454,5
c3t50060E801002B454d6s2 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w50060e801002b454,6
c4t50060E801002B1A5d3s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,3
c4t50060E801002B1A5d4s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,4
c4t50060E801002B1A5d7s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,7
c4t50060E801002B1A5d8s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,8
c4t50060E801002B1A5d9s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b1a5,9
c4t50060E801002B455d2s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b455,2
c4t50060E801002B455d4s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b455,4
c4t50060E801002B455d5s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b455,5
c4t50060E801002B455d6s2 /pseudo/dlmndrv@1/dlmfdrv@w50060e801002b455,6
c5t50060E801002B1A0d3s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,3
c5t50060E801002B1A0d4s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,4
c5t50060E801002B1A0d7s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,7
c5t50060E801002B1A0d8s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,8
c5t50060E801002B1A0d9s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a0,9
c5t50060E801002B1A4d3s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,3
c5t50060E801002B1A4d4s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,4
c5t50060E801002B1A4d7s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,7
c5t50060E801002B1A4d8s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,8
c5t50060E801002B1A4d9s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b1a4,9
c5t50060E801002B450d2s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b450,2
c5t50060E801002B450d4s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b450,4
c5t50060E801002B450d5s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b450,5
c5t50060E801002B450d6s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b450,6
c5t50060E801002B454d2s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b454,2
c5t50060E801002B454d4s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b454,4
c5t50060E801002B454d5s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b454,5
c5t50060E801002B454d6s2 /pseudo/dlmndrv@2/dlmfdrv@w50060e801002b454,6
:wq!
"vxvm.exclude" 75 lines, 4920 characters
[?1l>root@MEDB1 #
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
# ls
alloc                jbod.info            vras
apmkey.d             lib                  vss
array.info           licenses             vss57
aslkey.d             log                  vvr
bin                  reconfig.d           vvrports
cbr                  slib                 vvrports.template
ddl.support          type                 vxadm
diag.d               upgrade.d            vxdmp.exclude
disk.info            voladm.d             vxesd
disk.info.old        volboot              vxtunables.template
dmpevents.log        vold_diag            vxvm.exclude
es_scripts           vold_inquiry
isis                 vold_request
[email=root@MEDB1]root@MEDB1[/email]
# vxdctl enable
Apr 20 16:14:05 MEDB1 last message repeated 1 time
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x30 belonging to the dmpnode 285/0x30
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x70 belonging to the dmpnode 285/0x18
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x90 belonging to the dmpnode 285/0x20
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x50 belonging to the dmpnode 285/0x28
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x10 belonging to the dmpnode 285/0x10
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0xb0 belonging to the dmpnode 285/0x48
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0x110 belonging to the dmpnode 285/0x50
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0xf0 belonging to the dmpnode 285/0x40
Apr 20 16:14:23 MEDB1 vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 294/0xd0 belonging to the dmpnode 285/0x38
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
# sync'sync'
[email=root@MEDB1]root@MEDB1[/email]
# Apr 20 16:14:31 MEDB1 picld[292]: Device PS0 AC UNAVAILABLE
sync
[email=root@MEDB1]root@MEDB1[/email]
# sync
[email=root@MEDB1]root@MEDB1[/email]
#
[email=root@MEDB1]root@MEDB1[/email]
# init 6
[email=root@MEDB1]root@MEDB1[/email]
#
INIT: New run level: 6
The system is coming down.  Please wait.
System services are now being stopped.
Stop HNTRLib2 monitor daemon
Apr 20 16:14:57 MEDB1 gab: GAB INFO V-15-1-20032 Port v closed
Apr 20 16:14:57 MEDB1 gab: GAB INFO V-15-1-20032 Port w closed
Apr 20 16:14:57 MEDB1 picld[292]: Device PS0 AC UNAVAILABLE
Apr 20 16:14:59 MEDB1 gab: GAB INFO V-15-1-20032 Port h closed
Broken Pipe
Stopping vxfen..
Stopping vxfen.. Done
Apr 20 16:15:00 MEDB1 gab: GAB INFO V-15-1-20032 Port b closed


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/9710/showart_301426.html